ページ1に含まれる内容の要旨
Function added in system version 2.0
E 1
ページ2に含まれる内容の要旨
RADIAS synthesizer/vocoder RADIAS operating system version 2.0 adds the following functions. Please read this document in conjunction with the “RADIAS owner’s manual” included with your RADIAS or RADIAS-R. Virtual Patch Connecting the RADIAS-R to an RADIAS version 2.0 adds the following parameters as M3 keyboard assembly virtual patch modulation destinations. This allows you RADIAS version 2.0 allows you to connect the RADIAS even greater sound-making diversity. tone module (RADIAS-R) to th
ページ3に含まれる内容の要旨
Function added in system version 2.0 If you want to use the joystick X-axis (left/right) as When you operate the joystick in the –Y direction, a modulation source for another parameter, set the control change CC#02 will be transmitted on the MIDI following parameters to P.Bend according to the channel of the timbre you’ve selected. When CC#02 is parameter that you want to control. received, the result will be the same as when you operate the joystick. • Virtual patch P11 PATCH “Source” (RADI
ページ4に含まれる内容の要旨
RADIAS synthesizer/vocoder When you operate a switch, a control change CC#80 The aftertouch sensitivity of the 73/88-key (SW1) or CC#81 (SW2) will be transmitted on the MIDI keyboard assembly cannot be adjusted on the channel of the timbre selected by TIMBRE SELECT. RADIAS-R. Switch-on will transmit a value of 127, and switch-off will transmit a value of 0. When CC#80 (SW1) or CC#81 Ribbon controller (SW2) are received, the on/off status of the switch will The ribbon controller is available
ページ5に含まれる内容の要旨
Function added in system version 2.0 Global parameters MIDI settings when using an So that you can connect the RADIAS to the 61-key/73- M3-M and RADIAS-R together key/88-key keyboard assembly used by the M3 music workstation/sampler and play the RADIAS from that MIDI OUT MIDI IN keyboard, RADIAS version 2.0 adds the following functions as choices that can be selected in “MIDI1”– “MIDI5” (☞p.117 P04–1: MIDI page “MIDI1”– M3-M RADIAS-R “MIDI5”). #016± (CC#16±) Select this if you want to use th
ページ6に含まれる内容の要旨
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan 2007 KORG INC.
