ページ1に含まれる内容の要旨
1
Quick Start Guide
2
User Manual
MCD305
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MW antenna
Remote control with two
Composite Video Cable
FM antenna
AAA batteries
DIN OUT cable
Quick start guide User manual
MCD305 QUG_Eng-93 1 2005.11.18, 14:45
ページ2に含まれる内容の要旨
1 Connect the speaker wires. Tips 2 –A sticker indicating speaker type can Connect the subwoofer and the DVD system by using the supplied DIN be found at the back of each speaker box OUT cable. (FRONT L, FRONT R, CENTER, REAR L 3 and REAR R). Insert the speaker wires by matching the colors of the jacks and the Connect the MW and FM antennas labels on the speaker wires. – See the User Manual for other TV 4 connection options. Connect the supplied composite video cable to your TV. –For connecting
ページ3に含まれる内容の要旨
Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive s
ページ4に含まれる内容の要旨
P r Playing a disc 1 Press OPEN /CLOSEç(ç on the remote) to open the disc tray. 2 Load in a disc with the label side facing up, then close the disc door. OPEN/CLOSE 3 Playback will start automatically. If not, pressÉÅ. 4 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source (FM or MW). 2 Press PROG on the remote for more than two seconds to program all available stations in order of waveband. 3 Press PRESET3/4 (CH +/- (¡ /
