Résumé du contenu de la page N° 1
Internal Use Only
North/Latin America http://aic.lgservice.com
Europe/Africa http://eic.lgservice.com
Asia/Oceania http://biz.lgservice.com
LED TV
SERVICE MANUAL
CHASSIS : LD3AC
MODEL: 39LP360H 39LN548C/549C
39LP360H-ZA 39LN548C/549C-ZA
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
P/NO : MFL67800109 (1302-REV00) Printed in Korea
Résumé du contenu de la page N° 2
CONTENTS CONTENTS .............................................................................................. 2 SAFETY PRECAUTIONS ........................................................................ 3 SERVICING PRECAUTIONS ................................................................... 4 SPECIFICATION ...................................................................................... 6 ADJUSTMENT INSTRUCTION ............................................................. 10 TRO
Résumé du contenu de la page N° 3
SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance Leakage Current Hot Check
Résumé du contenu de la page N° 4
SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service 2. After removing an electrical assembly equipped with ES manual and its supplements and addenda, read and follow the devices, place the assembly on a conductive surface such as SAFETY PRECAUTIONS on page 3 of this publication. aluminum foil, to prevent electrostatic charge buildup or expo- NOTE: If unforeseen circumstances create conflict between the sure of the assembly. following servicing precautions and any
Résumé du contenu de la page N° 5
IC Remove/Replacement 3. Solder the connections. Some chassis circuit boards have slotted holes (oblong) through CAUTION: Maintain original spacing between the replaced which the IC leads are inserted and then bent flat against the cir- component and adjacent components and the circuit board to cuit foil. When holes are the slotted type, the following technique prevent excessive component temperatures. should be used to remove and replace the IC. When working with boards using the familiar r
Résumé du contenu de la page N° 6
SPECIFICATION NOTE : Specifications and others are subject to change without notice for improvement. 1. Application range 3. Test method This specification is applied to the LED TV used LD3AC 1) Performance: LGE TV test method followed chassis. 2) Demanded other specification - Safety : CE, IEC specification - EMC : CE, IEC 2. Requirement for Test Each part is tested as below without special appointment. 1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C 2) Relative Humidity: 65 %
Résumé du contenu de la page N° 7
No. Item Specification Remarks ► DVB-T - Guard Interval(Bitrate_Mbit/s) 1/4, 1/8, 1/16, 1/32 - Modulation : Code Rate QPSK : 1/2, 2/3, 3/4, 5/6, 7/8 16-QAM : 1/2, 2/3, 3/4, 5/6, 7/8 64-QAM : 1/2, 2/3, 3/4, 5/6, 7/8 ► DVB-T2 Analog : Upper Heterodyne - Guard Interval(Bitrate_Mbit/s) 4 Receiving system Digital : COFDM, QAM 1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256 - Modulation : Code Rate QPSK : 1/2, 2/5, 2/3, 3/4, 5/6 16-QAM : 1/2, 2/5, 2/3, 3/4, 5/6 64-QAM : 1/2, 2
Résumé du contenu de la page N° 8
5. Video resolutions (2D) 5.1. Component Input (Y, CB/PB, CR/PR) No. Resolution H-freq(kHz) V-freq(Hz) Pixel clock(MHz) Proposed 1 720*576 15.625 50.00 13.5 SDTV ,DVD 576I 2 720*480 15.73 60.00 13.5135 SDTV ,DVD 480I 3 720*480 15.73 59.94 13.50 SDTV ,DVD 480I 4 720*576 31.25 50.00 27.00 SDTV 576P 5 720*480 31.50 60.00 27.027 SDTV 480P 6 720*480 31.47 59.94 27.00 SDTV 480P 7 1280*720 37.50 50.00 74.25 HDTV 720P 8 1280*720 45.00 60.00 74.25 HDTV 720P 9 1280*720 44.96 59.94 74.176 HDTV 720P 10 1920
Résumé du contenu de la page N° 9
5.3. HDMI Input(PC/DTV) No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark PC(DVI) DDC 1 640*350 31.468 70.09 25.17 EGA X 2 720*400 31.469 70.08 28.32 DOS O 3 640*480 31.469 59.94 25.17 VESA(VGA) O 4 800*600 37.879 60.31 40.00 VESA(SVGA) O 5 1024*768 48.363 60.00 65.00 VESA(XGA) O 6 1152*864 54.348 60.053 80.00 VESA O 7 1360*768 47.712 60.015 85.50 VESA (WXGA) O 8 1280*1024 63.981 60.020 108.0 VESA (SXGA) O 9 1920*1080 67.50 60.00 148.5 HDTV 1080P O DTV 1 720*480 31.47 59.94
