Resumen del contenido incluido en la página 1 
                    
                        ™
Paramount XD 
Manual Wheelchair
User Manual
GF0700137RevA07 
©GF Health Products, Inc. 
September 2007
Read this manual before operating your wheelchair.
Save this manual for future reference.                                                                                                                                                                                                                                                                                                                  
                    
                    Resumen del contenido incluido en la página 2 
                    
                        Contents 1Int 		 RODuctIOn 	...........................................................................3 		IMPOR t Ant	SAFety	PRecAutIOnS 	 ..........................................5 3Gett 		 InG	St ARteD 	......................................................................8 4	HAnDlInG	 tIPS 	 ...........................................................................9 5		 ADjuStMentS 	.........................................................................13 6tRA 		 nSPOR tInG	 tHe	e&j	P A
                    
                    Resumen del contenido incluido en la página 3 
                    
                        1		 IntRODuctIOn Important safety, operating, and maintenance instructions that  warrant your attention are included in this user manual. Read this  entire manual carefully before operating your new wheelchair, keep  it handy for future reference, and refer to it as often as necessary to  help maintain good performance standards. Consult your healthcare professional and Graham-Field Health  Products dealer for assistance in developing and learning safe and  effective techniques for performing yo
                    
                    Resumen del contenido incluido en la página 4 
                    
                        Paramount XD is a manual, folding, lightweight wheelchair, suit- able for frequent users with a maximum weight capacity of 650 lb  (295 kg) who require a lightweight, portable wheelchair, fitted to  their anatomy, without the need of customization or alteration to the  center of gravity. The Paramount XD is intended for indoor and/or  outdoor use. The person performing adjustments on the Paramount XD has the  responsibility of making certain that the user can safely operate the  wheelchair with 
                    
                    Resumen del contenido incluido en la página 5 
                    
                        I 		 MPOR t Ant	 SAFety	PRecAutIOnS IMPORt Ant	SAFety	PRecAutIOnS: 	 Alw AyS	FOllOw	 tHeSe	 SAFety	PRecAutIOnS	 wHenu 	 SInG	 yOuR	 wHeelcHAIR. 	 FAIluRe	 tO	DO	SO	cOulD	ReSult	In	PeRSOnAl	InjuR y	 tO	 yOu	 OR	OtHeRS	OR	DAMAGe	 tO	 yOuR	 wHeelcHAIR. Safety requires the constant attention of the wheelchair user and  the attendant. It is extremely important to learn and always use safe  methods of performing basic daily activities. Always consult your  healthcare professional to determine those m
                    
                    Resumen del contenido incluido en la página 6 
                    
                        WARNING:  Do not attempt inclines without anti-tippers  installed. Do not attempt any incline or decline  greater than six degrees (10% grade, or one foot  of rise or fall per ten feet of ramp length). WARNING:  This wheelchair does not offer seating or occu- pant restraint equivalent to the seat provided in  a motor vehicle! To increase your safety while  traveling in a motor vehicle, always transfer to  the vehicle seat and use the restraint provided  by the vehicle manufacturer. WARNING:  Do 
                    
                    Resumen del contenido incluido en la página 7 
                    
                        WARNING:  To reduce the risk of tipping before leaning or  reaching forward, sit back in the seat and rotate  casters fully toward front of wheelchair. WARNING:  Unauthorized modification or the use of non- Everest & Jennings replacement parts could  change the structure of the wheelchair, void  the warranty, and create a hazardous condition  resulting in serious personal injury. WARNING:  Do not lean on this wheelchair or use it as a  walker—these are practices which could result  in loss of ba
                    
                    Resumen del contenido incluido en la página 8 
                    
                        3		 GettInG	St ARteD Please familiarize yourself with main components, identified in Para- mount XD illustration below. back upholstery push handle/ back post armpad arm seat rear wheel upholstery footrest frame anti-tip cross brace cover caster housing wheel lock caster fork caster wheel 8	 GF0700137RevA07,	September	007	•	Paramount	XD	Owner’s	Manual	                                                                                                                                                 
                    
                    Resumen del contenido incluido en la página 9 
                    
                        4	 HAnDlInG	 tIPS The Everest & Jennings Paramount XD has been designed and  engineered to perform as a stable and well balanced unit when used  for its intended purpose. However, it is possible to tip the Paramount  XD over if it is used improperly. We urge you to learn the characteris- tics of your wheelchair. It is most important to learn safe methods to  perform the daily activities basic to your lifestyle. Consult your medi- cal professionals for assistance in developing the skills and prop
                    
                    Resumen del contenido incluido en la página 10 
                    
                        ReAcHInG	/	benDInG WARNING:  Always turn the casters frontward to provide sta- bility while reaching. If in doubt, ask for assis- tance or use a device that will extend your reach  without requiring you to shift your weight. Although it is not recommended, you may find it occasionally neces- sary to lean or reach from your wheelchair. Consult with your health- care professional for assistance in developing your personal safe  reaching or moving techniques suited to your ability and restrictions.
                    
