ページ1に含まれる内容の要旨
ENGLISH
ESPAÑOL
Office All-In-One
Equipo multifunción de oficina
series
Getting Started
Read Me First
Guía de inicio
Léame en primer lugar
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
ページ2に含まれる内容の要旨
■ Symbols Used in This Document ■ Símbolos utilizados en este documento Prohibited actions. Acciones prohibidas. Instructions including important information. Instrucciones que incluyen información importante. Informational notes. Notas informativas. Operations that take some time to complete. Operaciones que tardan cierto tiempo en completarse. Indicates operations in Windows. Indica las operaciones en Windows. Indicates operations in Macintosh. Indica las operaciones en Macintosh. In this guid
ページ3に含まれる内容の要旨
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. For some languages parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 84. Los manuales en pantalla se pueden ver en un ordenador. Se incluyen en el Setup CD-ROM y se instalan durante el proceso de instalación del software. Quizá en algunos idiomas haya partes del manual que aparezcan en inglés. Para ob
ページ4に含まれる内容の要旨
■ Contents ■ Contenido 1 Check the Included Items P.5 1 Compruebe los elementos que se incluyen P.5 2 Remove the Protective Material P.6 2 Retirada del material protector P.6 3 Connect the Telephone Line P.9 3 Conexión de la línea telefónica P.9 4 Turn the Power On P.11 4 Encendido del equipo P.11 5 Install the FINE Cartridges P.14 5 Instalación de los cartuchos FINE (FINE Cartridges) P.14 6 Load Paper P.19 6 Carga del papel P.19 7 Set Up for Fax Reception P.20 7 Configuración del equipo
ページ5に含まれる内容の要旨
■ Machine Installation Flow Network Connection Conexión de red USB Connection ■ Flujo de instalación Conexión USB Wireless Connection del equipo Using from Additional Computers Conexión inalámbrica (when the machine is already connected to the network and you want to add computers from which to use the machine) Uso desde ordenadores adicionales Machine Preparation P.4 - 19 (cuando el equipo ya está conectado a la Preparación del equipo red y se desea agregar ordenadores desde los que utili
ページ6に含まれる内容の要旨
■ Devices Required for Wireless Connection ■ Dispositivos necesarios para la conexión inalámbrica When using the machine over a wireless connection, the following devices are required. Cuando utilice el equipo mediante una conexión inalámbrica, se necesitan los siguientes dispositivos. The supplied Wireless LAN setup cable is temporarily required for wireless setup. Access point or wireless Wireless LAN setup router cable El cable de configuración LAN inalámbrica suministrado se necesita temp
ページ7に含まれる内容の要旨
Check that all the items shown below are included in the box. Compruebe que todos los elementos que se citan a continuación están incluidos en la caja. 1 Color Black Telephone line cable Power cord FINE cartridges Color Negro Cable de línea telefónica Cable de alimentación Cartuchos FINE (FINE Cartridges) Wireless LAN setup cable Setup CD-ROM (containing the drivers, Manuals applications and on-screen manuals) This cable can be used not only for wireless connection Other documents setup but als
ページ8に含まれる内容の要旨
1 2 2 A Remove all the protective materials and orange tape from the outside of the machine. Open the Paper Output Tray (A). • The tape and protective materials may differ in shape and position from what they actually are. Retire la cinta naranja y todos los materiales protectores del exterior del equipo. Abra la bandeja de salida del papel (A). • La forma y la posición de la cinta y los materiales protectores pueden variar respecto a las reales. Remove the Protective Material Retirada del mat
ページ9に含まれる内容の要旨
D 3 4 F D C E B Lift the Scanning Unit (Cover) (B) and fix it with the Scanning Unit Support (C). Remove the orange tape (E) carefully. Close the Document Cover (D) and lift it with the Scanning Unit (Cover). The protective material (F) is removed along with the orange tape. Levante la unidad de escaneado (cubierta) (B) y sujétela con el soporte de la unidad Retire la cinta naranja (E) con cuidado. de escaneado (C). El material protector (F) se retira junto con la cinta naranja. Cierre la cubier
ページ10に含まれる内容の要旨
5 1 2 3 Lift the Scanning Unit (Cover) slightly (1) and fold the Scanning Unit Support (2), then gently close the Scanning Unit (Cover) (3). Levante la unidad de escaneado (cubierta) ligeramente (1) y pliegue el soporte de la unidad de escaneado (2) para cerrar después la unidad de escaneado (cubierta) (3) con cuidado.