Résumé du contenu de la page N° 10
ADJUSTMENT INSTRUCTION (4) Click "Connect" tab. If "Can't" is displayed, check connection 1. Application Range between computer, jig, and set. This specification sheet is applied to all of the LED TV with LD3AC chassis. (2) (3) 2. Designation (1) The adjustment is according to the order which is designated and which must be followed, according to the plan which can be changed only on agreeing. (2) Power adjustment : Free Voltage. (3) Magnetic Field Condition: Nil. (4) Input signal Un
Résumé du contenu de la page N° 11
* After downloading, have to adjust Tool Option again. 3.3. EDID data (1) Push "IN-START" key in service remote control. (1) HD RGB EDID data (2) Select "Tool Option 1" and push "OK" key. 0 1 2 3 4 5 6 7 8 9 A B C D E F (3) Punch in the number. (Each model has their number) 00 00 FF FF FF FF FF FF 00 1E 6D a b 10 c 01 03 68 A0 5A 78 0A EE 91 A3 54 4C 99 26 (4) Completed selecting Tool option. 20 0F 50 54 A1 08 00 71 40 61 40 45 40 31 40 01 01 30 01 01 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88 40
Résumé du contenu de la page N° 12
(5) Detail EDID Options are below 4. Total Assembly line process a. Product ID 4.1. White Balance adjustment MODEL NAME HEX EDID Table DDC Function ▪ W/B Equipment condition FHD/HD Model 0001 01 00 Analog/Digital CA210 : LED -> CH14, Test signal: Inner pattern(80IRE) ▪ Above 5 minutes H/run in the inner pattern. (“power on” key b. Serial No: Controlled on production line. of adjust remote control) c. Month, Year: Controlled on production line: ▪ If it is executed W/B adjustment in 2~3 minute
Résumé du contenu de la page N° 13
* Auto-control interface and directions 5. GND and HI-POT Test (1) Adjust in the place where the influx of light like floodlight 5.1. HI-POT auto-check preparation around is blocked. (illumination is less than 10 lux). - Check the POWER cable and SIGNAL cable insertion condition (2) Adhere closely the Color analyzer(CA210) to the module less than 10 cm distance, keep it with the surface of the Module and Color analyzer's prove vertically.(80° ~ 100°). 5.2. HI-POT auto-check (3) Aging time
Résumé du contenu de la page N° 14
6.3. Method & notice 7. CI+ key download (1) Serial number D/L is using of scan equipment. 7.1. Communication Prot connection (2) Setting of scan equipment operated by Manufacturing Technology Group. (3) Serial number D/L must be conformed when it is produced in production line, because serial number D/L is mandatory by D-book 4.0. * Manual Download(Model Name and Serial Number) If the TV set is downloaded by OTA or Service man, sometimes Connection : PCBA (USB Port) → USB to Serial Adapter
Résumé du contenu de la page N° 15
8. Check Commercial Features. 8.1. External speaker(8OHM, 1W, Single-End) ■ External speaker and Oscilloscope ■ Power only mode (1) Connect external speaker(8 ohm) to speaker out port with phone jack on TV side as below. (2) C heck the Max. speaker output is 1W or not. Sine wave with 1KHz will be displayed. 8.2. IR OUT < Equipment & Condition > ■ Simple Jig (commercial check JIG) ■ Power only mode (1) Connect each other RS232C port on the Commercial Check JIG. (2)
Résumé du contenu de la page N° 16
TROUBLE SHOOTING GUIDE 1. Check the booting Voltage
Résumé du contenu de la page N° 17
3. Analog TV Video 4. AV Video
Résumé du contenu de la page N° 18
5. RGB Video 6. HDMI Video
Résumé du contenu de la page N° 19
9. AV Audio 10. RGB Audio Copyright © LG Electronics. Inc. All rights reserved. LGE Internal Use Only - 20 - Only for training and service purposes
Résumé du contenu de la page N° 20
BLOCK DIAGRAM Copyright © LG Electronics. Inc. All rights reserved. LGE Internal Use Only - 21 - Only for training and service purposes LVDS Analog Module Tuner 74.25M DVB- T/C Digital FE_TS_Parallel CI DDR2 1Gb x 2 650M NAND RGB Flash 1Gb COMP NVRAM SCART USB S7LR2 (LGE211A-T8) PC/COMP L/R Side HDMI SPIDIF HDMI2 Headphone HDMI1 AMP Speaker MAX3232 EXT Sub Amp TVLink Speaker CI
