Resumen del contenido incluido en la página 1
ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODEL
19EN33S 22EN33S
19EN33SW 23EN33S
20EN33SS 24EN33S
20EN33S
www.lg.com
Resumen del contenido incluido en la página 2
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Resumen del contenido incluido en la página 3
ENGLISH ENG TABLE OF CONTENTS 2 CONTENTS 3 ASSEMBLING AND PREPAR- ING 24 SPECIFICATIONS 3 Unpacking 24 19EN33S 4 Parts and buttons 25 19EN33SW 5 Setting up the Monitor set 26 20EN33SS 5 - Attaching the Stand Base 27 20EN33S 5 - Detaching the Stand Base 28 22EN33S 6 - Mounting on a table 29 23EN33S 6 - Using the cable holder 30 24EN33S 8 - Mounting on a wall 31 Preset Modes (Resolution) 32 Indicator 9 USING THE MONITOR SET 33 PROPER POSTURE 9 Connecting to a PC 9 - D-SUB connection 33 Proper post
Resumen del contenido incluido en la página 4
ENGLISH ENG ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / D-SUB Cable Card or Power Cord AC-DC Adapter AC-DC Adapter ( Depending on the country ) ( Depending on the country ) Stand Body Stand Base CAUTION y Do not use any unappro
Resumen del contenido incluido en la página 5
ENGLISH ENG ASSEMBLING AND PREPARING 4 Parts and buttons Power Indicator Lighting On: Turned on y Lighting Off: Turned off y (Power Button) Button (See p.11) Connection panel (See p.9)
Resumen del contenido incluido en la página 6
ENGLISH ENG ASSEMBLING AND PREPARING 5 Detaching the Stand Base Setting up the Monitor set Place the Monitor set with the screen side 1 Attaching the Stand Base down on a flat and cushioned surface. Place the Monitor set with the screen side 1 down on a flat and cushioned surface. 2 1 Pull out the Stand Body and Stand Base from the monitor set. CAUTION 2 Turn the screw to the left with a coin. Lay a foam mat or soft protective cloth Pull out the Stand Base. 3 on the surface to protect th
Resumen del contenido incluido en la página 7
ENGLISH ENG ASSEMBLING AND PREPARING 6 Mounting on a table Press (Power) button on the bottom switch 3 panel to turn the power on. Lift and tilt the Monitor set into its upright 1 position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric 10 cm shock may occur. 10 cm 10 cm 10 cm Using the cable holder Connect the AC-DC Adapter and Power Cord 2 to a wall outlet. Ca
Resumen del contenido incluido en la página 8
ENGLISH ENG ASSEMBLING AND PREPARING 7 WARNING Using the Kensington security system The Kensington security system connector is When you adjust the angle, do not hold the located at the back of the Monitor set. For more bottom of the Monitor set frame as shown on the following illustration, as may injure your information of installation and using, refer to the fingers. manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security s
Resumen del contenido incluido en la página 9
ENGLISH ENG ASSEMBLING AND PREPARING 8 Model Mounting on a wall 19EN33S 20EN33S 19EN33SW 22EN33S For proper ventilation, allow a clearance of 10 cm 20EN33SS 23EN33S on each side and from the wall. Detailed VESA (A x B) 75 x 75 instructions are available from your dealer, see the Standard screw M4 optional Tilt Wall Mounting Bracket Installation and Number of screws 4 Setup Guide. Model 24EN33S VESA (A x B) 100 x 100 10 cm Standard screw M4 Number of screws 4 10 cm 10 cm 10 cm CAUTION Discon
Resumen del contenido incluido en la página 10
ENGLISH ENG USING THE MONITOR SET 9 USING THE MONITOR SET NOTE Connecting to a PC y When using a D-Sub signal input cable y Your Monitor set supports Plug & Play*. connector for Macintosh *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the y Mac adapter Monitor set. Connect the PC and the Monitor set For Apple Macintosh use, a separate plug
Resumen del contenido incluido en la página 11
ENGLISH ENG USING THE MONITOR SET 10 Self Image Setting Function CAUTION Press the power button on the bottom panel to turn the power on. When monitor power is turned y Connect the signal input cable on, the "Self Image Setting" Function is executed and tighten it by turning the automatically. (Only supported in Analog Mode) screws clockwise. y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. y Avoid displaying a fixed ima
