ページ1に含まれる内容の要旨
Xerox WorkCentre
Xerox DocuColor
PDL Reference Guide for the
WorkCentre M128/M123
October 20, 2004
dc05cc0364
Accessing Extended
Features
Overview
This document enables you to access the extended features of the WorkCentre
M128/M123 in environments where Xerox does not provide a custom driver.
NOTE: Some of the commands and syntax used in this documents requires
familiarity with either PostScript (PS) or Printer Command Language (PCL).
This document provides the Printe
ページ2に含まれる内容の要旨
PostScript This WorkCentre supports PostScript 3 commands that enable the features listed in the following table. Feature Description Media Size Physical paper (media) size (width and height) Media Direction Feed direction of paper Media Source Feed tray Media Source Specify if you feed from SMH (Sheet Media Handler). from SMH Media Color Paper color Media Weight Media weight. Unit: (g/㎡) gram per square-meter Media Class Specify a Media Class value to trigger media-related actions
ページ3に含まれる内容の要旨
Feature Description Separation Color Specify the process colorant name. Names Separation Specify the order of process colorant name. Order Use CIE Color Specify to apply CIE-based color space through color conversion PostScript Implementation This section describes the PostScript commands required to access specific WorkCentre features. The following table lists each feature and the PostScript syntax required to use the feature. After the table are examples of how to use these commands
ページ4に含まれる内容の要旨
Feature Implementation Values [459 649] = C5 [340 666] = Tyoukei You 3 Media <> Where int is one of the following: Direction setpagedevice 0 = Short Edge; top of page in portrait orientation. 1 = Long Edge; left side of page in portrait orientation. 2 = Short Edge; bottom of page in portrait orientation. 3 = Long Edge; right side of page in portrait orientation. null* = Auto Media Source <> Where int is one of the following: 0 = Tray1 setpag
ページ5に含まれる内容の要旨
Feature Implementation Values Media <> true* = Deferred media selection by output device (more powerful and flexible setpagedevice media selection) false = Immediate media selection by strict setpagedevice operator Resolution <> Where x and y are one of the following: setpagedevice 600 600*(dpi) 1200 1200 Duplex <> Where value is one of the following: setpagedevice true
ページ6に含まれる内容の要旨
Feature Implementation Values Quantity <> Where value is one of the following: integer from 1 to 9999: number of copies setpagedevice null: Not specified Collation <> Where value is one of the following: setpagedevice true = collated false* = uncollated Jog <>setpagedevice Where int is one of the following: 0 = Do not offset 3 = Offset at the beginning of each page [set] Stapling <
ページ7に含まれる内容の要旨
Feature Implementation Values Process Color <> Where name is one of the following: Model setpagedevice /DeviceGray /DeviceRGB (with Separations true) /DeviceCMYK (with Separations true) /DeviceCMY (with Separations true) /DeviceRGBK (with Separations true) Separations <> Where value is one of the following: true = Multiple color separations will be setpagedevice generated for each page of output. false* = All colorants will be combined i
ページ8に含まれる内容の要旨
Sample PostScript Headers Example 1 Header for Simple Print %!PS Example 2 Header for Finishing (Letter paper, duplex, 10 copies with collation, stapling with left-upper single and stacker tray for output bin) %!PS <>setpagedevice <>setpagedevice <>setpagedevice <>setpagedevice <>setpagedevice <> >>setpagedevice PostScrip
ページ9に含まれる内容の要旨
PostScript Fonts The following PostScript fonts are resident with Adobe interpreter. Albertus Goudy Oldstyle Italic Albertus Italic Goudy Bold Albertus Light Goudy Bold Italic Antique Olive Roman Goudy Extra Bold Antique Olive Italic Helvetica Antique Olive Bold Helvetica Oblique Antique Olive Compact Helvetica Bold Apple Chancery Helvetica Bold Oblique Arial Helvetica Narrow Arial Italic Helvetica Narrow Oblique Arial Bold Helvetica Narrow Bold Arial Bold Italic H
ページ10に含まれる内容の要旨
Symbol Univers 65 Bold Tekton Regular Univers 65 Bold Oblique Times Roman Univers 57 Condensed Times Italic Univers 57 Condensed Oblique Times Bold Univers 67 Condensed Bold Times Bold Italic Univers 67 Condensed Bold Oblique Times New Roman Univers 53 Extended Times New Roman Italic Univers 53 Extended Oblique Times New Roman Bold Univers 63 Extended Bold Times New Roman Bold Italic Univers 63 Extended Bold Oblique Univers 45 Light Wingdings Univers 45 Light Oblique
ページ11に含まれる内容の要旨
