Résumé du contenu de la page N° 1
User's Guide
W2220P
Make sure to read the Important Precautions before using the
product. Keep the User's Guide(CD) in an accessible place for future
reference.
See the label attached on the product and give the information to
your dealer when you ask for service.
Résumé du contenu de la page N° 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national stan
Résumé du contenu de la page N° 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Résumé du contenu de la page N° 4
Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benz
Résumé du contenu de la page N° 5
Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Power Cord User's Guide/Cards (Depending on the country) DVI-D Signal Cable 15-pin D-Sub Signal Cable (This feature is not available (To set it up, this signal cable may in all countries.) be attached to this product before shipping out.) NOTE This accessories may look different from those shown here. User must use shielded si
Résumé du contenu de la page N° 6
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Assemble the stand base into the standbody in the correct direction as shown in the picture. Stand Base Stand Body 3. Once assembled take the monitor up carefully and face the front side. WARNING The tape and locking pin may only b
Résumé du contenu de la page N° 7
Connecting the Display Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. While pressing the latches, push the stand base in the direction of the arrow to separate from the stand body. IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Posit
Résumé du contenu de la page N° 8
Connecting the Display Swivel Range : 355˚ 355 Height Range : maximum 4.33 inches (110.0 mm) 110.0 mm * Please be sure to remove the Locking pin to adjust the height. WARNING You do not need to replace the Locking pin after it is removed, to adjust its height. ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. 7
Résumé du contenu de la page N° 9
Connecting the Display Using the Pivot function -The pivot function allows you to rotate the screen 90 degrees clockwise. 1. Lift the monitor to its highest height to utilize the Pivot function. o 2. Landscape & Portrait : You can rotate the panel 90 clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. Head section Stand se
Résumé du contenu de la page N° 10
Connecting the Display Connecting with the PC/AV equipment 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screw 1 2 of the signal cable. A Connect DVI-D Cable B Connect D-SUB Cable C Connect HDMI Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may
Résumé du contenu de la page N° 11
Connecting the Display 3. Put the power cord and cables into the cable holder. Cable Holder 4. Press the Power Button ( ) on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only for D-SUB input) NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal
Résumé du contenu de la page N° 12
Control Panel Functions Front Panel Controls Use this button to move to items in MODE (MOVIE, TEXT, MODE Button PHOTO, USER, sRGB). For more information, refer to page 16. MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any
Résumé du contenu de la page N° 13
Control Panel Functions Use these buttons to select or adjust functions in the Buttons On Screen Display. To adjust the headphone/earphone volume. Press the AUTO/SET button to MUTE ON and press it once again to MUTE OFF. (Only for HDMI input) MUTE OFF Use the buttons to adjust the volume. MUTE ON When two or more input signals are connected, you can select the input signal (D-SUB/DVI-D/HDMI) you (SOURCE Hot key) want. When only one signal is connected, it is automatically detected.
Résumé du contenu de la page N° 14
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: Move where Select a Adjust the Exit
Résumé du contenu de la page N° 15
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. DSUB : D-SUB(Analog signal) input DVI : DVI-D(Digital signal) input HDMI : HDMI input Main menu Sub-menu Supported signals Description MODE MOVIE DSUB It is a mode that the screen is DVI adjusted to the best to view the videos. HDMI TEXT It is a mode that the screen is adjusted to the best for the text works. PHOTO It is a mode that the scre
Résumé du contenu de la page N° 16
On Screen Display(OSD) Selection and Adjustment HORIZONTAL TRACKING DSUB Adjusts the position of the screen VERTICAL CLOCK DSUB Adjusts the clarity and stability of the screen PHASE SHARPNESS DSUB DVI HDMI LANGUAGE SETUP DSUB Additional settings DVI OSD POSITION HDMI (HORIZONTAL / VERTICAL) DSUB WHITE BALANCE HDMI OVERSCAN DSUB POWER INDICATOR DVI HDMI 4:3 IN WIDE FACTORY RESET NOTE The order of icons may differ depending on the model (14~21). 15
Résumé du contenu de la page N° 17
On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the MODE button on the front of the monitor. Menu Name MENU : Exit : Move Icons SET : Select Sub-menu Name Main menu Description MOVIE It is a mode that the screen is adjusted to the best to view the videos. It is a mode that the screen is adjusted to the TEXT best for the text works. PHOTO It is a mode that the screen is adjusted to the best to view pictures. USER It is a mode that the user can adjus
Résumé du contenu de la page N° 18
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu : Restart to select sub-menu Button Tip Menu Name Sub- Icons menus NOTE OSD (On Screen Display
Résumé du contenu de la page N° 19
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE D-SUB/DVI-D input BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. GAMMA Set your own gamma value. : 1.8 ~ 2.6 On the monitor, high gamma values display whitish images and low gamma HDMI Input values display blackish images. BLACK LEVEL You can set the offset level. If the black level value becomes higher, the screen grows brighter. If the value becomes lowe
Résumé du contenu de la page N° 20
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description COLOR PRESET Mode COLOR TEMP Select either PRESET or USER to adjust the screen color. PRESET Select the preset color temperature. 5700K-6500K: Yellow screen color. 6500K-7500K: Red screen color. 8500K-9300K: Blue screen color. USER Mode USER A user can create screen color by adjusting RED, GREEN and BLUE. RED Set your own red color levels. GREEN BLUE SIX COLOR Sets and stores the hue and saturation for six colo
