ページ1に含まれる内容の要旨
1. Introduction
Quick Install Guide
Compex 54Mbps
Wireless LAN USB
Adapter
WLU54G
The Compex iWavePort WLU54G is a handy card-sized 54Mbps
Ordering Information: WLU54G 2a
Wireless Adapter with USB (Universal Serial Bus) interface,
compliant with the USB 2.0 and the IEEE 802.11g industry
standards. It offers the convenience of a plug and play device so that
you can just simply connect it to a USB interface on your PC or
Version 1.2
notebook.
2. Drive
ページ2に含まれる内容の要旨
4. Click Finish to complete the utility installation. At the same time, 7. RT2500 USB Wireless LAN Card will appear in the Network your system had installed the driver to your PC/notebook. Adapters section. This indicates that the drivers for Compex WLU54G has successfully installed to your system! To confirm if the driver had successfully installed to your system, 5. Proceed to your desktop, right click on My Computer and select Properties. 8. To activate the utility pr
ページ3に含まれる内容の要旨
3. Un-install Compex WLU54G 4. Remove USB Adapter from the System Please note that you need to close all programs before uninstalling If you wish to remove your USB adapter from your system, your Compex WLU54G. 1. Go to the system tray, right click on Safely Remove Hardware 1. From your Start menu, go to Programs, Ralink Wireless, icon, and select Safely Remove Hardware. USB and select UnInstall. 2. Select RT2500 USB Wireless LAN Card and click on the Stop button. 2
ページ4に含まれる内容の要旨
Disclaimer: Compex, Inc. provides this guide without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Compex, Inc. may make improvements and/or changes to the product and/or specifications of the product described in this guide, without prior notice. Compex, Inc will not be liable for any technical inaccuracies or typographical errors found in this guide. Changes are periodical