ページ1に含まれる内容の要旨
Инструкция
LG M2432D
Перейти в карточку товара
8 800 775 98 98
ページ2に含まれる内容の要旨
ENGLISH OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating the your TV and retain it for future reference. LED LCD TV MODEL M2232D M2432D M2732D www.lg.com
ページ3に含まれる内容の要旨
ENGLISH TABLE OF CONTENTS 2 TABLE OF CONTENTS 3 LICENSES 34 USING THE USER GUIDE 34 Accessing User Guide menu. 34 - Using the TV menu 4 INSTALLATION PROCEDURE 34 - Using the Remote Control 5 ASSEMBLING AND PREPARING 35 MAINTENANCE 5 Unpacking 35 Cleaning Your TV 7 Parts and buttons 35 Screen and frame 8 Lifting and moving the TV 35 Cabinet and stand 9 Setting up the TV 35 Power cord 9 - Attaching the Stand 36 Preventing “Image burn” or “Burn-in” on 12 - Mounting on a table your TV screen 13 -
ページ4に含まれる内容の要旨
ENGLISH LICENSES 3 LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official D
ページ5に含まれる内容の要旨
ENGLISH INSTALLATION PROCEDURE 4 INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. 1 Attach the stand to the TV. 2 Connect an external device to the TV. 3 NOTE Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future.
ページ6に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. NOTE The accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
ページ7に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 6 M2232D M2432D M2732D Remote control. CD (Owner's Manual). Stand Base. Batteries (AAA). Cards. (See p.9, See p. 14) (See p.31, See p.32) (See p. 10, See p. 15) Screws for Assembly. 2 EA Stand Body. Stand Body. (Only M2732D) (Only M2232D, M2432D) (Only M2732D) (See p. 10, See p. 15) (See p.9, See p. 14) (See p. 10, See p. 15) or Power Cord. AC-DC Adapter. AC-DC Adapter. ( Depending on the country ) ( Depending on the country ) (See p.12) (See p.12) (See p.12)
ページ8に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 7 Parts and buttons Remote Control Sensor Standby Light Lighting On: Turned off Lighting Off: Turned on Touch Buttons Connection panel (See p.20) Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. / I Turns the power on or off. NOTE All of the buttons are
ページ9に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 8 When holding the TV, the screen should face Lifting and moving the TV away from you to prevent the screen from scratches. When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images. When transporting the TV, do not
ページ10に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 9 3 Attach the Stand Base from the Stand Body by Setting up the TV turning the screw to the right with a Coin. M2232D M2432D Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. Place the TV with the screen side down on a 1 flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth CAUTION on the surface to protect the screen from Tighten the screws firmly to prevent the TV da
ページ11に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 10 3 Secure the TV and the Stand Body with the M2732D 2 screws. If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 Place the TV with the screen side down on a flat and cushioned surface. WARNING If you don`t fasten the screw tightly, TV will fall down and get damaged. Attach the Stand Base from the Stand Body by 4 turning the screw to the right with a Coin. Attach the Stand Body from the TV. 2 Insert the two
ページ12に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 11 CAUTION Do not carry the monitor upside- down as this may cause it to fall off its stand, resulting in damage or injury. The illustration shows a general example of installation and may look different from the actual product. Do not carry the monitor upside- down by holding the stand body as this may cause it to fall off, resulting in damage or injury. The illustration shows a general example of installation and may look different from the actu
ページ13に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 12 2 Connect the AC-DC Adapter and Power Cord Mounting on a table to a wall outlet. 1 Lift and tilt the TV into its upright position on a table. Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm or WARNING When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers. CAUTION CAUTION Disconnect the power cord first, and then move Do no
ページ14に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 13 Using the Kensington security system NOTE Tilt from +20 to -5 degrees up or down to The Kensington security system connector is adjust the angle of the TV to suit your view. located at the back of the TV. For more information of installation and using, refer to the manual -5 +20 supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. Front Rear Tidying cable
ページ15に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 14 3 Pull out the Stand Body from the TV. Detaching the Stand M2232D M2432D Place the TV with the screen side down on a 1 flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. When detaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Turn the screw to the left, and then pull out the 2 Stand Base fr
ページ16に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 15 3 Remove 2 screws and pull out the Stand Body M2732D from the TV. 1 Place the TV with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. When detaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Turn the screw to the left, and then pull out the 2 Stand Base from the
ページ17に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 16 5 Please use VESA standard as below. Mounting on a wall 784.8 mm (30.9 inch) and under For proper ventilation, allow a clearance of 10 * Wall Mount Pad Thickness : 2.6 mm cm on each side and from the wall. Detailed * Screw : 4.0 mm x Pitch 0.7 mm x installation instructions are available from your Length 10 mm dealer, see the optional Tilt Wall Mounting Bracket 787.4 mm (31.0 inch) and above Installation and Setup Guide. * Please use
ページ18に含まれる内容の要旨
ENGLISH ASSEMBLING AND PREPARING 17 CAUTION Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do no t over tighten the screws as this may cause damage to the TV and void your warranty. Use the screws and wall mounts that meet the VESA standard. Any
ページ19に含まれる内容の要旨
ENGLISH WATCHING TV 18 WATCHING TV Turning the TV on for the first time When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. Press on the TV or power button on the remote control to turn the TV on. 2 The Standby Light is turned off. NOTE When the TV is in Power saving mode, the Standby Light turns amber. The initial setting screen appears if you access the TV for the firs
ページ20に含まれる内容の要旨
ENGLISH WATCHING TV 19 NOTE For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. When France is selected for Country, the initial password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. To display images in the best quality for your home environment, select Home Use mode . Store Demo mode is suitable for the retail environment. If you select Store Demo mode, the previously customized settin
