ページ1に含まれる内容の要旨
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS
Installation and service must be performed by a qualified installer.
IMPORTANT: Save for local electrical inspector's use.
Read and Save these instructions for future reference.
The electrical requirements for this oven are 120 volts, 15 amps.
NOTE
I G
1. Base must be capable of supporting 150 pounds (68.0
kg) for the Microwave Wall Oven only.
23 ½"
(59.8 cm)
A
2. Make sure base is level and front of cabinet is square. If
C
C L
the cabinet base
ページ2に含まれる内容の要旨
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS IMPORTANT NOTES TO IMPORTANT SAFETY THE INSTALLER INSTRUCTIONS 1. Read all instructions contained in these installation instructions before installing the Microwave Wall Oven. This oven can be built into a cabinet or wall by itself or Never use your appliance for warming or heating above any electric wall oven or warming drawer. the room. Prolonged use of the oven without adequate ventilation can be dangerous. 2. Remove all packing material fro
ページ3に含まれる内容の要旨
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS MICROWAVE WALL OVEN INSTALLATION ANTI-TIP BRACkET INSTALLATION Cutout Width (See dimensions below) Two persons are required to install the oven. Never hold the door handle when moving the oven. 3. Place the oven adjacent to the opening on a table or stand. Plug the power supply cord into the electrical Anti-Tip Brackets Cutout Height outlet. Carefully guide the oven into the prepared 21" (53.3 cm) Min.* opening. Avoid pinching cord between oven an
ページ4に含まれる内容の要旨
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS Model and Serial Number Location Before You Call for Service The serial plate is located on the oven front frame. See Refer to the warranty in your Use & Care Guide for our Figure 6. toll-free service number and address. Please call or write if you have inquiries about your product and/or need to When ordering parts for or making inquires about your order parts. oven, always be sure to include the model and serial numbers and a lot number or let
