Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Elo Entuitive Touchmonitor User Guide For 15", 17" and 19" CRT Open Frame Series Touchmonitors ET1X8XC-4SWA-1 Series Models Revision C P/N 008551 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com www.elogaming.com
Résumé du contenu de la page N° 3
Résumé du contenu de la page N° 4
Copyright © 2003 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Résumé du contenu de la page N° 5
iv
Résumé du contenu de la page N° 6
Table of Contents Chapter 1 Warranty 31 Introduction 1 Index 33 Precautions . . . . . . . . . . . . . . . . . . . . 1 About the Product . . . . . . . . . . . . . . . . . 1 Chapter 2 Installation and Setup 3 Unpacking Your Touchmonitor. . . . . . . . . . . 3 Connecting Your Touchmonitor . . . . . . . . . . 4 Connect the Video Cable. . . . . . . . . . . . 4 Connect the Serial Touchscreen Cable . . . . 5 Connect the Power Cable .
Résumé du contenu de la page N° 7
vi
Résumé du contenu de la page N° 8
C H A P TER 1 C HAPT ER 1INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new high-resolution touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in CRT display design. This combination of features creates a natural flow of information between a user and the touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your
Résumé du contenu de la page N° 9
RS-232 touch interface. 1-2 Elo Entuitive Tou chmon ito r User Guide
Résumé du contenu de la page N° 10
C H A P TER 2 C HAP TER 2INSTALLATION AND SETUP This chapter discusses how to install your CRT touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 5 items are present and in good condition: NOTE: Power cord is not included. CD Software CD Software Quick Installation Guide CRT Touchmonitor Quick Installation VGA cable Serial cable Guide 2-3
Résumé du contenu de la page N° 11
Connecting Your Touchmonitor IMPORTANT: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. Female 9-pin serial touchscreen connector Video cable Female 15-pin Power video connector Serial touchscreen cable Connect the Video Cable Connections on underside Female 15-pin video connector Video port Video cable Connect one end of the video cable to the video connector on your PC and the other end of the cable to the video connector
Résumé du contenu de la page N° 12
Connect the Serial Touchscreen Cable Connections on underside Female 9-pin cable connector Video Video port cable Serial cable Ferrite bead Connect the touchscreen cable. Connect one end to the appropriate port on the back of your computer. Connect the other end of the cable to the touchscreen connector on your touchmonitor. The touchscreen cable connectors should fit snugly into the connectors on your touchmonitor and computer. Secure the cable by turning the thumbscrews on each connector
Résumé du contenu de la page N° 13
Connect the Power Cable Connections on underside Power cable Power cable Your monitor does not include a power cable. You may either purchase a country specific power cable from Elo (www.elogaming.com), or construct your own custom power cable (see Appendix B for details). Connect the power cable to the AC connector on your touchmonitor. To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a switched surge prote
Résumé du contenu de la page N° 14
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Additional drivers and driver information for other operating systems are available on the Elo TouchSystems web site at www.elogaming.com. Your Elo touchmonitor is plug-and-play compliant. Information o
Résumé du contenu de la page N° 15
Installing the Touch Driver for Windows XP, Windows 1 2000 , Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 2 Follow the directions on the screen to complete the driver setup for your version of Windows. If the AutoStart feature is not ac
Résumé du contenu de la page N° 16
Installing the Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter). 3 Type
Résumé du contenu de la page N° 17
2-10 Elo En tuitive Touchmonitor User Gu ide
Résumé du contenu de la page N° 18
C H A P TER 3 C HAP TER 3OPERATION About Touchmonitor Adjustments By design, your Elo Entuitive touchmonitor should not require any adjustments. The factory settings will give you optimum video results with most standard PC video display adapters. However, after connecting your touchmonitor you can further optimize the settings to meet your requirements by following the directions in this chapter. All adjustments you make to the controls are automatically memorized, so you do not need to res
Résumé du contenu de la page N° 19
Touchmonitor Controls You can adjust the screen display by using the plastic knob labeled OSD located on the right-hand side of the touch controller bracket. Using the On Screen Display (OSD) 1 Push the OSD knob to access the OSD. 2 Turn the OSD knob to choose the item you want to adjust. The selected item is highlighted. See figure 3.1 for OSD menu options. 3 Push the OSD knob to adjust the highlighted item. The display unit automatically saves the new settings in about 45 seconds after you
Résumé du contenu de la page N° 20
OSD Adjustments Symbol Function Process H. Size Adjusts the horizontal size of the entire screen image. Adjusts the horizontal position of the entire screen image. H. Position V. Size Adjusts the vertical size of the entire screen image. V. Position Adjusts the vertical position of the entire screen image. Simultaneously changes vertical and horizontal image size. Zoom Geometry See Figure 3.4, page 3-16. If the vertical sides of the picture curve in or bulge out, you Pincushion can correct the
