ページ1に含まれる内容の要旨
2
User Manual
1
Quick Start Guide
MCD 708
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Composite video and audio
Remote control with two
cables
Control Cable
AAA batteries
(yellow, white, red)
PRO
Quick start guide
SCART Cable
FM and MW antennas
User manual
MCD708 QUG_Eng-22 1 2006.10.27, 16:20
ページ2に含まれる内容の要旨
1 Connect the speaker cables. 2 Connect the MW and FM antennas. Tips – Refer to the User Manual for other TV 3 Connect the control cable. connection options. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the SCART cable to the TV. 5 Connect the power cords of the system and TV. S-VIDEO IN AUDIO TV IN IN VIDEO IN AC power FM antenna 5 S-VIDEO AUDIO IN TV IN IN VIDEO IN MW antenna 2 4 Speaker Speaker OOFER (right) (left) LI
ページ3に含まれる内容の要旨
Setting the clock 1 In standby mode, press and hold CLOCK/RDS on the remote control. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote control to set the hours. 3 Press CLOCK/RDS again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- on the remote control to set the minutes. 4 Press CLOCK/RDS again to confirm the time settings. Setting DVD menu options IMPORTANT! For instances whereby the progressive scan feature is activ
ページ4に含まれる内容の要旨
Playing a disc 1 Press OPEN •CLOSEç (or ç on the remote control) to open the disc tray and load disc, press the same button again to close the disc tray. 2 OPENÄCLOSE Load disc with the label side facing up. 3 Playback starts automatically. If not, pressÉÅ. 4 To stop playback, press PRESET-/9 (or 9 on the remote control). Programming and tuning to radio stations 1 Press SOURCE (or TUNER on the remote control) to select tuner source. 2 Press PROG on the remote control for more than two seconds to
