ページ1に含まれる内容の要旨
OWNER’S MANUAL
Blu-ray Disc™/DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP120
P/NO : MFLxxxxxxxxxxx
ページ2に含まれる内容の要旨
1 Getting Started
ページ3に含まれる内容の要旨
Getting Started Getting Started 3 Safety Information CAUTION CAUTION : CLASS 1M VISIBLE AND INVISIBLE LASER 1 RISK OF ELECTRIC SHOCK RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY DO NOT OPEN WITH OPTICAL INSTRUMENTS CAUTION: TO REDUCE THE RISK OF ELECTRIC Use of controls, adjustments or the performance of SHOCK DO NOT REMOVE COVER (OR BACK) NO procedures other than those specified herein may USER-SERVICEABLE PARTS INSIDE REFER SERVICING result in hazardous radiation exposure. TO QUALIFIED
ページ4に含まれる内容の要旨
Getting Started 4 Getting Started This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the 1 old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries
ページ5に含まれる内容の要旨
Getting Started Getting Started 5 Notes on Copyrights Important Notice for TV colour system y Because AACS (Advanced Access Content System) is approved as content protection The colour system of this player differs according to system for Blu-ray Disc format, similar to use of currently playing discs. 1 CSS (Content Scramble System) for DVD format, For example, when the player plays the disc certain restrictions are imposed on playback, recorded in the NTSC colour system, the image is a
ページ6に含まれる内容の要旨
6 Table of Contents 4 Operating Table of Contents 26 General Playback 26 – Using [HOME] menu 26 – Playing a Disc 1 Getting Started 26 – Playing a file on disc/USB device 27 – Basic operations for video and audio 3 Safety Information content 8 Introduction 27 – Basic operations for photo content 8 – Playable Discs and symbols used in 27 – Using the disc menu this manual 28 – Resume playback 9 – About the “7” Symbol Display 28 – Last Scene Memory 9 – Compatibility Notes 28 Advanced Playback 10
ページ7に含まれる内容の要旨
Table of Contents 7 5 Troubleshooting 36 Troubleshooting 36 – General 37 – Picture 1 37 – Customer Support 37 – Open source software notice 6 Appendix 2 38 Controlling a TV with the Supplied Remote Control 38 – Setting up the remote to control your TV 3 39 Area Code List 40 Language code List 41 Trademarks and Licenses 43 Audio Output Specifications 45 Specifications 4 46 Maintenance 46 – Handling the Unit 46 – Notes on Discs 5 6
ページ8に含まれる内容の要旨
Getting Started 8 Getting Started Introduction 1 Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. e y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Movie, Music or y Photo files. u y ISO 9660+JOLIET, UDF and UDF Bridge format i y Discs such as movies that can be purchased or rented. r Movie mode and finalized only y DVD-ROM y Supports the dual layer disc also DVD
ページ9に含まれる内容の要旨
Getting Started Getting Started 9 Note , About the “7” Symbol Display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the 1 specific media. unit. Depending on the recording software & the y finalization, some recorded discs (CD-R/RW, Compatibili
ページ10に含まれる内容の要旨
Getting Started 10 Getting Started File requirement Movie files 1 File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx DTS, MP3, AAC, SubStation Alpha (.ssa/.txt), “.mkv”, “.mp4”, (standard playback AC3 MicroDVD (.sub/.txt), VobSub Disc, “.asf ”, “.wmv”, only), XVID, MPEG1 SS, (.sub), SubViewer 1.0 (.sub), USB “.m4v” (DRM H.264/MPEG-4 AVC, SubViewer 2.0 (
ページ11に含まれる内容の要旨
Getting Started Getting Started 11 Note Note , , y The file name is limited to 180 characters. y A “avi” file which is encoded “WMV 9 codec” is not supported. y Maximum files/Folder: Less than 2000 (total number of files and folders) y This player supports UTF-8 files even if it 1 contains Unicode subtitle contents. This y Depending on the size and number of the player can not support the pure Unicode files, it may take several minutes to read the subtitle files. contents on the media.
