ページ1に含まれる内容の要旨
Contents
Introduction ..................................... 2
5.1ch Home Theater System
Connection .................................... 20
HT-S4100
AV Receiver (TX-SR304)
Turning On & First Time Setup..... 36
Front Speakers (SKF-360F L/R)
Center Speaker (SKC-360C)
Surround Speakers (SKM-360S L/R)
Subwoofer (SKW-460)
Remote Interactive Dock (DS-A1XP)
Basic Operation
Playing your AV components....... 40
Using the Tuner............................ 42
Instruction Manual
Enjoying the Listeni
ページ2に含まれる内容の要旨
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a ri
ページ3に含まれる内容の要旨
Precautions 1. Recording Copyright—Unless it’s for personal use For U.S. models only, recording copyrighted material is illegal with- FCC Information for User out the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- The user changes or modifications not expressly serviceable. If you cannot turn on the unit, contact approved by the party responsible for compliance could your Onkyo dealer. void the user’
ページ4に含まれる内容の要旨
Speaker Precautions Precautions—Continued Placement Memory Backup • The subwoofer cabinet is made out of wood and is The AV receiver uses a battery-less memory backup therefore sensitive to extreme temperatures and system in order to retain radio presets and other settings humidity, do not put it in locations subject to direct when it’s unplugged or in the case of a power failure. sunlight or in humid places, such as near an air condi- Although no batteries are require
ページ5に含まれる内容の要旨
Features AV Receiver TX-SR304 Speaker Package HTP-460 SKF-360F L/R 2-Way Front Speakers Amplification SKC-360C 2-Way Center Speaker • 65 W/channel into 6 ohms (20 Hz–20 kHz, 0.7%, • 3-1/4" (8 cm) cone woofer FTC) • 3/4" (2 cm) ceramic tweeter • 90 W/channel into 6 ohms (1 kHz, DIN) • Max. input power:120 W • 110 W/channel into 6 ohms (JEITA) • Magnetically shielded • Optimum Gain Volume Circuitry • Color-coded speaker terminals and speaker cable • Massive High
ページ6に含まれる内容の要旨
Contents Package Contents Make sure you have the following items: Introduction Important Safety Instructions ................ 2 AV Receiver TX-SR304 Precautions ............................................. 3 Features ................................................... 5 Package Contents................................... 6 Front & Rear Panels................................ 8 Remote Controller................................. 12 Before Using the AV receiver................
ページ7に含まれる内容の要旨
Package Contents—Continued Speaker Package HTP-460 RI Dock DS-A1XP (see page 44 for package contents) Front speakers (SKF-360F L/R) Center speaker (SKC-360C) Surround speakers (SKM-360S L/R) Subwoofer (SKW-460) (Red) (White) (Green) Speaker cable for front speakers and center speaker 11 ft. (3.5 m) (Blue) (Gray) Speaker cables for surround speakers 30 ft. (9 m) 16 thin rubber stoppers, 12 thick rubber stoppers RCA cable for subwoofer connection 10 ft. (3 m) 4 floor pads for th
ページ8に含まれる内容の要旨
Front & Rear Panels Front Panel 1 2 3 4 5 6 78 9JK L M TUNING / PRESET MASTER VOLUME STANDBY/ON ENTER STANDBY A SPEAKERS B RETURN SETUP TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE CLEAR PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD N O P Q R S For detailed information, see the pages in parentheses. A STANDBY/ON button (36) L Arrow/TUNING/PRESET & ENTER buttons This button i
ページ9に含まれる内容の要旨
Front & Rear Panels—Continued Display 13 2 4 5 6 For detailed information, see the pages in parentheses. 1 A & B speaker indicators (20, 40) Indicator A lights up when speaker set A is on. Indi- cator B lights up when speaker set B is on. 2 MUTING indicator (47) This indicator flashes when the AV receiver is muted. 3 Source/listening mode indicators (50, 57) These indicators show the currently selected listen- ing mode and digital audio format. 4 Tuning indi
ページ10に含まれる内容の要旨
Front & Rear Panels—Continued Rear Panel 1 B 3 4 5 6 7 8 9 J K L M A DIGITAL IN OPTICAL 1, 2 & COAXIAL I CD IN These optical and coaxial jacks can be used to con- These analog inputs can be used to connect a CD nect a CD or DVD player and other components player with analog outputs. with digital audio outputs. J TAPE IN/OUT B COMPONENT VIDEO These analog inputs and outputs can be used to con- A DVD player, TV, or other component that sup- nec
ページ11に含まれる内容の要旨
