Résumé du contenu de la page N° 1 
                    
                        Operator's Manual
WHF5223 / 966947006
WHF6123 / 966947007
Please read the operator’s manual carefully and make sure 
you understand the instructions before using the machine.
English                                                                                                                                                                                                                                                                                                                              
                    
                    Résumé du contenu de la page N° 2 
                    
                        In order to implement improvements, specifications and designs   can be altered without prior notification. Note that no legal demands can be placed based on the information contained   in these instructions. Use only original parts for repairs.   The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit   without consent from the manufacturer.   Modifications to the unit may cause unsafe operations or damage the unit. ©2009 HTC. All rights reserved. 
                    
                    Résumé du contenu de la page N° 3 
                    
                        CoNTENTS INTRoDUCTIoN ............................................................... 5 mAINTENANCE .............................................................. 28 General ....................................................................... 5 maintenance Schedule ............................................. 28 Driving and Transport on Public Roads ...................... 5 Ignition System ......................................................... 30 operating ................................
                    
                    Résumé du contenu de la page N° 4 
                    
                        WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or  other persons. The owner must understand these instructions, and must allow only trained  persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under  the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit  chemicals 
                    
                    Résumé du contenu de la page N° 5 
                    
                        INTRoDUCTIoN Congratulations Operating Thank you for purchasing a Husqvarna Walk-Behind This machine is constructed only for mowing grass  mower. This machine is built for superior efficiency on lawns and even ground without obstacles such  to rapidly mow primarily large areas. A control panel as stones or tree stumps. The machine can also be  easily accessible to the operator and a transmission used for other tasks when equipped with special  regulated by steering controls both contribute to th
                    
                    Résumé du contenu de la page N° 6 
                    
                        INTRoDUCTIoN Good Service Husqvarna’s products are sold through out the world and only in specialized retail stores with complete service.  This ensures that you as a customer receive only the best support and service. Before the product is delivered,  the machine has, for example, been inspected and adjusted by your retailer. See the certificate in the Service  Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the
                    
                    Résumé du contenu de la page N° 7 
                    
                        SymBolS AND DECAlS These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. IMPORTANT INFORMATION WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx  Xxxx xxxxxx xxxxx xxxx xxxxxxxxx  xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. xxxxxx  xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. Used in this publication to notify the reader of a risk Used in this publication to notify the reader of a risk  of personal injury or death, particularly if the reader of 
                    
                    Résumé du contenu de la page N° 8 
                    
                        SAFETy These instructions are for your safety. Read them  carefully. General Operation • Read, understand, and follow all instructions  on the machine and in the manual before  starting. • Do not put hands or feet near rotating parts  or under the machine. Keep clear of the  discharge opening at all times. • Clear the area of objects such as rocks,  toys and wire, which could be picked up and  thrown by the blades. • Be sure the area is clear of bystanders  before operating. Stop machine if anyo
                    
                    Résumé du contenu de la page N° 9 
                    
                        SAFETy Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations)  shall be used. Personal protective equipment cannot eliminate the risk of injury but it  will reduce the degree of injury if an accident does happen. Ask your retailer for help in  choosing the right equipment. • Make sure first aid equipment is close at  hand when using the machine. • Never use the machine when barefoot.  Always wear protective shoes or boots,  pref
                    
                    Résumé du contenu de la page N° 10 
                    
                        SAFETy • Keep all movement on the slopes slow and  gradual. Do not make sudden changes in  speed or direction, which could cause the  machine to roll over. • Use extra care while operating machine with  grass catchers or other attachments; they  can affect the stability of the machine. • Do not use on steep slopes. • Do not mow near drop-offs, ditches, or  embankments. The machine could suddenly  roll over if a wheel is over the edge or if the  edge caves in. 8011-635 Be extra cautious when driv
                    
                    Résumé du contenu de la page N° 11 
                    
                        SAFETy WARNING! The engine must not be started when  the protective plate for the mower  deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use  extreme care in handling gasoline. Gasoline is  extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and  other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the  engine running. Allow engine to cool at least 
                    
                    Résumé du contenu de la page N° 12 
                    
                        SAFETy General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the  equipment is in safe working condition. • Never tamper with safety devices. Check  their proper operation regularly. • Keep machine free of grass, leaves, or other  debris buildup. Clean oil or fuel spillage  and remove any fuel-soaked debris. Allow  machine to cool before storing. • If you strike a foreign object, stop and  inspect the machine. Repair, if necessary,  before resta
                    