ページ11に含まれる内容の要旨
Do not turn the power on yet. 3 Aún no encienda el equipo. To use the machine as a fax, a telephone line needs to be connected. This section describes the basic method of telephone line connection. For other connection methods, refer to the on-screen manual: Basic Guide. When not using as a fax: Go to "4 Turn the Power On" on page 11. When using as both a fax and telephone: on page 10. When using as a fax only: on page 10. • If you cannot send faxes after installing the machine, check the t
ページ12に含まれる内容の要旨
1 Only when connecting 1 2 a telephone: C Sólo al conectar un teléfono: 2 A B Connect one end of supplied telephone line cable (A) to the lower connector labeled Remove the Cap (C) (1), then connect a telephone with the telephone line cable (2). "L" on the machine, and then connect the other end to the telephone jack on the wall (B). • Do not connect the machine and a telephone in parallel to the same telephone line using When using as a fax only: a distribution adapter. The machine may not
ページ13に含まれる内容の要旨
1 4 A Insert the power cord into the connector on the left side of the machine and into the wall outlet. • Do NOT connect the Wireless LAN setup cable (USB cable) at this stage. • Make sure that the Document Cover (A) is closed. • Do not install the machine where an object may fall on it. The object may fall inside the machine, resulting in malfunction. • Do not place any object on top of the machine. It may fall into the machine when opening covers, resulting in malfunction. Enchufe el cabl
ページ14に含まれる内容の要旨
C D E B 2 3 4 Press the ON button (B) to turn on the Use the [ or ] button (C) on the Operation Panel to select Make sure that the above screen is displayed and go to the machine. the language for the LCD (Liquid Crystal Display) (D), then next step. press the OK button. • If an unintended language is displayed on the LCD, press the Back button (E) to return to the Language selection screen. Pulse el botón ACTIVADO (ON) (B) Utilice el botón [ o ] (C) del panel de control para seleccionar Compr
ページ15に含まれる内容の要旨
When it is necessary to power off the machine Cuando sea necesario apagar el equipo A B 1 2 Be sure to follow the procedure below. • When removing the power plug, make sure that the lamp of the ON button is not lit before removing the plug. Removing the power plug while the lamp of the ON button lights up or flashes may cause drying and clogging of the FINE Cartridges, resulting in poor printing. 1. Press the ON button (A) to turn off the machine. 2. Make sure that the lamp (B) of the ON butto
ページ16に含まれる内容の要旨
E 1 5 F E D A G Lift the Scanning Unit (Cover) (A) and • Do not touch the buttons or LCD (F) on the Operation Panel (G). May result in unintended operation. fix it with the Scanning Unit Support (D). • When opening the Scanning Unit (Cover), the FINE Cartridge Holder moves automatically. • If the FINE Cartridge Holder does not move, make sure that the machine is turned on. Close the Document Cover (E) and lift it with the • If the Scanning Unit (Cover) is left open for more than 10 minutes, the
ページ17に含まれる内容の要旨
2 3 4 H I Make sure that the FINE Cartridge Holder Follow the next procedure to insert the Black and Open the Ink Cartridge Locking Cover on the right side. (H) moves to the installation position. Color FINE Cartridges into their corresponding slots and . Pinch (I) firmly and pull up the cover. Asegúrese de que el soporte de Siga el siguiente procedimiento para insertar los Abra la tapa de bloqueo del cartucho de tinta del lado derecho. cartucho FINE (FINE Cartridge Holder) cartuchos F
ページ18に含まれる内容の要旨
L K 5 6 J Remove the Black FINE Cartridge from its package. Pull the orange protective tape (J) in the direction of the arrow and remove it carefully. • Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied FINE Cartridges. • Be careful not to stain your hands or surrounding work area with ink on the removed protective tape. • Do not touch the Electrical Contacts (K) or Print Head Nozzles (L) on a FINE Cartridge. The machine may no
ページ19に含まれる内容の要旨
7 8 Place the Black FINE Cartridge into the right slot . Push down of the Ink Cartridge Locking Cover until you hear a click to close it completely. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). • Do not knock the FINE Cartridge against the sides of the holder. • Install in a well-lit environment. • Install the Black FINE Cartridge into the right slot , and the Color FINE Cartridge into the left slot . Coloque el cartucho
ページ20に含まれる内容の要旨
9 10 11 1 2 3 Insert the Color FINE Lift the Scanning Unit (Cover) slightly (1) and fold Make sure that the LCD changes • Once you have installed the FINE Cartridge into the left the Scanning Unit Support (2), then gently close the as shown in the illustration and go Cartridges, do not remove them unnecessarily. FINE Cartridge Holder Scanning Unit (Cover) (3). to the next step. • If an error message is displayed on in the same way as the the LCD, make sure that the FINE Black FINE Cart
