Résumé du contenu de la page N° 1 
                    
                        RC90
Ceramic Hob
User Guide
&
Installation & Service Instructions
U109917 - 02                                                                                                                                                                                                                                                                                                                                                                                                                                      
                    
                    Résumé du contenu de la page N° 2 
                    
                        Contents Before You Start... 1 Ceramic Hob Overview 3 Cleaning Your Hob 8 Troubleshooting 9 Installation 10 Circuit Diagram 13 Technical Data 14 Warranty/After Sales Service 15                                                                                                                                                                                                                                                                                                                                    
                    
                    Résumé du contenu de la page N° 3 
                    
                        DocNo.012-0001 - Introduction - BI hob ceramic 1. Before You Start... Thank you for buying a Rangemaster hob. It should give you  Never operate the hob with wet hands.   many years trouble-free cooking if installed and operated  Never heat unopened food containers. Pressure  correctly. It is important that you read this section before you    build up may make the containers burst and cause  start, particularly if you have not used a ceramic hob before. injury. This appliance is designed for do
                    
                    Résumé du contenu de la page N° 4 
                    
                        Hob Care Cleaning Never cook directly on the hob surface. The ceramic surface should be washed after use in order to  prevent it from becoming scratched or dirty. Do not use the hob surface as a cutting board. In the interests of hygiene and safety, the hob should be kept  Do not leave utensils, foodstuffs or combustible items on  clean at all times as a build up in fats and other foodstuffs  the hob when it is not is use (e.g. tea towels, frying pans  could result in a fire. containing oil). Clean
                    
                    Résumé du contenu de la page N° 5 
                    
                        2. Hob Overview � ������������� �������������� � ������������� Fig.2-1 ����� �������������� �� ������� ������������ �� ������� ����� �������������� �� �������� � �� �� �������������� �� ������� � ������������������� �� �������� � �� �� �������������� �� ������� ArtNo.315-0001 90 Ceramic hob � ������������� � � ���� ��� �������������� � ������������� ������������ �� ������� ����� �������������� �� ������� � �� �� �������������� �� ������� The ceramic hob comprises of five cooking zones containing 
                    
                    Résumé du contenu de la page N° 6 
                    
                        Fig.2-5 � � � � � � � � � � ArtNo.315-0016 RC90 control panel � � �� � � � �� � 1. Power ON/Power OFF 5. Dual element selector key 7. Timer key 11. Child lock key  2. Cooking element ‘+’ key  (Indicator light above) 8. Timer ‘+’ key  (Indicator light above)  3. Cooking element ‘–’ key 6. Triple element selector key 9. Timer ‘–’ key  4. Cooking zone digital display  (Indicator lights above)  10. Timer digital display  pans wastes heat, and any spillage will be burnt on. Using a  Fig.2-6 lid will 
                    
                    Résumé du contenu de la page N° 7 
                    
                        Note: The ‘+’ and ‘–‘ keys have a repeat function: holding a key  Fig.2-9 pressed down will increase or decrease the power setting by  one level every 0.3 seconds. To shutdown a cooking zone: Press the relevant ‘–‘ key to reduce the power to 0. Rapid shutdown: ArtNo.315-0021 RC90 Rapid shutdown To quickly switch off a selected zone press the ‘+’ and ‘–‘ keys  simultaneously: this will immediately switch off that zone  (Fig.2-9). Fig.2-10 Note: After a zone has been switched off an ‘H’ may appear in
                    
                    Résumé du contenu de la page N° 8 
                    
                        Timer Function Fig.2-14 � ��� ����� ��������� � �� The timer has two settings: • Zone timer • Minute timer ArtNo.315-0026 RC90 Setting the zone timer Zone timer This allows any one of the cooking zones to be programmed  to cook up to a maximum of 99 minutes at a set power level.  At the end of the cooking time an alarm will sound and the  zone will automatically turn off. � ������ �� Note: The timer function can only be assigned to one of the  cooking zones at a time. Activating the timer: Fig.2-
                    
                    Résumé du contenu de la page N° 9 
                    
                        Deactivating the timer: � � � ����� � �� �� �� ����������� Press and hold the timer key. The timer display will reset to  � �������� ‘00’ and after a few seconds go out. � ������� � ������� Child Lock Function � �������� � ������� IMPORTANT: Make sure that all cooking zones are switched  � ������� off before operating the child lock. If the lock is operated  � ������� when any cooking zones are active they will remain on. Any  � ������� active zones can be turned off by pressing the ‘+’ and ‘–‘  �
                    
