Manual de instrucciones de Dell C800

Resumen del contenido incluido en la página 1

Dell Latitude C800 Service Manual
Dell™ Latitude™ C800 Service Manual
Before You Begin
Preparing to Work Inside the Computer
Recommended Tools
Screw Identification
Removing and Replacing Parts
System Components
Hard Drive
Fixed Optical Drive
Memory Module
Mini PCI Card Assembly
Keyboard Assembly
Display and Bezel Assemblies
Microprocessor Thermal Cooling Assembly
Microprocessor Module
Video Graphics Board
Palmrest Assembly
Reserve Battery
System Board Assembly
Battery and Modul

Resumen del contenido incluido en la página 2

Before You Begin : Dell Latitude C800 Service Manual Back to Contents Page Before You Begin Dell™ Latitude™ C800 Service Manual Preparing to Work Inside the Computer Recommended Tools Screw Identification Preparing to Work Inside the Computer NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: To avoid damaging the computer, perform the following steps

Resumen del contenido incluido en la página 3

Before You Begin : Dell Latitude C800 Service Manual 8. Remove any installed PC Cards or plastic blanks from the PC Card slot. 9. Close the display and turn the computer upside down on a flat work surface. 10. Remove the battery from the battery bay. NOTICE: To avoid component damage, always remove any installed batteries before you service the computer. 11. Remove any device installed in the modular bay. 12. To dissipate static electricity while you work, periodically touch an unpai

Resumen del contenido incluido en la página 4

Before You Begin : Dell Latitude C800 Service Manual Screw Identification When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the component screws.The placemat provides the number of screws and the sizes. Screw Identification file:///F|/Service%20Manuals/Dell/Latitude/c800/ch1.htm (3 of 6) [2/28/2004 8:00:10 AM]