Sony Snc Df50nの取扱説明書

ページ1に含まれる内容の要旨

3-113-371-11 (1)
Bottom
Features About the Supplied Manuals C
This product is a network camera adopting the 1/3 type CCD. The camera has qf LAN port (RJ45)
Names of Manuals
the following features:
Connect to a hub or computer on the 10BASE-T or 100BASE-TX
• High sensitivity (minimum illumination: 0.7lx, F1.3)
network using a network cable (UTP, category 5).
The following manuals are supplied with this unit.
• Automatic white balance tracking and adjustment (ATW/ATW-PRO)
qg I/O (Input/Output) por

ページ2に含まれる内容の要旨

I / O 123456 I / O 123456 Connecting the I/O port M K Installation D While holding down the button on the slot to which you want to connect the wire (AWG No. 28 to 22) with a small slotted screwdriver, insert the Before Installation I / O + DC 12V – wire into the slot. Then release the screwdriver from the button. LAN 21 AC 24V 5 m 123456 Hole for the After deciding the direction in which the camera will shoot, make the Repeat this procedure to connect all required wires. connecting cables 5 3 r