PCL This WorkCentre supports PCL5e and PCL XL color emulations that enable the features listed in the following table. Feature Description Job Name Job identifier Custom Paper Size Customer designated paper size – available only for PCL Media Size Dimensions of paper Media Source Feed tray Output Location Output bin Stapling Indicate a staple position Collation Multiple pages in sequential sets (page 1, 2, 3, 4, etc.) or multiple pages in sets of the same page (4 copies of page
ページ12に含まれる内容の要旨
PCL/PJL Implementation This section includes the PCL commands for specific features. The following table lists each feature and the PCL syntax required to use the feature. Following the table are examples of how to use these commands and the PCL file. Refer to these reference materials: PCL5 Printer Language Technical Reference Manual and Printer Job Language Technical Reference Manual, Hewlett-Packard Manual. Feature Implementation Values Job Name ＠PJL SET JOBNAME = Where jobname-str
ページ13に含まれる内容の要旨
Feature Implementation Values Media Size &l int A Where int is one of the following: (continued) 2 = Letter (8.5 x 11) 3 = Legal (8.5 x 14) 6 = Ledger (11x17) 12 = B5 (JIS) 13 = A5 26 = A4 27 = A3 46 = B4 (JIS) 74 = 8Kai 131 = 16Kai Media Source @PJL SET MEDIASOURCE Where value is one of the following: = value TRAY1 = Feed from paper tray1 TRAY2 = Tray2 TRAY3 = Tray3 TRAY4 = Tray4 TRAY5 = SMH &l int H Where int is one of the following: 0 = Feed paper from default
ページ14に含まれる内容の要旨
Feature Implementation Values &l int X Where int is: 1～999 Simplex @PJL SET DUPLEX = Where value1 = OFF (simplex) value1 &l int S Where int is one of the following: 0 = simplex Duplex @PJL SET DUPLEX = Where value1 = ON (duplex) value1 Where value2 is one of the following: @PJL SET BINDING = LONGEDGE SHORTEDGE value2 (Use value2 combined with value1 = ON) &l int S Where int is one of the following: 1 = Duplex long edge binding 2 = Duplex short edge binding Or
ページ15に含まれる内容の要旨
Feature Implementation Values Interleaving @PJL SET SLIPSHEET = Where value is one of the following: Paper value OFF = no slipsheet BLANK = blank slipsheet COPY = imaged slipsheet Where string is a maximum of 32 Accounting @PJL SET JOBATTR = characters (case sensitive) “@JOAU = string” YYYY:MM:DD:hh:mm Delay Print @PJL SET JOBATTR = YYYY = year (AD 2000～2099) “@PRTM = MM = month (1～12) YYYY:MM:DD:hh:mm” DD = day (1～31) Hh = hour (0～23) Mm = minute (0～59) PCL Template This s
ページ16に含まれる内容の要旨
Sample PCL Headers Example 1 Header for Simple Print %-12345X@PJL JOB MODE=PRINTER @PJL COMMENT Beginning PCL Job @PJL SET OUTBIN=MAINTRAY @PJL SET QTY=1 @PJL SET RESOLUTION=600 @PJL SET JOBATTR=”@JOAU=Nagaoka” @PJL ENTER LANGUAGE=PCL PCL DATA ………. %-12345X@PJL EOJ Example 2 Header for Finishing Options %-12345X@PJL JOB MODE=PRINTER @PJL COMMENT Beginning PCL Job @PJL SET OUTBIN=OUTB
ページ17に含まれる内容の要旨
Example 4 Header for Confidential Print %-12345X@PJL JOB MODE=PRINTER @PJL COMMENT Beginning PCL Job @PJL SET OUTBIN=MAINTRAY @PJL SET QTY=1 @PJL SET RESOLUTION=600 @PJL SET HOLD=STORE @PJL SET HOLDKEY="1234" @PJL SET USERNAME="Nagaoka" @PJL SET JOBNAME="Job1" @PJL ENTER LANGUAGE=PCLXL PCL DATA ………. %-12345X@PJL EOJ PCL Feature Dependencies/Caveats • All PJL commands must be in th
ページ18に含まれる内容の要旨
PCL Fonts The following PCL fonts are resident on the device. Each of the commands reference a 12-point font. If you wish to use any other point size, change the 12v to the desired size (.25 – 999.75). The commands listed use the default symbol set, Roman-8. To change the symbol set, include the alternate symbol set after the first and before the second . Use the line printer examples as a reference. Font Name PCL Escape Command Albertus Medium ((s1p12v0s1b4362T A
ページ19に含まれる内容の要旨
Font Name PCL Escape Command Univers Medium Italic ((s1p12v1s0b4148T Univers Medium Condensed ((s1p12v4s0b4148T Univers Medium Condensed Italic ((s1p12v5s0b4148T Letter Gothic ((s1p12h0s0b4102T Letter Gothic Italic ((s1p12h1s0b4102T Letter Gothic Bold ((s1p12h0s3b4102T Times Roman ((s1p12h0s3b4102T Times Italic ((s1p12h0s3b4102T Times Bold ((s1p12h0s3b4102T Times Bold Italic ((s1p12h0s3
ページ20に含まれる内容の要旨
Additional Information Xerox Customer Support welcomes feedback on all documentation - send feedback via e-mail to: USA.DSSC.Doc.Feedback@mc.usa.xerox.com. You can reach Xerox Customer Support at 1-800-821-2797 (USA), TTY 1-800-855-2880 or at http://www.xerox.com. Other Tips about Xerox multifunction devices are available at the following URL: http://www.office.xerox.com/support/dctips/dctips.html. XEROX ®, The Document Company ®, the digital X ®, and all Xerox product names are tradema
