ページ1に含まれる内容の要旨
OWNER’S MANUAL
GUIDE D’UTILISATION
32” WIDE TFT LCD TELEVISION WITH DIGITAL TUNER
TÉLÉVISEUR GRAND ÉCRAN ACL TFT DE 32 po AVEC
SYNTONISEUR NUMÉRIQUE
(32” class/31.51 diagonal)
LT-32A210
(32” classe/31.51 diagonale)
Please read the important notice for energy
efficiency on page 8.
Veuillez lire l’avis important d’efficacité
énergétique à la page 8.
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required p
ページ2に含まれる内容の要旨
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to SHOCK, DO NOT REMOVE COVER alert the user to the presence of (OR BACK). NO USER-SERVICEABLE important operating
ページ3に含まれる内容の要旨
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fa
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22) When you connect th
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to
ページ6に含まれる内容の要旨
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fi t in only one direction. Hold the unit and attach the stand slowly. Finally secure the bottom-plate with 2 screws
ページ7に含まれる内容の要旨
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. • Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be progra
ページ8に含まれる内容の要旨
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 F eatures ............................................................ 7 Power source ....................................................7 Contents ...........................................................8 Logos & Licenses .....................
ページ9に含まれる内容の要旨
Parts and functions Front Left side VOLUME +/– buttons CHANNEL / buttons MENU button INPUT/ENTER button POWER button To display the menu screen. Remote sensor Press MENU button to display the menu POWER indicator screen. CHANNEL / buttons, VOLUME Red: Standby +/– buttons and INPUT/ENTER button Green: On can be used to select the desired setting Rear during the menu screen operations. PC MONITOR IN jack VAR (VARIABLE) AUDIO OUT jacks DIGITAL AUDIO COAXIAL OUT jack RF (ANT.) IN jack HDMI 2 IN
ページ10に含まれる内容の要旨
Remote control 6.CURSOR ▲/▼/◀/▶ Buttons - Used to operate the menu functions of the LCD TV. 1 11 7.MUTING Button - To turn off the sound, press 2 12 this button once. The LCD TV will be silenced and the symbol “Muting” will appear on the screen. 3 The muting feature can be released by pressing the MUTING button again or one of the VOL (VOLUME) + or – buttons. 4 13 8.INPUT SELECT Button - Use to change the external input. 14 5 9.VOL (VOLUME) + / – Buttons - Press the + button to increase
ページ11に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. Antenna Antenna Jack Jack If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matchin
ページ12に含まれる内容の要旨
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company. For subscribers to basic Cable TV service For basic Cable TV service not requiring a Converter/ Descrambler box, connect the 75 ohm Coaxial Cable
ページ13に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV to a VCR Rear of the unit To LINE1 VCR To Video/Audio OUT VIDEO/AUDIO IN Video/Audio cord (not supplied) To connect the LCD TV to a VCR with an S-Video cord If you connect a VCR with
ページ14に含まれる内容の要旨
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit Front Speaker Subwoofer (Right) TV Front Speaker (Left) To DIGITAL AUDIO COAXIAL OUT Coaxial digital cable (not supplied)
ページ15に含まれる内容の要旨
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear of the unit To HDMI out HDMI device or To HDMI1/DVI IN To PC/DVI DVI device AUDIO IN HDMI cable (type A connector) (not supplied) To DVI
ページ16に含まれる内容の要旨
Set the Signal Type option to the appropriate Starting setup 3 position (see “Air/Cable selection” on page 19). The Auto Setup menu appears the first time you Press the Direct Channel Selection (0-9, –) 4 turn on the TV, and assists you to specify the buttons to select the channel. Air/Cable setting, and program your channels (If you press only channel number, channel selection will be delayed for a few seconds.) automatically. TO SELECT ANALOG CHANNELS IMPORTANT: Make sure that the antenna
ページ17に含まれる内容の要旨
DISPLAY Quick guide for menu Press DISPLAY to display the current information on the screen. operation When the TV receives a digital signal, the digital information will appear. Call menu and for example: Select Language. Sleep Timer 62-1 HDTV Moving Picture1 Off CH-1 TV-MA Digital Air English Press INPUT SELECT to select TV mode. 1 No Program Information is available 2 Press MENU. The TV menu screen will appear. Main Menu Full 1080i >> Picture Audio Channel • Channel number • Stati
ページ18に含まれる内容の要旨
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture Brightness / Contrast You can adjust the picture quality to your preference. Setting / Sharpness / Color / Tint Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm) 2 Backlight* The Backlight feature adjusts the screen br
ページ19に含まれる内容の要旨
The TV will begin memorizing all the channels Memorizing channels 4 available in your area. • It may take from 15 minutes to 30 minutes to This TV is equipped with a channel memory complete memorizing digital cable channels. feature which allows channels to skip up or down Depending on the reception condition, a bar to the next channel set into memory, skipping display may not advance for several minutes, over unwanted channels. Before selecting please be patient. channels, they must be
ページ20に含まれる内容の要旨
Ch Label Clear All Channel Number 15-1 Ch Label All channels are deleted from the channel memory. Label Clear >> Select “Channel”, then press ▶ or ENTER. 1 : Select : Adjust Press ▲ or ▼ to select “Add/Delete”, then press ▶ 2 or ENTER. 4 Press ◀ or ▶ repeatedly until the character you want appears in the first space. Press ▲ or ▼ to select “Clear All”, then press ▶ or 3 ENTER. Ch Label Channel Number 15-1 Add/Delete Ch Label A Adding Channel >> Label Clear >> Add/Delete >> Clear All >> : Sele