Speakers Subwoofer (SKW-460) For detailed information, see the pages in parentheses. A STANDBY/ON indicator ■ Front Red: Subwoofer in standby mode Blue: Subwoofer on With the Auto Standby function, the SKW-460 automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-460 automatically enters Standby mode. B OUTPUT LEVEL control (40) This control is used to adjust the volume of the sub- 1 wo
ページ12に含まれる内容の要旨
Remote Controller How to Use the Remote Controller RECEIVER Mode Including the AV receiver, the remote controller can be RECEIVER mode is used to control the AV receiver. used to control up to six different components. The To set the remote controller to RECEIVER mode, remote controller has a specific operating mode for use press the [RECEIVER] REMOTE MODE button. with each type of component. Modes are selected by using the five REMOTE MODE buttons. RECEIVER ■ RECE
ページ13に含まれる内容の要旨
Remote Controller—Continued For detailed information, see the pages in parentheses. O MUTING button (47) This button is used to mute the AV receiver. A ON/STANDBY button (36) P SETUP button (38, 52, 55) This button is used to set the AV receiver to On or This button is used to access various settings. Standby. Q CINE FLTR button (53) B INPUT SELECTOR buttons (40) This button is used to set the CinemaFILTER func- These butt
ページ14に含まれる内容の要旨
Remote Controller—Continued A ON/STANDBY button DVD Mode This button sets the DVD player to On or Standby. B Number buttons To select your DVD player as the input source, press: These buttons are used to enter title, chapter, and track numbers and to enter times for locating spe- RECEIVER 6 cific points in time. DVD C DISC +/– button This button selects discs on a DVD changer. D TOP MENU button To set the remote controller to DVD mode
ページ15に含まれる内容の要旨
Remote Controller—Continued A ON/STANDBY button CD Mode This button sets the CD player to On or Standby. B Number buttons To select your CD player as the input source, press: These buttons are used to enter track numbers and to enter times for locating specific points in time. RECEIVER 9 C DISC +/– button C D This button selects discs on a CD changer. D Playback buttons From left to right: Pause, Play, Stop, Fast Reverse, To set the remote controller to C
ページ16に含まれる内容の要旨
Remote Controller—Continued A ON/STANDBY button MD, & CDR Mode This button sets the MD/CD recorder to On or Standby. To select your MiniDisc or CD recorder as the input B Number buttons source, press: These buttons are used to enter track numbers and to enter times for locating specific points in time. RECEIVER MD or CD recorder 7 The [+10] button is used to enter numbers above 10. TAPE C Playback buttons From left to right: Pause, Play, Stop, Fast Rever
ページ17に含まれる内容の要旨
Remote Controller—Continued A ON/STANDBY button HDD Mode This button sets the iPod to On or Standby. HDD mode is for controlling an Apple iPod in the DS- B ALBUM +/– button A1XP RI Dock that’s connected via . This button selects the next or previous album on an iPod. To select the DS-A1XP RI Dock that’s connected C PLAYLIST [ ]/[ ] buttons via as the input source, press: These buttons select the previous or next playlist on the iPod. RECEIVER or
ページ18に含まれる内容の要旨
Remote Controller—Continued A Play [ ] button TAPE Mode This button is used to start playback. B Stop [ ] button To select your Cassette deck as the input source, This button is used to stop playback. press: C Reverse Play [ ] button RECEIVER 7 This button is used to start reverse playback. TAPE D Rewind & FF [ ]/[ ] buttons The Rewind [ ] button is used to start rewind. The FF [ ] button is used to start fast forward. TAPE mode is used to control an Onkyo cassette
ページ19に含まれる内容の要旨
Before Using the AV receiver Installing the Batteries Using the Remote Controller To use the remote controller, point it at the AV receiver’s To open the battery compartment, press remote control sensor, as shown below. 1 the small hollow and slide open the cover. Remote control sensor AV receiver STANDBY indicator Approx. 16 ft. Insert the two supplied batteries (AA/R6) (5 m) 2 in accordance with the polarity diagram inside the battery compartment. Notes: • The remot
ページ20に含まれる内容の要旨
Enjoying Home Theater Speaker Sets A and B You can use two sets of speakers with the AV receiver: speaker set A and speaker set B. Speaker set A should be used in your main listening room for up to 5.1-channel playback. *While speaker set B is on, speaker set A is reduced to 2.1-channel playback. Speaker set B can be used in another room and offers 2-channel stereo playback. Speaker set A Speaker set B Indicator Output AV receiver Remote Set A: 2.1 channels On A SPEAK
