ページ1に含まれる内容の要旨
OWNER’S MANUAL
DIGITAL A/V RECEIVER
SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
AR805TS (AR805TS, SR85TS-F/S/C/W)
P/NO : MFL63267063
ページ2に含まれる内容の要旨
Safety Information 2 Safety Information 1 1 Safety Information CAUTION: Do not block any ventilation openings. CAUTION Install in accordance with the manufacturer’s RISK OF ELECTRIC SHOCK instructions. DO NOT OPEN Slots and openings in the cabinet are provided for CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK ventilation and to ensure reliable operation of the DO NOT REMOVE COVER (OR BACK) NO USER- product and to protect it from over heating. The SERVICEABLE PARTS INSIDE REFER SERVICI
ページ3に含まれる内容の要旨
Safety Information Safety Information 3 This device is equipped with a portable battery or Copyrights accumulator. It is forbidden by law to copy, broadcast, show, Safety way to remove the battery or the battery broadcast via cable, play in public, or rent from the equipment: copyrighted material without permission. This 1 Remove the old battery or battery pack, follow the product features the copy protection function steps in reverse order than the assembly. To prevent developed by M
ページ4に含まれる内容の要旨
4 Contents Contents 3 Installation 12 Installing speakers 13 Connecting speakers 14 Connecting to Your TV 1 14 Video/Audio (Left/Right) Safety Information connection 15 HDMI connection 2 Cautions and Warnings 16 Resolution Setting 3 Copyrights 16 Connecting TV or components with HDMI jack 17 Connecting components with 2 analog video and audio jacks Preparation 17 AV IN 1 connection 6 Introduction 17 AV IN 2 connection 6 About the “ ” Symbol 18 Connecting components with Display Digital Audi
ページ5に含まれる内容の要旨
Contents 5 4 5 Operation Maintenance 24 Turning On the unit 37 Handling the Unit 1 24 Selecting the input source 25 Adjusting the speaker levels 6 26 Enjoying various sound mode Troubleshooting 26 Sound Effect 2 27 Bass Blast 38 Troubleshooting 27 Setting the USER EQ 27 Listening to FM/AM radio 27 Automatic tuning 7 3 27 Manual tuning Appendix 28 Presetting radio stations 40 Trademarks and Licenses 28 Tuning to preset stations 41 Specifications 28 Deleting the preset stations 4 28 Deleting a
ページ6に含まれる内容の要旨
Preparation 6 Preparation 2 Preparation Accessories 2 Introduction Please check and identify the supplied accessories. About the “” Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. FM antenna (1) AM antenna (1) Symbols Used in this Manual NOTE Indicates special notes and operating features. HDMI cable (1) Speaker cables (5) CAUTION Indicates cautions for preventing pos
ページ7に含まれる内容の要旨
Preparation Preparation 7 • USB cable Required cables The hookup diagrams on the subsequent pages assume the use of the following connection cables. You must purchase the connection cables • HDMI cable separately if necessary. • Analog audio cable 2 White (L) • Portable cable Red (R) • Composite video cable Yellow NOTE • Turn off the power to all components before • Analog audio/Composite video cable making any connections. • When connecting an audio/video cable, be Y
ページ8に含まれる内容の要旨
Preparation 8 Preparation • • • • • • • • • • • • • • • • • a Remote control POWER (1): Switches the unit ON or OFF. TV control buttons: Controls the TV. (LG TV only) -- 1- : Turns the TV on or off. - AV/INPUT : Switches the TV’s input source between the TV and other input sources. 2 INPUT buttons: Selects the input source you want to use. (Page 25) - AV: Selects the input source connected to AV IN 1/2 jack. - PORTABLE: Selects the input source connected to PORT. IN jack. - OP
ページ9に含まれる内容の要旨
Preparation Preparation 9 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • b d ./> (SKIP): Goes to the next or previous SETUP: Displays or exits the [SETUP] menu. chapter / track / file. RETURN ( ): Moves backwards in the menu O m/M (SCAN): Searches backward or or exits the setup menu. forward. INFO/DISPLAY ( ): Displays or exits On- x (STOP): Stops playback. screen Display. (Page 33, 35) N(PLAY): Starts playback. ENTER ( ): Acknowledges menu selection
ページ10に含まれる内容の要旨
Preparation 10 Preparation Front panel 2 j k l mn o p USER EQ STANDBY/ON (1/[) i a Sets the USER EQ mode (BASS, MIDDLE Switches the unit ON or OFF. and TREBLE). (Page 27) INPUT SELECTOR b ENTER Selects the input source. Rotate this knob j Acknowledges menu selection. until the input source you want appears in the display window. PLAY/PAUSE k Starts playback. Display window c Pauses playback, press it again to exit Shows the current status of the unit. pause status. Moves to t
ページ11に含まれる内容の要旨
Preparation Preparation 11 Rear panel 2 a b c d e fg hi Speakers connectors AV IN 1 (L-AUDIO-R, VIDEO) a f Connects the speaker cables. Connects the components with analog audio/video output jacks (DVD player, Blu- OPTICAL IN 1/2 b ray disc player, Satellite tuner, Set-top box, Connects other components with an etc). optical digital audio output. AUDIO L/R OUTPUT g COAXIAL IN 1/2 c Connects the components with analog Connects other components with a coaxial audio input jacks. digit
ページ12に含まれる内容の要旨
Installation 12 Installation 3 Installation Front speaker (left)/ Front speaker A B Installing speakers (right) Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. The unit allows you to use 5.2 channel system. The following illustration shows an example 3 Center speaker C of positioning the system. Note that the Place the center speaker above or below the illustrations in these instructions differ from the monitor or screen.
