ページ1に含まれる内容の要旨
CID-948 Jumbo Caller ID with 50 Memory
OWNER’S MANUAL — Please read before using this equipment.
Note: You must not connect your system to:
WARNING: To reduce the risk of fire or
shock hazard, do not expose this product to rain
• coin-operated systems
or moisture.
CAUTION
• party-line systems
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
• most electronic key telephone systems
CAUTION: TO REDUCE THE RISK OF
In the unlikely event that your system causes problems on the phone
ELECTRIC SHOCK, DO NOT REMO
ページ2に含まれる内容の要旨
Connecting to an Answering Machine MAKING THE CONNECTIONS The system connects to any modular phone jack and your phone. You can also connect it to an answering machine. Connecting to a Single-Line Phone 1. Disconnect the phone line cord from the phone and plug it into the system’s LINE jack. LINE Jack 2. Plug one end of the supplied line cord into the system’s PHONE PHONE Jack jack. Answering Machine’s Jack 3. Plug the other end of the cord into the phone’s jack. 1. Disconnect the phone line co
ページ3に含まれる内容の要旨
3. Thread a screw through each hole, letting the head Viewing Call Information 1 extend /8 inch from the wall. The caller ID displays the following information. 4. Attach the mounting bracket to the system (see 1 “Attaching the Mounting Bracket” on Page 2). /8 Inch Display Description 5. Route the phone line cords and AC adapter cord through the NEW Appears during an incoming slots on the back of the bracket. call and flashes when there is a new call that has not 6. Line up the keyhole slots
ページ4に含まれる内容の要旨
ID is not performing as it should, take it to your local RadioShack CARE store for assistance. If the trouble is affecting the telephone lines, To enjoy your RadioShack Jumbo Caller ID for a long time: the phone company can ask you to disconnect your until caller ID you have resolved the problem. • Keep the caller ID dry. If it gets wet, wipe it dry immediately. • Use and store the caller ID only in normal temperature environ- LIGHTNING ments. Your telephone has built-in protection circuits to
