ページ1に含まれる内容の要旨
GR-D250US.book Page 1 Friday, March 11, 2005 10:45 AM
Dear Customer,
Thank you for purchasing this digital
video camera. Before use, please
read the safety information and
precautions contained in the pages
3 – 4 and 9 to ensure safe use of this
product.
ENGLISH
DIGITAL VIDEO CAMERA
GETTING STARTED 6
GR-D250
VIDEO RECORDING &
PLAYBACK
17
Please visit our Homepage on the World Wide Web for
Digital Video Camera:
http://www.jvc.co.jp/english/cyber/
ADVANCED FEATURES 22
For Accessories:
ht
ページ2に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 2 Wednesday, November 24, 2004 6:13 PM 2 EN Major Features of this Camcorder Wipe/Fader Effects Backlight Compensation You can use the Wipe/Fader Effects to make Simply pressing the BACK LIGHT button pro-style scene transitions. ( pg. 33) brightens the image darkened by backlight. ( pg. 31) Fade in ● You can also select a spot metering area so that more precise exposure compensation is available. ( pg. 31, Spot Exposure Control) Fade out Program A
ページ3に含まれる内容の要旨
MasterPage: Start_Right GR-D250US.book Page 3 Wednesday, November 24, 2004 6:13 PM EN 3 SAFETY PRECAUTIONS NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the CAUTION back of the main unit. RISK OF ELECTRIC SHOCK ● The rating information and safety caution of the DO NOT OPEN AC Adapter are on its upper and lower sides. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). This product has a fluorescent lamp tha
ページ4に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 4 Wednesday, November 24, 2004 6:13 PM 4 EN IMPORTANT SAFETY INSTRUCTIONS When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on 1. Read these instructions. all sides to allow for ventilation (10 cm (3–15/16") 2. Keep these instructions. or more on both sides, on top and at the rear). 3. Heed all warnings. Do not block the ventilation holes. 4. Follow all instructions. (If the ventilation holes are blocked
ページ5に含まれる内容の要旨
MasterPage: TOC_Heading0_Right GR-D250US.book Page 5 Wednesday, November 24, 2004 6:13 PM CONTENTS EN 5 GETTING STARTED 6 ADVANCED FEATURES 22 Index................................................................. 6 MENUS FOR DETAILED ADJUSTMENT.................. 22 Provided Accessories ..................................... 10 Changing The Menu Settings ......................... 22 Power.............................................................. 11 Recording Menus..........................
ページ6に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 6 Wednesday, November 24, 2004 6:13 PM GETTING STARTED 6 EN Index 1 BCDE T R S O 6 N P 78 Y Z a UW IK J QVLX bc M d
ページ7に含まれる内容の要旨
MasterPage: Start_Right GR-D250US.book Page 7 Wednesday, November 24, 2004 6:13 PM GETTING STARTED EN 7 Controls Other Parts A Stop Button [8] ( pg. 20) R Monitor Latch ( pg. 18) Backlight Compensation Button [BACK S LCD Monitor ( pg. 18, 19) LIGHT] ( pg. 31) T Viewfinder ( pg. 15) B Play/Pause Button [4/9] ( pg. 20) U Battery Pack Mount ( pg. 12) Manual Focus Button [FOCUS] ( pg. 29) V Shoulder Strap Eyelet ( pg. 11) C Rewind Button [3] ( pg. 20) W Speaker ( pg. 20) Menu select Bu
ページ8に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 8 Wednesday, November 24, 2004 6:13 PM GETTING STARTED 8 EN U Brightness Control Indicator (LCD monitor/ LCD Monitor/Viewfinder Indications Viewfinder) ( pg. 15) During Video Recording V Manual Focus Adjustment Indicator ( pg. 29) 90 qwe r t W Time Code ( pg. 26, 27) 1h40m 1 25 x W T 2 REC y 3 u 4 i 5 BRIGHT 50m 6 SOUND 12BIT o 7 NO V 10 '05 15:55 1 0: 00 AM 8 d s a p a Operation Mode ( pg. 13) B : Night-Alive Indicator ( p
ページ9に含まれる内容の要旨
