ページ1に含まれる内容の要旨
OWNER’S MANUAL
Network 3D Blu-ray Disc™
Player
Please read this manual carefully before operating
your set and retain it for future reference.
BD670
P/NO : SAC35095305
www.lg.com
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Getting Started 1 Getting Started Getting Started 3 Safety Information CAUTION CAUTION: This product employs a Laser System. 1 RISK OF ELECTRIC SHOCK To ensure proper use of this product, please read DO NOT OPEN this owner’s manual carefully and retain it for future CAUTION: TO REDUCE THE RISK OF ELECTRIC reference. Shall the unit require maintenance, SHOCK DO NOT REMOVE COVER (OR BACK) NO contact an authorized service center. USER-SERVICEABLE PARTS INSIDE REFER SERVICING Use of controls
ページ4に含まれる内容の要旨
Getting Started 4 Getting Started This device is equipped with a portable battery or Connect the equipment into an outlet on a y accumulator. circuit different from that to which the receiver is connected. Safety way to remove the battery or the battery from the equipment: Remove the y Consult the dealer or an experienced radio/TV 1 old battery or battery pack, follow the steps technician for help. in reverse order than the assembly. To prevent CAUTION: Any changes or modifications not co
ページ5に含まれる内容の要旨
Getting Started Getting Started 5 Notes on Copyrights IMPORTANT SAFETY y Because AACS (Advanced Access Content System) is approved as content protection INSTRUCTIONS system for BD format, similar to use of CSS 1. Read these instructions. 1 (Content Scramble System) for DVD format, 2. Keep these instructions. certain restrictions are imposed on playback, analog signal output, etc., of AACS protected 3. Heed all warnings. contents. The operation of this product and 4. Follow all instructio
ページ6に含まれる内容の要旨
6 Table of Contents 3 System Setting Table of Contents 26 Settings 26 – Adjust the Setup Settings 26 – [DISPLAY] Menu 1 Getting Started 28 – [LANGUAGE] Menu 28 – [AUDIO] Menu 3 Safety Information 30 – [LOCK] Menu 8 Introduction 31 – [NETWORK] Menu 8 – Playable Discs and symbols used in 32 – [OTHERS] Menu this manual 9 – About the “7” Symbol Display 10 – File requirement 4 Operating 11 – AVCHD (Advanced Video Codec High 33 General Playback Definition) 33 – Using [HOME] menu 11 – About DLNA 33
ページ7に含まれる内容の要旨
Table of Contents 7 44 – Changing the TV Aspect Ratio 44 – Changing subtitle code page 45 – Changing the Picture Mode 45 Audio CD Recording 1 47 Viewing information from Gracenote Media Database 48 Using the Premium 48 Using the LG Apps 49 – Signing in 2 49 – Managing my Apps 5 Troubleshooting 50 Troubleshooting 3 50 – General 51 – Network 52 – Picture 52 – Customer Support 52 – Open source software notice 4 6 Appendix 53 Controlling a TV with the Supplied Remote Control 5 53 – Setting up th
ページ8に含まれる内容の要旨
Getting Started 8 Getting Started Introduction 1 Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. e y “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. BD-R/RE discs that are recorded in BDAV format. y Blu-ray y BD-R/RE discs that contain Video, Audio or y Photo files. u y ISO 9660+JOLIET, UDF and UDF Bridge format i Discs such as movies that can be purchased or y rented. r Video mode and finalized on
ページ9に含まれる内容の要旨
Getting Started Getting Started 9 Note , About the “7” Symbol Display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the 1 specific media. unit. Depending on the recording software & the y finalization, some recorded discs (CD-R/RW, DVD±R/RW,
ページ10に含まれる内容の要旨
Getting Started 10 Getting Started File requirement Video files 1 File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx DTS, MP3, SubStation Alpha (.ssa/.txt), “.mkv”, “.mp4”, (standard playback WMA, AAC, MicroDVD (.sub/.txt), VobSub Disc, “.asf”, “.wmv”, only), XVID, MPEG1 SS, AC3 (.sub), SubViewer 1.0 (.sub), USB “.m4v” (DRM H.264/MPEG-4 AVC, SubViewer 2
ページ11に含まれる内容の要旨
Getting Started Getting Started 11 Note , AVCHD (Advanced Video y The file name is limited to 180 characters. Codec High Definition) y Maximum files/Folder: Less than 2000 (total y This player can playback AVCHD format discs. number of files and folders) These discs are normally recorded and used in 1 y Depending on the size and number of the camcorders. files, it may take several minutes to read the The AVCHD format is a high definition digital y contents on the media. video camera f
