Résumé du contenu de la page N° 1 
                    
                         
 
TL-WR743ND 
150Mbps Wireless AP/Client Router 
  
Rev: 2.0.0 
  
1910010644                                                                                                                                                                                                                                                                                                                                                                                                                                     
                    
                    Résumé du contenu de la page N° 2 
                    
                          COPYRIGHT & TRADEMARKS  Specifications are subject to change without notice.  is a registered trademark  of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or  registered trademarks of their respective holders.  No part of the specifications may be reproduced in any form or by any means or used to make any  derivative such as translation, transformation, or adaptation without permission from TP-LINK  TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO.,
                    
                    Résumé du contenu de la page N° 3 
                    
                          FCC RF Radiation Exposure Statement  This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled  environment. This device and its antenna must not be co-located or operating in conjunction with  any other antenna or transmitter.  “To comply with FCC RF exposure compliance requirements, this grant is applicable to only  Mobile Configurations. The antennas used for this transmitter must be installed to provide a  separation distance of at least 20 cm from all per
                    
                    Résumé du contenu de la page N° 4 
                    
                            This device has been designed to operate with the antennas listed below, and having a maximum  gain of 5 dBi. Antennas not included in this list or having a gain greater than 5 dBi are strictly  prohibited for use with this device. The required antenna impedance is 50 ohms.   To reduce potential radio interference to other users, the antenna type and its gain should be so  chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for  successful commu
                    
                    Résumé du contenu de la page N° 5 
                    
                          NCC Notice:  經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功 率或變更原設計之特性及功能。  低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並 改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電 機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。    Про дук т сер т ифік ов ано згідно с пра в илами си с т еми УкрСЕПРО на від п овідність вимог а м  норма т ивних док у ментів та вимог а м, що пе ре дб а ч ені чинними зак о но дав ч ими ак т ами  України.   - IV -                                                                                        
                    
                    Résumé du contenu de la page N° 6 
                    
                         TP-LINK TECHNOLOGIES CO., LTD  DECLARATION OF CONFORMITY  For the following equipment:  Product Description: 150Mbps Wireless AP/Client Router  Model No.: TL-WR743ND  Trademark: TP-LINK    We declare under our own responsibility that the above products satisfy all the technical  regulations applicable to the product within the scope of Council Directives:    Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC,  Directives 2011/65/EU  The above product is 
                    
                    Résumé du contenu de la page N° 7 
                    
                          CONTENTS  Package Contents..................................................................................................................................1  Chapter 1. Introduction.......................................................................................................................2  1.1 Overview of the Router .......................................................................................................2  1.2 Conventions .............................................
                    
                    Résumé du contenu de la page N° 8 
                    
                          4.6.3 LAN...................................................................................................................... 56  4.7 Wireless ........................................................................................................................... 57  4.7.1 Wireless Settings................................................................................................. 57  4.7.2 Wireless Security.............................................................................
                    
                    Résumé du contenu de la page N° 9 
                    
                          4.14 Bandwidth Control.......................................................................................................... 105  4.14.1 Control Settings ................................................................................................. 105  4.14.2 Rules List........................................................................................................... 106  4.15 IP& MAC Bing Setting..................................................................................
                    
                    Résumé du contenu de la page N° 10 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   Package Contents  The following items should be found in your package:   TL-WR743ND 150Mbps Wireless AP/Client Router   DC Power Adapter for TL-WR743ND 150Mbps Wireless AP/Client Router   One Power Injector   Quick Installation Guide   Resource CD for TL-WR743ND 150Mbps Wireless AP/Client Router, including:   This Guide   Other Helpful Information  Note:    Make sure that the package contains the above items. If any of the listed items are d
                    
                    Résumé du contenu de la page N° 11 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   Chapter 1. Introduction  1.1 Overview of the Router  The TL-WR743ND 150Mbps Wireless AP/Client Router integrates 4-port Switch, Firewall,  NAT-Router and Wireless AP. With Client Router Mode as the default mode, the 150Mbps Wireless  AP/Client Router can connect to the WISP, delivering exceptional range and speed for the users.  Meanwhile, TL-WR743ND creates a local area network for files sharing or Internet surfing via  wireless or wired connection
                    
