ページ1に含まれる内容の要旨
2
User Manual
1
Quick Start Guide
MCD 289
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
STANDBY-ON
SLOW
ANGLE
DISPLAY
Remote control with two AAA
A/V cord (R/W/Y)
Stand
MUTE
batteries
FM wire antenna Quick start guide
User manual
Power adapter
AC power cord
(for main set)
(for subwoofer)
MCD289 QUG_Eng-61 1 2008.1.11, 17:30
ページ2に含まれる内容の要旨
1 Connect the speaker cables. 2 Tips Connect the FM antenna. – See the User Manual for other TV connection options. 3 –For connecting to a Progressive Scan Connect the A/V cord to a TV. TV, refer to the user manual for proper connections and detailed setup. 4 – In case of wireless connection failure Connect the power cords of the system and TV. between the main set and subwoofer, see the User Manual for manual pairing. 5 Power on both the main set and subwoofer. ➜ Wireless connection will set up
ページ3に含まれる内容の要旨
Setting the clock IMPORTANT! – To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO POWER 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press and hold CLOCK on the remote control. 2 When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote control) to set the hours. 3 Press CLOCK again and the minute digits flash. Then press VOLUME-/+ (VOL+/- on the remote) to set the minutes. 4 Pres
ページ4に含まれる内容の要旨
P r i n t Playing a disc 1 Insert a disc into the slot loader. ➜ Make sure the label side is facing you. ➜ Make sure you have removed any other disc from the slot loader. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote control) to select tuner source. 2 Press PROGRAM for more than two seconds to program all available stations in order of waveband. 3 Press PRESET ¡ / ™ until the desired