Resumen del contenido incluido en la página 12
ENGLISH ENG CUSTOMIZING SETTINGS 11 CUSTOMIZING SETTINGS Press the desired button on the bottom of the Monitor set. 1 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. 3 EXIT MENU MY KEY FUNC. AUTO INPUT Monitor set Buttons Button Description Accesses the main menus.(See p.12) OSD Locked/OSD This function allows you to lock the current
Resumen del contenido incluido en la página 13
ENGLISH ENG CUSTOMIZING SETTINGS 12 Customizing Settings Menu Settings Press MENU button on the bottom of the Monitor set 1 to display the Menu OSD. Set the options by pressing the ◄ or ► or ▼ 2 buttons. 3 Select the "Next Menu" button to enter the more option settings. Select EXIT to leave the OSD menu. 4 To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu Description Brightness To adjust the brightness, contrast of th
Resumen del contenido incluido en la página 14
ENGLISH ENG CUSTOMIZING SETTINGS 13 Picture Press MENU button on the bottom of the Monitor set 1 to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. Enter to Picture by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► or ▼ 4 buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next Menu > Picture Description Sharpness
Resumen del contenido incluido en la página 15
ENGLISH ENG CUSTOMIZING SETTINGS 14 Color Press MENU button on the bottom of the Monitor set 1 to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. Select Color by pressing the ► button. 3 Enter to Color by pressing the ▼ button. 4 5 Set the options by pressing the ◄ or ► or ▼ buttons. Select EXIT to leave the OSD menu. 6 To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next
Resumen del contenido incluido en la página 16
ENGLISH ENG CUSTOMIZING SETTINGS 15 Display Press MENU button on the bottom of the Monitor set 1 to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. Select Display by pressing the ► button. 3 Enter to Display by pressing the ▼ button. 4 5 Set the options by pressing the ◄ or ► or ▼ buttons. Select EXIT to leave the OSD menu. 6 To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu
Resumen del contenido incluido en la página 17
ENGLISH ENG CUSTOMIZING SETTINGS 16 Others 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. Select the "Next Menu" button to enter the more 2 option settings. Select Others by pressing the ► button. 3 4 Enter to Others by pressing the ▼ button. Set the options by pressing the ◄ or ► or ▼ 5 buttons. Select EXIT to leave the OSD menu. 6 To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > N
Resumen del contenido incluido en la página 18
ENGLISH ENG CUSTOMIZING SETTINGS 17 MY KEY Setting Press MY KEY button on the bottom of the Monitor 1 set to display the MY KEY OSD. Set the options by pressing the ◄or►or▼buttons. 2 3 Select EXIT to leave the OSD menu. Each option is explained below. MY KEY Description MY KEY Setting MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature. Back Select Back to return MY KEY menu.
Resumen del contenido incluido en la página 19
ENGLISH ENG CUSTOMIZING SETTINGS 18 FUNC. Setting Picture Mode FUNC. 1 Press button on the bottom of the Monitor set FUNC. to display the OSD. Enter to Picture Mode by pressing the ▼ button. 2 Set the options by pressing the ◄ or ► buttons. 3 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow( )button. Each option is explained below. Picture Mode Description Custom It is a mode that the user can adjust each element. It can a
Resumen del contenido incluido en la página 20
ENGLISH ENG CUSTOMIZING SETTINGS 19 SUPER ENERGY SAVING Press FUNC. button on the bottom of the Monitor set to 1 display the FUNC. OSD. 2 Select SUPER ENERGY SAVING by pressing the ► button. Enter to SUPER ENERGY SAVING by pressing the ▼ 3 button. Set the options by pressing the ◄ or ► or ▼buttons. 4 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. SUPER ENERGY SAVING Description On