ページ12に含まれる内容の要旨
Getting Started 12 Getting Started Certain System Requirements Regional Code For high definition video playback: This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD High definition display that has COMPONENT or y discs labeled same as the rear of the unit or “ALL”. HDMI input jacks. 1 BD-ROM disc with high definition content. y Compatibility Notes y HDMI or HDCP capable DVI input on your display device is required for some content (as specif
ページ13に含まれる内容の要旨
Getting Started Getting Started 13 Remote control • • • • • • a • • • • • • TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s pop-up 1 (POWER): Switches the player 1 menu, if available. ON or OFF. DISC MENU: Accesses menu on a B (OPEN/CLOSE): Opens and disc. closes the disc tray. 0-9 numerical buttons: Selects • • • • • • d • • • • • numbered options in a menu or Colored (R, G, Y, B) buttons: inputs letters in the keypad menu. Use to navigate BD-ROM menus. CLEAR: Removes
ページ14に含まれる内容の要旨
Getting Started 14 Getting Started Front panel 1 a Disc Tray f Z (STOP) b Remote Sensor g 1 (POWER) Button Display Window USB Port c h d B (OPEN/CLOSE) e N (PLAY / PAUSE) Rear panel a AC power cord e VIDEO OUT b LAN port f 2CH AUDIO OUT (Left/Right) c HDMI OUT g COMPONENT VIDEO OUT (Y P P ) B R d DIGITAL AUDIO OUT (OPTICAL)
ページ15に含まれる内容の要旨
Connecting 2 Connecting Connecting 15 HDMI Connection Connecting to Your TV If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Make one of the following connections, depending Speed HDMI™ Cable). Connect the HDMI jack on on the capabilities of your existing equipment. the player to the HDMI jack on a HDMI compatible y HDMI connection (page 15) TV or monitor. Component Video connection (page 16) y y Video connection (page 17) Note Rear of th
ページ16に含まれる内容の要旨
Connecting 16 Connecting Note , Component Video Connection If a connected HDMI device does not accept y Connect the COMPONENT VIDEO OUT jacks on the the audio output of the player, the HDMI player to the corresponding input jacks on the TV device’s audio sound may be distorted or using component video cable. Connect the left and may not output. right AUDIO OUT jacks of the player to the audio y When you use HDMI connection, you can left and right IN jacks on the TV using the audio cha
ページ17に含まれる内容の要旨
Connecting Connecting 17 Video/Audio (Left/Right) Resolution Setting Connection The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You Connect the VIDEO OUT jack on the player to the can change the resolution using [Setup] menu. video in jack on the TV using a video cable. Connect 1. Press HOME ( ). n the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the 2. Use A/D to select the [Setup] and press a
ページ18に含まれる内容の要旨
Connecting 18 Connecting Connecting to an Amplifier via Connecting to an HDMI Output Amplifier Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a Make one of the following connections, depending HDMI cable. on the capabilities of your existing equipment. y HDMI Audio connection (page 18) Digital Audio connection (page 19) y Rear of the unit y 2CH Analog Audio connection (page 19) 2 Since many factors affect the type of audio output, see “Audio Outp
ページ19に含まれる内容の要旨
Connecting Connecting 19 Connecting to an Amplifier via Connecting to an Amplifier via Digital Audio Output 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT jack Connect the Left and Right 2CH AUDIO OUT jacks to the corresponding in jack (OPTICAL) on your on the player to the audio left and right in jacks amplifier using an optional digital audio cable. on your amplifier, receiver, or stereo system using audio cables. Rear of the unit Rear of the unit 2 Optical Audio cable ca
ページ20に含まれる内容の要旨
Connecting 20 Connecting Connecting to your Broadband Home Network service This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as 2 software updates, BD-Live interactivity and on-line content services. Router Wired network connection Using a wired network provides the best performance, because the attached devices connect direc