ページ13に含まれる内容の要旨
Installation Installation 13 2. Connect the wires to the speakers. Connect Connecting speakers the other end of each wire to the correct speaker according to the color coding: Color Speaker Position Before connecting the cables, be sure to disconnect the AC power cord. Green Center Center Orange Subwoofer Any front Speaker system connection position Red Front Front right Front speaker (R) Center speaker Front speaker (L) White Front Front left Black Red Noir Red Noir Red Grey Rear Rear righ
ページ14に含まれる内容の要旨
Installation 14 Installation Video/Audio (Left/Right) Connecting to Your TV connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can watch the selected input image when Connect the left and right AUDIO OUT jacks of you connect the VIDEO OUT or HDMI OUT jack the unit to the audio left and right IN jacks on to a TV. the TV using the audio cables. It is not necessary to connect all the cables. Connect the cables according to the jacks
ページ15に含まれる内容の要旨
Installation Installation 15 HDMI connection NOTE If you have a HDMI TV or monitor, you can • HDMI is the abbreviated name for High connect it to this unit using a HDMI cable. Definition Multimedia Interface. It is an interface Connect the HDMI OUT jack on the unit to which transmits video and audio signals in the HDMI IN jack on a HDMI compatible TV or digital format. If a connected HDMI device does monitor. not accept the audio output of the unit, the HDMI device’s audio sound may be
ページ16に含まれる内容の要旨
Installation 16 Installation Resolution Setting Connecting TV or The unit provides several output resolutions for components with HDMI OUT jack. You can change the resolution using [Setup] menu. HDMI jack 1. Press SETUP. The [Setup] menu appears. 1. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Connect the HDMI IN jack on the unit to your components with HDMI OUT jack using a HDMI cable. 3 HDMI Connection 2. Use U/u to select [Display]
ページ17に含まれる内容の要旨
Installation Installation 17 AV IN 2 connection Connecting components 1. Connect the VIDEO IN jack on the unit to with analog video and the VIDEO OUT jack on your component using a video cable. Connect the left and audio jacks right AUDIO IN jacks of the unit to the audio left and right OUT jacks on your component using the audio cables. It is not necessary to connect all the cables. Analog Video/Audio Connection Connect the cables according to the jacks of your components. Before
ページ18に含まれる内容の要旨
Installation 18 Installation Coaxial digital audio Connecting connection components with 1. Connect the COAXIAL IN 1/2 jack on the unit to your components with COAXIAL Digital Audio jacks OUT jack using a coaxial digital audio cable. COAXIAL IN connection It is not necessary to connect all the cables. Connect the cables according to the jacks of your components. Before connecting the Unit cables, be sure to disconnect the AC power cord. 3 Optical digital audio connection 1. Connec
ページ19に含まれる内容の要旨
Installation Installation 19 Connecting the Connecting the portable device antennas Connect the supplied AM loop antenna and 1. Connect the PORT. IN jack on the unit to the FM wire antenna. LINE OUT jack on your Portable device (MP3 Before connecting the antenna, be sure to player, etc...) using a portable cable ( 3.5 disconnect the AC power cord. mm). Antennas connection Portable device connection Unit 3 FM wire antenna AM loop antenna Unit Portable device NOTE (MP3 player, etc...) • T
ページ20に含まれる内容の要旨
Installation 20 Installation Connecting the headphones Connect a pair of stereo headphones ( 3.5 mm phone plug) to the unit’s PHONES jack for private listening. Headphones connection Unit 3 Headphones NOTE • Always turn down the volume before connecting your headphones. • The speakers are turned off while the headphones plug is inserted in the PHONES jack.