ページ12に含まれる内容の要旨
Getting Started 12 Getting Started Certain System Requirements Regional Code For high definition video playback: This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD High definition display that has HDMI input jack. y discs labelled same as the rear of the unit or “ALL”. 1 y BD-ROM disc with high definition content. y HDMI or HDCP capable DVI input on your display System Select device is required for some content (as specified by disc authors)
ページ13に含まれる内容の要旨
Getting Started Getting Started 13 Remote control • • • • • • a • • • • • • • • • • • • d • • • • • 1 (POWER): Switches the player REPEAT (h): Repeats a desired 1 ON or OFF. section or sequence. B (OPEN/CLOSE): Opens and AUDIO ([): Selects an audio closes the disc tray. language. 0-9 numerical buttons: Selects SUBTITLE (]): Selects a subtitle numbered options in a menu. language. CLEAR: Removes a mark on the TITLE/POP-UP: Displays the DVD search menu or a number when title menu o
ページ14に含まれる内容の要旨
Getting Started 14 Getting Started Front panel 1 a Disc Tray e N (PLAY / PAUSE) b Display Window f Z (STOP) Remote Sensor (POWER) c g 1 d B (OPEN/CLOSE) h USB Port Rear panel a AC power cord c DIGITAL AUDIO OUT (COAXIAL) b HDMI OUT
ページ15に含まれる内容の要旨
Connecting 2 Connecting Connecting 15 Additional Information for HDMI Connecting to Your TV y When you connect a HDMI or DVI compatible device make sure of the following: HDMI Connection - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI If you have a HDMI TV or monitor, you can connect device and leave it for around 30 seconds, it to this player using a HDMI cable (Type A, High then switch on this player. Speed HDMI™ Cable). Connect the HDMI jack on the
ページ16に含まれる内容の要旨
Connecting 16 Connecting What is SIMPLINK? Resolution Setting The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. Some functions of this unit can be controlled 1. Press HOME ( ). n by the TV’s remote control when this unit and a compatible LG TV with SIMPLINK are connected 2. Use a/d to select the [Setup] and press ENTER through HDMI connection. ( ). The [Setup] menu appears. b Controllable functions by LG TV’s remote control;
ページ17に含まれる内容の要旨
Connecting Connecting 17 Note , Connecting to an y If your TV does not accept the resolution you have set on the player, you can set Amplifier resolution to 576p as follows: 1. Press B to open the disc tray. Make one of the following connections, depending 2 Press Z (STOP) for more than 5 seconds. on the capabilities of your existing equipment. When you set the resolution to 576i with y y HDMI Audio connection (page 18) HDMI connection, actual resolution is Digital Audio connection (pag
ページ18に含まれる内容の要旨
Connecting 18 Connecting Connecting to an Amplifier via Connecting to an Amplifier via HDMI Output Digital Audio Output Connect the player’s HDMI OUT jack to the Connect the player’s DIGITAL AUDIO OUT jack corresponding in jack on your amplifier using a to the corresponding in jack (COAXIAL) on your HDMI cable. amplifier using an optional digital audio cable. Rear of the unit Rear of the unit 2 Coaxial cable HDMI cable Receiver/Amplifier HDMI cable Receiver/Amplifier TV You will need to acti
ページ19に含まれる内容の要旨
Connecting Connecting 19 Note , USB device connection y This player supports USB flash drive/external HDD formatted in FAT16, FAT32 and NTFS This player can play movie, music and photo files when accessing files (music, photo, movie). contained in the USB device. However, for Blu-ray contents, only FAT16 and FAT32 formats are supported. Use the USB flash drive/external HDD formatted in Playback content in the USB either FAT16 or FAT32 when enjoying Blu-ray device contents. 1. Insert a
ページ20に含まれる内容の要旨
System Setting 3 System Setting 20 System Setting Adjust the Setup Settings Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (n). Initial Setup When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language on the initial setup wizard. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use a/d to select the [Setup] and press ENTER 2. Use w/s/a/d to select a display language ( )
