ページ1に含まれる内容の要旨
sPEcIFIcATIONs
Weight Capacity 150 lb.
For LED / LCD / Plasma TVs 37” to 61” wide
FLAT PANEL TV UNPAckINg
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing or
WALL MOUNT
broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
Model 67781
IMPOrTANT sAFETY INFOrMATION
1. Do not exceed 150 lb. max. weight capacity of
INsTrUcTIONs ANd PrEcAUTIONs
TV Bracket. Sudden load movement may briefly
create excess load causing product
ページ2に含まれる内容の要旨
a masonry wall covered with drywall/plaster, AssEMbLY ANd MOUNTINg counter bore a hole through drywall/plaster read the ENTIrE IMPOrTANT sAFETY around mounting holes’ locations. This will allow INFOrMATION section at the beginning Wall Anchors to be set directly against concrete of this document including all text under or masonry. See Figures 2a and 2b, below. subheadings therein before set up or use Wall Bracket (1) of this product. Concrete Lag NOTE: The following tools
ページ3に含まれる内容の要旨
2. WArNINg! Do no lay flat panel TV face down; 7. Tighten the two clamping screws leaving about cover its surface with a towel or other soft an eight of an inch space. See Figure 6. material and tilt it against the wall or another solid surface. 3. WArNINg! Some Flat Panel TVs are heavy; two people may be needed to lift and support the TV while it is being attached to the TV Bracket. 4. Locate the mounting holes on back of TV and select mounting Screws (3-6) that fit properl
ページ4に含まれる内容の要旨
PArTs LIsT & AssEMbLY dIAgrAM Part description Qty. 1 Wall Bracket 1 2 Support Arm 2 3 Screw (M4 x .7 x 35mm) 4 4 Screw (M5 x .8 x 35mm) 4 5 Screw (M6 x 1.0 x 35mm) 4 6 Screw (M6 x 1.25 x 35mm) 4 7 Spacer 4 8 Square Pad 4 9 Washer 4 10 Lag Bolt 4 11 Wall Anchor 4 2 1 6 3 5 4 8 10 7 9 11 record serial Number here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individual