ページ1に含まれる内容の要旨
MITSUBISHI
ENGINE F9Q
WORKSHOP MANUAL
FOREWORD
This Workshop Manual contains procedures for
ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11A
removal, disassembly, inspection, adjustment,
reassembly and installation, etc. for service
mechanics.
All information, illustrations and product
descriptions contained in this manual are current
as at the time of publication. We, however, reserve
the right to make changes at any time without prior
notice or obligation.
FILING INSTRUCTION
ページ2に含まれる内容の要旨
INTRODUCTION EXPLANATION OF MANUAL CONTENTS Maintenance and Servicing Procedures (1) A diagram of the component parts is D Removal steps: provided near the front of each section in The part designation number corresponds order to give the reader a better under- to the number in the illustration to indicate standing of the installed condition of removal steps. D componentparts. Disassembly steps: (2) The numbers provided within the diagram The part designation number corresponds indicatethesequen
ページ3に含まれる内容の要旨
INTRODUCTION Indicates the Indicates the Indicates the Indicates the Indicates the group title. section title. group number. section number. pagenumber. Denotes tightening torque. Denotes non-reusablepart. This number corresponds to the number appearing in Removal steps, Disassembly steps, Installation steps or Reassembly steps. Operating procedures, cau- tions,etc.onremoval,instal- lation, disassembly and reassembly are described. Publication number-Revision code Issue date
ページ4に含まれる内容の要旨
LIST OF EFFECTIVE PAGES Page Revision Date Remarks Page Revision Date Remarks Code Code 11A-0-1 to 11A-0–3 Jun. 2000 11A-10-3 A Mar. 2001 Added 11A-1-1 Jun. 2000 11A-11-1 Jun. 2000 11A-1-2 and 11A-1-3 A Mar. 2001 Revised 11A-11-2 A Mar. 2001 Revised 11A-2-1 Jun. 2000 11A-11-3 Jun. 2000 11A-2-2 A Mar. 2001 Revised 11A-11-4 to 11A-11-6 A Mar. 2001 Revised 11A-2-3 A Mar. 2001 Added 11A-11-7 Jun. 2000 11A-3-1 and 11A-3-2 A Mar. 2001 Revised 11A-12-1 and 11A-12-2 A Mar. 2001 Revised 11A-4-1 to 11A-4-