                    Résumé du contenu de la page N° 13 
                    
                        SAFETy • The machine is tested and approved only  with the equipment originally provided or  recommended by the manufacturer. only use  approved repair parts for the machine. • The mulch blades should only be used in  familiar areas when higher quality mowing is  desired. • Reduce the risk of fire by removing grass,  leaves, and other debris that may have  accumulated on the machine. Allow the  machine to cool before putting it in storage. • Regularly clean deck and underside of  deck, avoid spr
                    
                    Résumé du contenu de la page N° 14 
                    
                        CoNTRolS This operator’s manual describes the Husqvarna Walk- Using the left and right drive levers, the speed of the  Behind Mower. The machine is fitted with a Kawasaki rear wheels is regulated for steering the machine. four-stroke overhead valve engine. Control Locations 12 10 9 8 11 7 6 5 4 3 1 2 8062-036 8.  operator Presence Switch 1.  Fuel Cap/Tank 9.  Drive lever 2.  Throttle Control 3.  Choke Control 10. Neutral lock 4.  Ground Speed Control 11. Parking Brake 5.  Blade Engagement Contro
                    
                    Résumé du contenu de la page N° 15 
                    
                        CoNTRolS Ignition Switch The ignition key switch is located on the control panel  at the lower right. WARNING! The machine can turn very rapidly if  one steering control is moved much  further forward than the other. 8062-003 Ignition key Drive Levers The machine’s speed and direction are continuously  variable using the two motion control levers. By releasing both controls an equal amount the  machine moves in a straight line forward. In order, for example, to turn right while moving  forward, 
                    
                    Résumé du contenu de la page N° 16 
                    
                        CoNTRolS Operator Presence Levers located on the handle, the operator Presence  System levers serve as an additional safety feature.  An electrical interlock safety system is activated  by depressing either one or both of the operator  Presence levers at the handle grips. Releasing both operators Presence levers while  mowing or transporting will break the electrical circuit  and cause the engine and mower to stop. The mower  will not stop immediately after releasing the oP levers  and some trav
                    
                    Résumé du contenu de la page N° 17 
                    
                        CoNTRolS Throttle Control The throttle control regulates the engine speed and  thereby the rate of rotation of the blades, assuming the  blade engagement control is engaged (pulled up). In order to increase or decrease the engine speed, the  control is moved forward or backward respectively. Avoid idling the engine for long periods, as there is a  risk of the spark plugs fouling. For best mower performance, USE FUll THRoTTlE  WHEN moWING.  8062-003 Throttle control Neutral Lock located on top th
                    
                    Résumé du contenu de la page N° 18 
                    
                        CoNTRolS Parking Brake The parking brake is located behind the right hand tire  and is applied by pressing the pedal downwards. To  disengage the parking brake, push down and pivot the  pedal to the rear. 8062-005 Parking brake Blade Engagement Control The blade engagement control is on the center control  panel. In order to engage the blades, pull the control  upwards. The blades are disengaged when the lever is  pushed down. WARNING! Gasoline is highly flammable.  Observe caution and fill the 
                    
                    Résumé du contenu de la page N° 19 
                    
                        CoNTRolS Fuel Shut-off Valve The fuel shut off valve is placed on the fuel line below  the fuel tank. The valve is on when the turn lever is  parallel to the fuel line. The shut off position will have  the turn lever running perpendicular to the fuel line.  See illustration. WARNING! Fill to bottom of filler neck. Do not  overfill. Wipe off any spilled oil or fuel.  Do not store, spill or use gasoline  near an open flame. 8062-007 Fuel shut off valve - closed (OFF) Fuel Tank The machine has one 
                    
                    Résumé du contenu de la page N° 20 
                    
                        oPERATIoN Before Starting • Read the sections on Safety and Controls before  WARNING! starting the machine. Be thoroughly familiar with control  • Perform the daily maintenance before starting (see  operation and function before using  maintenance Schedule). the mower. • Check that there is sufficient fuel in the fuel tank. The following conditions must be fulfilled before the  engine can be started: • The control for engaging the blades must be in  disengaged (down) position. • The speed contro