                    Résumé du contenu de la page N° 12 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   Since the Router is compatible with virtually all the major operating systems, it is very easy to  manage. Quick Setup Wizard is supported and detailed instructions are provided step by step in  this user guide. Before installing the Router, please look through this guide to know all the  Router’s functions.  1.2 Conventions  The Router or TL-WR743ND mentioned in this guide stands for TL-WR743ND 150Mbps Wireless  AP/Client Router without any explana
                    
                    Résumé du contenu de la page N° 13 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   1.4 Panel Layout  1.4.1 The Front Panel    Figure 1-1 Front Panel sketch  The Router’s LEDs are located on the front panel (View from left to right).   Name Status Indication  Off Power is off.  (Power)  On Power is on.  Flashing The Router is working properly.   (System)  On /Off The Router has a system error.  Off The Wireless function is disabled.   (WLAN)  Flashing The Wireless function is enabled.  Off There is no device linked to the correspon
                    
                    Résumé du contenu de la page N° 14 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   Note:    After a device is successfully added to the network by WPS function, the WPS LED will keep on  for about 5 minutes and then turn off.   1.4.2 The Rear Panel    Figure 1-2  Rear Panel sketch  The following parts are located on the rear panel (View from left to right).   RESET:  There are two ways to reset to the Router's factory defaults:  1) Use the Factory Defaults function on “System Tools → Factory Defaults” page in the  Router's Web-b
                    
                    Résumé du contenu de la page N° 15 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router    INTERNET: This INTERNET port is where you will connect the DSL/cable Modem, or  Ethernet.   WPS: If you have client devices, such as wireless adapters, that support Wi-Fi Protected  Setup, then you can press this button to quickly establish a connection between the Router  and client devices and automatically configure wireless security for your wireless network.    Wireless antenna: To receive and transmit the wireless data.  - 6 -             
                    
                    Résumé du contenu de la page N° 16 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   Chapter 2. Connecting the Router  2.1 System Requirements   Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45  connectors   TCP/IP protocol must be installed on each PC   Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later   If the device is configured to Client Router mode, you also need Wireless Internet Access  Service (WISP)   If the device is configured to Router 
                    
                    Résumé du contenu de la page N° 17 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   a) Client Router Mode    Figure 2-1 Hardware Installation of the TL-WR743ND in Client Router mode  1. Connect the notebook/PC to the LAN port of TL-WR743ND router with an Ethernet cable.  2. Plug one end of the provided power adapter into the POWER jack of the router, and the other  end to a standard electrical wall socket.  3. Press the ON/OFF button of the router.  b) Router Mode    Figure 2-2 Hardware Installation of the TL-WR743ND in Router mode
                    
                    Résumé du contenu de la page N° 18 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   c) Repeater Mode (Range Extender)    Figure 2-3 Hardware Installation of the TL-WR743ND in Repeater mode  1. Plug one end of the provided power adapter into the POWER jack of the router, and the other  end to a standard electrical wall socket.  2. Press the ON/OFF button of the router.  Note:    It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet  cable, and then login the Router from the PC/notebook to s
                    
                    Résumé du contenu de la page N° 19 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   e) Client Mode    Figure 2-5 Hardware Installation of the TL-WR743ND in Client mode  1. Connect the PC to the LAN port of TL-WR743ND router with an Ethernet cable.  2. Plug one end of the provided power adapter into the POWER jack of the router, and the other  end to a standard electrical wall socket.  3. Press the ON/OFF button of the router.  - 10 -                                                                                                    
                    
                    Résumé du contenu de la page N° 20 
                    
                        TL-WR743ND 150Mbps Wireless AP/Client Router   Chapter 3. Quick Installation Guide  This chapter will show you how to configure the basic functions of your TL-WR743ND 150Mbps  Wireless AP/Client Router using Quick Setup Wizard within minutes.  3.1 TCP/IP Configuration  The default domain name of the TL-WR743ND 150Mbps Wireless AP/Client Router is  http://tplinklogin.net, the default IP address is 192.168.0.1, and the default Subnet Mask is  255.255.255.0. These values can be changed as you desir