Résumé du contenu de la page N° 1
User’s Guide
User’s Guide
www.concord-camera.com
6 6340z UG-ENU (516084-00).indd 1 340z UG-ENU (516084-00).indd 1 1 10/20/04 5:32:53 PM 0/20/04 5:32:53 PM
Résumé du contenu de la page N° 2
ENGLISH TABLE OF CONTENTS GETTING STARTED Package Contents ..........................................................................................................................................3 System Requirements ....................................................................................................................................4 Safety Information ............................................................................................................................
Résumé du contenu de la page N° 3
Taking Pictures in A/S/M (Advanced) Mode .................................................................................................19 Taking Pictures in A (Aperture Priority) Mode .........................................................................................19 Taking Pictures in S (Shutter Priority) Mode ..........................................................................................19 Taking Pictures in M (Manual) Mode ........................................
Résumé du contenu de la page N° 4
GETTING STARTED PACKAGE CONTENTS Please contact your dealer immediately if any of the items below are missing or damaged. Camera Li-ion Rechargeable Battery Pack Case Compact Power Adapter Software Installation CD-ROM x 2 USB Cable (including multilingual User’s Guide) Quick Start Guide Wrist Strap TV out cable 3 6 6340z UG-ENU (516084-00).indd 3 340z UG-ENU (516084-00).indd 3 1 10/20/04 5:32:54 PM 0/20/04 5:32:54 PM
Résumé du contenu de la page N° 5
GETTING STARTED SYSTEM REQUIREMENTS Windows: • PC with processor better than MMX Pentium 300 MHz • Windows 98 SE (Second Edition)/2000/ME/XP • Minimum 128 MB RAM • USB port • CD-ROM drive • 1024 x 768 monitor, 24-bit color (true color) Macintosh: • Power Mac G3 or later • Mac OS 9.0, 9.1, 9.2 and OS X • Minimum 64 MB RAM • USB port • CD-ROM drive • 640 x 480 monitor with thousands of color (millions of color recommended) Specifications are subject to change without prior notice. SAFETY INFORMAT
Résumé du contenu de la page N° 6
GETTING STARTED FCC COMPLIANCE AND ADVISORY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) This device may not cause harmful interference, and 2.) This device must accept any interference received, including interference that may cause unsatisfactory operation. This equipment has been tested and found to comply with the limits for a Class B peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas
Résumé du contenu de la page N° 7
GETTING STARTED CAMERA COMPONENTS Front /Charge LED Tripod Socket Status LED (green) Back W (Zoom Out) button T (Zoom in) button Flash Ready LED (orange) Top Speaker Microphone 6 6340z UG-ENU (516084-00).indd 6 6340z UG-ENU (516084-00).indd 6 1 10/20/04 5:32:55 PM 0/20/04 5:32:55 PM
Résumé du contenu de la page N° 8
GETTING STARTED Side USB port Wrist Strap Holder Battery/Memory Card Door ATTACHING THE WRIST STRAP Attach the wrist strap as illustrated below: 1 2 3 Note: Don’t swing the camera when carrying it by the wrist strap. USING THE CASE Store the camera in the case when it is not in use. 7 6340z UG-ENU (516084-00).indd 7 6340z UG-ENU (516084-00).indd 7 1 10/20/04 5:32:55 PM 0/20/04 5:32:55 PM
Résumé du contenu de la page N° 9
PREPARING THE CAMERA INSTALLING THE BATTERY PACK The camera can use either the supplied 3.7V 900 mA Rechargeable Battery Pack or the Compact Power Adapter as power source. Charge the Battery Pack before you use it. 1. Slide the Battery/Memory Card Door in the direction of the buttons. 2. Insert the battery pack in the direction of the button marked on the battery pack. 3. Close the Battery/Memory Card Door. CHARGING THE BATTERY PACK 1. Put the battery pack inside the camera body. 2. Conne
Résumé du contenu de la page N° 10
PREPARING THE CAMERA Battery Status Symbols The following icons indicate the various battery status. These icons will not appear when the camera is powered with a compact power adapter. Sufficient battery Low battery Battery is over. Recharge the battery. Note: When the battery is running out, the message “Replace Battery” will be displayed on the LCD. USING COMPACT POWER ADAPTER Connect the DC plug of the power adapter to the camera’s DC-IN in terminal. Plug the other end of the adapter int
Résumé du contenu de la page N° 11
PREPARING THE CAMERA ABOUT CAMERA MEMORY AND STORAGE Internal Memory The digital camera is equipped with a 16 MB internal memory. If no SD card is inserted in the camera, all pictures/video clips recorded by the camera will be stored in the internal memory. SD Memory Card When SD card is inserted in the camera, all pictures and video clips recorded by the camera will be stored on the SD card by using the Design Rule for Camera File System (DCF) protocol. The DCF protocol is designed to accom
