ページ1に含まれる内容の要旨
User Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
USER GUIDE Contents Overview ............................................................................................................. 2 Getting Started .................................................................................................... 2 Unpacking TekCharge MP2250 ...................................................................... 2 Getting to Know TekCharge MP2250 .............................................................. 3 Using TekCharge MP2250 ................
ページ4に含まれる内容の要旨
Overview ™ TekCharge MP2250 is a rechargeable power source to charge and power your CradlePoint portable router (model numbers CTR500, PHS300 and CTR350). The package includes brackets designed specifically for mounting the battery to one of these routers, and the adapter tip for connecting to the router’s power jack. To charge TekCharge MP2250, you will use the CradlePoint power adapter (5V, 2.5A - 3.0A). This lightweight battery also can be used to charge other 5V devices. In that case,
ページ5に含まれる内容の要旨
Getting to Know TekCharge MP2250 Capacity Display Button Capacity Indicator Indicates the battery capacity of the rechargeable battery DC OUT 5V DC IN 5V For connection For connection to to the router router power adapter Power/Charging Indicator USER GUIDE 3
ページ6に含まれる内容の要旨
Using TekCharge MP2250 Charging TekCharge MP2250 1. Plug the CradlePoint power adapter into the DC IN 5V adapter jack. While TekCharge MP2250 is charging the charging lamp will be red, turning to green when more than 80% charged. 2. When the battery is fully charged, unplug the power adapter. Connecting TekCharge MP2250 to Your CradlePoint Router 1. Place the CradlePoint router on top of TekCharge MP2250. 2. Slide one of the provided brackets onto each end to hold the CradlePoint router batter
ページ7に含まれる内容の要旨
Viewing the Battery Capacity 1. Press the Capacity Display Button. The capacity indicators on the top of the unit will light up to indicate the remaining battery capacity as follows: 1st Green LED 1-15% 2nd Green LED 15-40% 3rd Green LED 40-70% 4th Green LED 70-100% Charging/Powering Other Devices You can use TekCharge MP2250 to power and charge any portable device that requires 5V input or devices with a center positive DC jack. (If your device has a center negative DC jack, do not power the
ページ8に含まれる内容の要旨
Troubleshooting If TekCharge MP2250 does not power your router or other 5V device, take these steps: 1. Verify that the TekCharge battery is charged. 2. Check that the input/output cord is connected to both TekCharge and the router or other 5V device. 3. If connecting TekCharge to another portable device with a DC jack, ensure that the adapter tip fits snugly into the power jack and that the polarity of the device power jack is center positive. If the polarity is center negative, do not powe
ページ9に含まれる内容の要旨
Limited Warranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period Tekkeon, Inc. will replace the defective product when the owner returns all product contents. The limited warranty will be considered void if the unit is tampered with, subject to misuse, negligence or accidental damage, has been improperly serviced, or if the security seal is removed.
ページ10に含まれる内容の要旨
Customer Support Customer support for TekCharge is available at: Tekkeon, Inc. c/o TekCharge MP2250 3002 Dow Avenue, #134 Tustin, CA 92780 888-787-5888 / 714-832-1266 www.tekkeon.com Tekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds. 8
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
www.tekkeon.com © 2009 Tekkeon, Inc. All Rights Reserved. TekCharge is a trademark of Tekkeon, Inc. CradlePoint is a trademark of CradlePoint, Inc. in the U.S. and other countries.