                    Résumé du contenu de la page N° 10 
                    
                        DocNo.042-0001 - Cleaning - BI hob ceramic 3. Cleaning Your Hob Essential information Cleaning burned-on spills Allow the hob to cool and isolate the electricity supply before Make sure that the residual heat indicators are off and that  carrying out any thorough cleaning. the hob is cool. Remove the excess burned-on substance with  a single-edged razor scraper. Hold the scraper at an angle of  Never use paint solvents, washing soda, caustic cleaners,  about 30° to the surface and then scrape off 
                    
                    Résumé du contenu de la page N° 11 
                    
                        DocNo.052-0001 - Troubleshooting ceramic & induction 4. Troubleshooting If there is an installation problem and I don’t get  my original installer to come back to fix it, who  pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your  original installer. Therefore, it’s in your own interest to  keep track of this installer so that you can contact them  as required. A crack has appeared in the hob surface. Isolate the hob immediately from 
                    
                    Résumé du contenu de la page N° 12 
                    
                        INSTALLATION Check the appliance is electrically safe when you have finished. 5. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details The hob may be installed in a kitchen/kitchen diner but NOT  BELOW. in a room containing a bath or shower. Should your customer have a problem relating to your This appliance is designed for domestic cooking only. Use for  installation they will be able to contact you easily. any other purpose could invalid
                    
                    Résumé du contenu de la page N° 13 
                    
                        INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob Fig.5-1 The hob should be fitted into a work surface, which is at least ������ ��� 600mm deep. In position, it has a maximum thickness of 5mm  ���� from the top of the work surface. The cut-out dimensions are  shown in (Fig.5-1) and the minimum clearances in   (Fig.5-2). The minimum recommended distances from the  hob to nearby surfaces are shown in (Fig.5-3). ����� ����� ��������� *Any hob hood shoul
                    
                    Résumé du contenu de la page N° 14 
                    
                        INSTALLATION Check the appliance is electrically safe when you have finished. Electrical Connections Fig.5-4 ��� This appliance must be installed by a qualified electrician  � ���� �� to comply with the relevant Institute of Electrical  Engineers (I.E.E.) regulations and also the local electricity  ����� supply company requirements. WARNING: THIS APPLIANCE MUST BE EARTHED   ����� � Note: All external wiring must comply with the IEE  Regulations for the Electrical Equipment of Buildings.  Connecti
                    
                    Résumé du contenu de la page N° 15 
                    
                        ���� ���� ���� ���� ������ � ����� ������ � ����� ����� ����� ����� ����� ����� ����� ������� ������ 6. Circuit Diagram � � � � � � � � � � �� �� � �� � � � � ����� � � ���� � � � ���� � � � � � �� � �� � � � � ���� � � � �� �� ���� � �� � ��� �� �� � � �� �� � �� � �� � �� � � � � � �� � � � � � � � ���� � � �� � ���� � �� � ��� �� �� �� �� �� �� �� � � �� �� �� �� �� �� �� �� �� � �� � ������� ��� � �� ���� ��� �� � �� ArtNo.080-0011 - RC90 circuit diagram ��� ����� � ��� �� ���� � �� � �� � �
                    
                    Résumé du contenu de la page N° 16 
                    
                        DocNo.102-0003 - Technical data - RC90 7. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION:  Base of the hob. COUNTRY OF DESTINATION:  GB/IE Dimensions  45mm; Above worktop 5mm;  Overall height (65mm including connection box) Below worktop 40mm Overall width 900mm; see ‘Positioning of the Hob’ Overall depth 510mm Space for fixing See ‘Positioning of the Hob’ Minimum space above hotplate 600mm Connections Electric 220 – 240V 50Hz Ratings Maximum total e
                    
                    Résumé du contenu de la page N° 17 
                    
                        DocNo.111-0001 Warranty 8. Warranty/After Sales Service If consultation or technical assistance is needed, please  provide the local authorised service agent with the purchase  invoice and the product code/serial number. The 2 years free maintenance for the operation of the  appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported  within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please 
                    
                    Résumé du contenu de la page N° 18 
                    
                        16                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                    
                    Résumé du contenu de la page N° 19 
                    
                        17                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                    
                    Résumé du contenu de la page N° 20 
                    
                        DocNo.000-0001 - Back cover Rangemaster � � �� � ����������� �������� ������� ������� �� w w w . r a n g e m a s t e r . c o . u k ArtNo.000-0003 CE logo