Résumé du contenu de la page N° 1 
                    
                         
9
2011
NISSAN TOWING GUIDE
The 2011 NISSAN Towing Guide provides information for currently available 2011 
NISSAN vehicles. This publication will be amended as new vehicles are introduced. 
 
 Table of Contents
Introduction _____________________________________________________1 
Towing Equipment ______________________________________________2 
What Is Right for You ___________________________________________3 
Preparing Your Vehicle _________________________________________10 
Towing Safety __
                    
                    Résumé du contenu de la page N° 2 
                    
                        INTRODUCTION    SAFETY IS PRIORITY ONE  Obviously, your first concern should be safety. Your vehicle was designed to be used primarily  to carry passengers and cargo. Always remember that towing a trailer places additional loads  on your vehicle’s engine, drivetrain, suspension, steering, braking, and other systems.  Therefore, be certain that your vehicle can meet the demands of the towing application you  have in mind.   Rent or purchase only the highest-quality towing and safety equipment you
                    
                    Résumé du contenu de la page N° 3 
                    
                        It is also a good idea to discuss your towing requirements with either your NISSAN dealer or a  professional supplier of towing equipment before you equip your NISSAN vehicle for towing.  Finally, there are state and local laws on towing that you should review to ensure compliance  with all regulations.      TOWING   EQUIPMENT     RENTING  The first thing to keep in mind when renting a trailer is to rent only from professional  companies that specialize in towing and towing equipment. More than 
                    
                    Résumé du contenu de la page N° 4 
                    
                        PURCHASING  If you are buying a travel or boat trailer, be sure that your NISSAN vehicle has the towing  capacity to pull it. Refer to your vehicle owner’s manual for detailed information regarding the  towing capacity of your specific vehicle. Your vehicle owner’s manual should ALWAYS be  referenced before making any towing decisions.    Naturally, you will want to buy the highest-quality equipment you can find for maximum  towing safety. And if you plan to tow often, consider convenience. Quic
                    
                    Résumé du contenu de la page N° 5 
                    
                         Installing an aftermarket hitch may affect the rear crash performance of your vehicle.   Be sure that the hitch does not interfere in any way with the vehicle’s impact-absorbing  bumper.    Regularly check to see that all hitch-mounting bolts are securely fastened.    For receiver-type hitches using a ball mount, the ball mount should be removed when not  towing.   If you install a hitch yourself, remember that it must be securely attached to the frame or  underbody, according to the manufactur
                    
                    Résumé du contenu de la page N° 6 
                    
                        Weight-Distributing Hitch System – This   type of system uses a “load-leveling” or  “equalizing” hitch. The weight-distributing  feature helps shift trailer tongue weight to  all trailer tires and the tow vehicle front tires.   For Armada, Frontier, Pathfinder and  Titan vehicles, a weight-distributing hitch  ball mount (Class IV) is recommended if you     plan to tow trailers with a maximum weight  5 over 5,000 lbs. This ball mount includes a 2 /16” hitch ball rated for up to 10,000 lbs., and i
                    
                    Résumé du contenu de la page N° 7 
                    
                        5th Wheel or Gooseneck Hitch –  5th Wheel Hitch Mounted in the bed of a pick-up and  designed for heavy-duty applications,  these types of hitches are not available  from NISSAN but can be purchased from  a professional supplier of towing  equipment.*   A 5th wheel or gooseneck hitch is     usually installed and adjusted to meet the  requirements of a particular trailer, but two  basic rules hold true in every case. First, Gooseneck Hitch the hitch should be mounted a minimum   2 inches forward 
                    
                    Résumé du contenu de la page N° 8 
                    
                        Like ball mounts, hitch balls are available in a number of weight capacities and sizes. Always  make sure the hitch ball selected has the proper shank diameter and weight rating for the ball  7 mount as well as the coupler on your trailer. Using a 1 /8” hitch ball in a 2” coupler, for example,  could result in the trailer separating from the tow vehicle.    The diameter of the hitch ball shank must be matched to the ball mount hole diameter. The  1 shank should be no more than /16” smaller than 
                    
                    Résumé du contenu de la page N° 9 
                    
                        will allow the chains/cables to drag on the ground.   Do not use S-hooks for attaching, as they may become un-hooked and are illegal in many  states. To avoid damage to the bumper and chains/cables when making a sharp turn, do not  attach the chains/cables too close to the coupler. Consult your trailer manufacturer for the  proper location of the chain/cable attachment to the trailer.    REAR VIEW MIRRORS  In many cases, a trailer can block your rear vision when you are using only the standard  
                    
                    Résumé du contenu de la page N° 10 
                    
                        converter” must be used, as a converter of this type creates only minimal additional electrical  demand (draw) on the vehicle lighting circuits, which helps to ensure protection for the  vehicle’s sensitive electronics.  Always check for correct operation of the taillights, stoplights, and turn signal lights every  time you connect a trailer for towing. Never replace vehicle fuses with fuses of a higher  amperage rating than the original.  NOTE – Improper or poor quality trailer harness wiring m
                    