                    Resumen del contenido incluido en la página 11 
                    
                        1. Maneuver the wheelchair as close as possible to the object; the  rear wheels will limit how close you can get. 2. Rotate both casters fully forward: Go forward, and then back the  wheelchair toward the object to swing the casters fully forward. 3. Reach only as far as your arm will extend without changing  your sitting position. If in doubt, reposition the wheelchair or  ask for assistance. RAMPS	 AnD	InclIneS WARNING:  During descent, the footplates' lowest point  1 should be no closer to th
                    
                    Resumen del contenido incluido en la página 12 
                    
                        Ascent Lean the upper part of your body slightly forward as you ascend the  incline. If it becomes necessary to stop on the incline, avoid any  abrupt or sudden forward movement as you resume climbing, this  could cause tipping. Descent Always face forward when going down a ramp, but do not lean  forward; this could cause tipping. Lean slightly backward to increase  stability. It is critical to keep the wheelchair under control at all  times. Descent should be made slowly and safely by grasping 
                    
                    Resumen del contenido incluido en la página 13 
                    
                        5		 ADjuStMentS The Paramount XD offers several adjustments to make it easier and  more comfortable to drive. Section 7, MAINTENANCE, offers preven- tive maintenance suggestions for keeping your wheelchair in excel- lent condition; ensure that all components are in excellent condition  before adjusting. The following are recommended methods; after  a few adjustments, you may develop your own. Always consult your  Graham-Field Health Products dealer for assistance. The person performing adjustmen
                    
                    Resumen del contenido incluido en la página 14 
                    
                        ARMS All Paramount XD arms are removable. Removearm 	 1. Depress lower arm  release until it unlocks. 2. Hold arm by center of  armpad. Lift straight up  arm and off. Attach	arm release 1. Hold arm by center of  armpad. 2. Lower arm straight down  into sockets and push to  Remove / attach arm lock. 3. Ensure that release is locked in place. WARNING:  Ensure that arms are locked into place before  occupying or operating wheelchair. 14	 GF0700137RevA07,September 	 	007	•	Paramount	XD	Owner’s	Manu
                    
                    Resumen del contenido incluido en la página 15 
                    
                        FROntR 	 IGGInG FOOtReSt—Det AcHAble, 	SwInGA wAy WARNING:  The footplates' lowest point should be no closer  1 to the ground than 2 /2 inches, to permit proper  clearance. WARNING:  Do not stand on the footplates; this could cause  the wheelchair to tip. Remove	footrest swingaway release lever 1. To release lock, pull  lower hinge pin swingaway release  lever forward, toward  footrest front of wheelchair.  Footrest will swing  outward. 2. To remove, lift footrest  straight up off wheel- chair h
                    
                    Resumen del contenido incluido en la página 16 
                    
                        Adjust	footplate	extensionlength 	 1. Remove adjustment  footrest knob; this will free  hanger footplate extension  adjustment tube to slide inside  knob footrest hanger tube. 2. Reposition footplate  footplate extension in desired  extension position. 3. Reinstall adjustment adjustment footplate holes knob in appropriate  Adjust footplate extension length adjustment hole for  desired footplate exten- sion length. Screw  knob in to tighten. 4. Follow steps 1-3 to adjust other footplate extension
                    
                    Resumen del contenido incluido en la página 17 
                    
                        elev AtInG	leGReSt—Det AcHAble, 	SwInGA wAy WARNING:  The footplates' lowest point should be no closer  1 to the ground than 2 /2 inches, to permit proper  clearance. WARNING:  Do not stand on the footplates; this could cause  the wheelchair to tip. Remove	elevatinglegrest 	 1. To release lock, pull  swingaway release lever swingaway release lever  forward, toward front of  elevating wheelchair. Legrest will  legrest swing outward. 2. To remove, lift legrest  straight up off wheel- chair hinge p
                    
                    Resumen del contenido incluido en la página 18 
                    
                        Adjustlegrest 	 	elevation Note:	 It	ispossible 	 	to	RAISE	elevating	legrestwithout 	 unlock 	 - ing	legrestrelease. 	 As 	 	a	safetyfeature, 	 however 	 ,	you	 mustunlock 	 legrest 	 release 	 	in	orderto 	 	LOWERelevat 	 - inglegrest. 	 1. To release elevation lock,  pull legrest release lever legrest release lever up toward back of wheel- elevating legrest chair. 2. Swing legrest up to  desired position. 3. Lock legrest elevation  level: Pull lever toward  front of wheelchair. 4. Ensure that
                    
                    Resumen del contenido incluido en la página 19 
                    
                        Adjust	elevatinglegrest 	 panel 	 position 	 The legrest panel has three  mounting positions one inch  apart on legrest tube. Refer  legrest tube stop to picture at right. To adjust: elevating 1. Rotate legrest panel / legrest hinge plate assembly  legrest panel / on legrest tube so that  hinge plate assembly legrest tube stop is in  center of hinge plate  slot. Adjust legrest panel position 2. Slide legrest panel /  hinge plate assembly up  or down on legrest tube  to desired position. 3. Rotat
                    
                    Resumen del contenido incluido en la página 20 
                    
                        wHeell	 OckS Adjust	wheellocks 	 One3/8" 	 	wrench 1. Use a 7/16" wrench to  loosen the two clamp  clamp bolts until the lock  clamp slides on the frame. bolt 2. Place the wheel lock  in the locked position  and slide it into contact  with the tire. wheel lock 3. Place the wheel lock in  tire the unlocked position  Adjust wheel lock and slide it 3/8" closer  to the tire. 4. Use a 3/8" wrench to tighten the two clamp bolts and  engage the lock to check the fit. The lock should indent the  tire at