Résumé du contenu de la page N° 12
PREPARING THE CAMERA Power Off The camera will be powered off automatically after being idled for sometime. The auto power off setting can be changed. (p. 12) One minute before the camera is auto off, the LCD will be turned off. When the LCD is automatically power off, the green status LED remains light. In this situation, you may press any button to turn the camera back on. To turn off the camera manually, slide the Power Switch to the right side. SETTING THE DATE AND TIME 1. Turn on the ca
Résumé du contenu de la page N° 13
PREPARING THE CAMERA SETTING AUTO POWER OFF 1. Press the MENU button. 2. Press the button to select the Setup Menu. 3. Press the or button to select Power Save. 4. Press the or button to set auto power off values: off, 1 min ~10 min. 5. Press the MENU button to close the menu window. SETTING TV OUTPUT STANDARD 1. Press the MENU button. 2. Press the button to select the Setup Menu. 3. Press the or button to select TV Output. 4. Press the or to set the video out
Résumé du contenu de la page N° 14
PREPARING THE CAMERA ABOUT MENUS AND SETTINGS This chart shows the options for each menu settings. Mode Menu Item Available Setting Ref. Page Auto Camera Resolution P.16 Mode Quality P.16 Drive Mode P.18 File No. Reset On / Off P.27 Quick View 10 sec / 2 sec / Off P.16 Digital Zoom On / Off P.15 A/S/M Mode A / S / M P.19 Camera Mode Resolution P.16 Quality P.16 Drive Mode P.18 EV +2/+1.7/+1.3/+1.0/+0.7/+0.3/ P.20 0.0/-0.3/-0.7/-1.0/-1.3/-1.7/-2.0 White Balance P.21 ISO P.21 File No. Reset On / O
Résumé du contenu de la page N° 15
PREPARING THE CAMERA BASIC FUNCTIONS TURNING THE LCD ON OR OFF Press the button repeatedly to change the LCD display mode. Shooting Mode LCD On (with Information) LCD On (no Information) LCD Off Playback Mode LCD On LCD On (without exposure data) LCD On (no Information) About the Information Displayed on the LCD Monitor The LCD monitor displays various information in Shooting and Playback mode. Shooting Mode Playback Mode
Résumé du contenu de la page N° 16
PREPARING THE CAMERA USING THE ZOOM The camera has a 3x optical zoom lens with an effective zoom range 7.7 mm to 23.1 mm (equivalent to 37 mm to 111 mm in 35 mm film format) as well as 4x digital zoom capability. 1. Press T (Tele) to zoom in to your subject. • While the optical zoom is activated, mechanical sound come from the lens movements can be heard. You can also see the lens retracts. • While the digital zoom is activated, the zoom scale indicator (4.5x, 6.0x, 7.5x, 9.0x, 10.5x, 12x)
Résumé du contenu de la page N° 17
TAKING PICTURES/VIDEO CLIPS TAKING PICTURES IN AUTO MODE In this mode, all you have to do is pressing the Shutter button. The camera will set aperture and shutter speed etc. automatically. 1. Turn the Mode dial to A mode. 2. Frame the subject in the LCD. • For best result, stand at least 0.8 m (2.62 ft.) away from the subject in normal mode. 3. Press T or W button to zoom in or out the subject. 4. Press the Shutter button down halfway and hold there for a few seconds. • When the camera has
Résumé du contenu de la page N° 18
TAKING PICTURES/VIDEO CLIPS Resolution Purpose 2848 x 2136 Print large prints (Large) 2048 x 1536 Print on small size paper (Medium 1) 1408 x 1056 Send images by e-mail (Medium 2) 640 x 480 Shoot more images (Small) Quality Purpose Fine Shoot normal quality images Normal Shoot more images USING THE FLASH Use the flash according to the guidelines below: Auto The flash fires automatically according to the lighting condition. Force On The flash always fires. Force Off The flash does not fir
Résumé du contenu de la page N° 19
TAKING PICTURES/VIDEO CLIPS TAKING PICTURES IN MACRO MODE Use the Macro mode to shoot close-up of subjects in the range as listed below: Mode Focus Range W Mode 5 cm – 80 cm (0.16 ft. – 2.62 ft.) T Mode 30 cm – 80 cm (0.98 ft. –2.62 ft.) 1. Press the button to turn the LCD monitor on (if necessary). 2. Press the button. • The icon appears on the LCD monitor. 3. After Macro mode is selected, the Flash will be set at Off mode. Press button to change flash mode. 4. Shoot the image. Note: 1.
Résumé du contenu de la page N° 20
TAKING PICTURES/VIDEO CLIPS TAKING PICTURES IN A/S/M (ADVANCED) MODE TAKING PICTURES IN A (APERTURE PRIORITY) MODE When the camera is set in the aperture-priority mode, it selects a shutter speed to match the brightness automatically. The larger the number for the aperture value, the smaller the aperture opens, and consequently the less the amount of light enters. A larger aperture setting produces a lighter image, while a lower aperture value produces a darker image. 1. Turn the mode dial