                    Résumé du contenu de la page N° 11 
                    
                        NOTE – Improper or poor quality trailer harness wiring may affect your vehicle’s electrical  system. Use only a NISSAN approved wiring harness, or consult your dealer or a professional  supplier of towing equipment for compatible equipment.     SWAY CONTROL DEVICE  Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect trailer  handling. Sway control devices may be used to help control these effects. If you choose to  use one, contact a reputable trailer hitch supplier t
                    
                    Résumé du contenu de la page N° 12 
                    
                        MEASURING VEHICLE WEIGHT  The key to safe, efficient towing has to do with weight. Your vehicle — SUV, crossover, truck  or passenger car — is capable of carrying and towing only a certain amount of weight. You  must compare your vehicle’s tow weight ratings with the combined weight of the vehicle,  trailer, and their contents. This will help ensure that the total weight does not exceed any of  your vehicle’s tow weight ratings.     There are four weights to consider when towing:    Gross Vehicl
                    
                    Résumé du contenu de la page N° 13 
                    
                        F.M.V.S.S.   Certification Label  On all NISSAN vehicles, the GVWR is shown on the       MFD BY NISSAN MOTOR CO., LTD Federal Motor Vehicle Safety Standard (F.M.V.S.S.)  DATE GVWR certification label located in the driver’s-side door area.   GAWR FR. TIRES WITH RIMS AT          PSI  To avoid overloading the vehicle, be sure   COLD SINGLE   GAWR RR. to include the trailer tongue/king pin load as a  WITH TIRES RIMS AT          PSI COLD SINGLE part of the cargo when determining how much weight   TH
                    
                    Résumé du contenu de la page N° 14 
                    
                                              GROSS COMBINED WEIGHT (GCW)  The Gross Combined Weight (GCW) is the total weight of the tow vehicle with all  passengers, cargo, and fuel, plus the total weight of the trailer and all its cargo.   To determine the GCW, simply weigh your vehicle when fully loaded and ready to tow, and  add in the weight of the loaded trailer.   The GCW you come up with must not exceed the Gross Combined Weight Rating   (GCWR) for your vehicle. Refer to your vehicle owner’s manual to view the
                    
                    Résumé du contenu de la page N° 15 
                    
                        For example, to determine the proper trailer tongue load for a 1,500-lb. trailer, multiply the  weight of 1,500 lbs. by 10% to arrive at a figure of 150 lbs. 5th wheel and gooseneck trailer  king pin load must be kept between 15-25% of the actual trailer weight, within the limits of  the king pin load allowable.   Some trailer types may require different trailer tongue loads for safe towing. Always follow  the trailer manufacturer’s recommendations for proper trailer set-up and trailer tongue lo
                    
                    Résumé du contenu de la page N° 16 
                    
                        TOWING   SAFETY    Towing can significantly alter the handling and performance characteristics of your vehicle.  Plus, it puts increased strain on the engine and drivetrain. Therefore, it is always a good idea  to approach towing from the standpoint of safety — whether you are purchasing equipment or  actually pulling the trailer.   Always make sure your vehicle’s towing capacity is adequate for the trailer you intend to  tow. Buy or lease only quality equipment. In addition, be certain that you
                    
                    Résumé du contenu de la page N° 17 
                    
                        The trailer load should be balanced equally from  side-to-side. Unequal side-to-side loading can  negatively affect handling and braking. Once in  place, all cargo should be firmly secured to  prevent shifting. If the load should shift abruptly  during braking or cornering, it could quickly affect  the handling of your vehicle and cause a very  unsafe situation.    Finally, do not carry flammable materials, such  as gasoline, in your trailer. In the event of an accident, an explosion or fire cou
                    
                    Résumé du contenu de la page N° 18 
                    
                        VEHICLE MODIFICATIONS  Vehicle modifications — beyond those required for proper hitch installation, wiring hook-up, or   adding extended mirrors — are not recommended for any NISSAN vehicle being used for  towing purposes. Changes to the drivetrain, suspension, exhaust systems, frame  structure/unibody, or other vehicle components are not necessary for towing within the limits  described in this guide. These changes may diminish the reliability and longevity of your  vehicle and possibly void wa
                    
                    Résumé du contenu de la page N° 19 
                    
                        If possible, before you actually hit the open road, practice towing in a large uncrowded area  such as a stadium or shopping center parking lot. Become especially familiar with backing up  a trailer — the maneuver many people find most difficult.    BRAKE SOONER  The combination of your tow vehicle and trailer obviously requires a greater distance to stop.  A good rule of thumb to remember is that for each 10 mph of speed, allow yourself one tow  vehicle and trailer length of distance between th
                    
                    Résumé du contenu de la page N° 20 
                    
                        the trailer to the right, move the wheel to the right. All movements of the wheel should be done  in small increments. Of course, backing up should be done only at very slow speeds. For large  trailers that obstruct your rearward vision, have someone outside the vehicle act as a “spotter”  to guide you along.    PARK SMART  A tow vehicle and trailer can be an unwieldy combination in a small area, so always try to park  where you will have a relatively easy time maneuvering. Once parked, always b