MasterPage: Start_Right GR-D250US_04Start.fm Page 9 Monday, March 14, 2005 8:33 PM GETTING STARTED EN 9 During Video Playback Before Using This Camcorder 1 2 34 Make sure you only use cassettes with the Mini DV mark . 12BI T / M I X This camcorder is designed exclusively for the L digital video cassette. Only cassettes marked “ ” can be used with this unit. BLANK SEARCH Remember that this camcorder is not PUSH "STOP" BUTTON compatible with other digital video formats. TO C
ページ10に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 10 Wednesday, November 24, 2004 6:13 PM GETTING STARTED 10 EN How To Attach The Lens Cap Provided Accessories To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. NOTE: OR To confirm the lens cap is on correctly make sure the cap is flush to the camcorder. Place here during shooting. a AC Adapter AP-V16U or AP-V14U b Battery Pack BN-VF707U c Audio/Video Cable (ø3.5 mini-plug to RCA plug) d Shoulder Strap
ページ11に含まれる内容の要旨
MasterPage: Start_Right GR-D250US_04Start.fm Page 11 Monday, March 14, 2005 8:33 PM GETTING STARTED EN 11 How To Attach The Shoulder Strap Power Follow the illustration. This camcorder’s 2-way power supply system 1 Thread the strap through the eyelet. lets you choose the most appropriate source of power. Do not use provided power supply units 2 Fold it back and thread it through the strap with other equipment. guide and the buckle. ● To adjust the length of the strap, loosen and then Cha
ページ12に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 12 Friday, March 11, 2005 10:45 AM GETTING STARTED 12 EN To detach the battery pack Using The Battery Pack Slide the battery pack upward while pressing Perform steps 2 – 3 in “Charging The Battery PUSH BATT. to detach it. Pack”. Battery pack Charging time Maximum continuous recording time BN-VF707U* Approx. 1 hr. 30 min. LCD monitor Battery pack Viewfinder on BN-VF714U Approx. 2 hr. 40 min. on BN-VF733U Approx. 5 hr. 40 min. BN-VF707U* 1 hr. 5 min. 1 h
ページ13に含まれる内容の要旨
MasterPage: Start_Right GR-D250US.book Page 13 Wednesday, November 24, 2004 6:13 PM GETTING STARTED EN 13 Using AC Power Operation Mode Perform step 4 in “Charging The Battery Pack”. To turn on the camcorder, set the Power Switch NOTE: to any operation mode except “OFF” while The provided AC Adapter features automatic pressing down the Lock Button located on the voltage selection in the AC range from 110 V to switch. 240 V. Power Switch MENU/DATA About Batteries Lock Button DANGER! Do n
ページ14に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 14 Wednesday, November 24, 2004 6:13 PM GETTING STARTED 14 EN Power-Linked Operation Date/Time Settings When the Power Switch is set to “A” or “M”, you The date/time is recorded onto the tape at all can also turn on/off the camcorder by opening/ times, but its display can be turned on or off closing the LCD monitor or pulling out/pushing in during playback. ( pg. 22, 27) the viewfinder. 1 Perform steps 1 –4 in “Language Settings” INFORMATION: on the
ページ15に含まれる内容の要旨
MasterPage: Start_Right GR-D250US.book Page 15 Friday, March 11, 2005 10:45 AM GETTING STARTED EN 15 Viewfinder Adjustment Brightness Adjustment Of The Display 1 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the 1 Set the Power Switch + switch. to “M” or “PLAY” while – 2 Make sure the LCD monitor is closed and pressing down the Lock locked. Pull out the viewfinder fully and adjust it Button located on the manually for best viewability. switch. 3 T
ページ16に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 16 Wednesday, November 24, 2004 6:13 PM GETTING STARTED 16 EN NOTES: Loading/Unloading A Cassette ● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover The camcorder needs to be powered up to load and try again. If the cassette holder still does not or eject a cassette. open, turn the camcorder off then on again. Cassette holder Cassette holder ● If the tape does not load properly, open the cover PUSH HE
ページ17に含まれる内容の要旨
VIDEO RECORDING & PLAYBACK MasterPage: Video_Heading0_Right GR-D250US.book Page 17 Wednesday, November 24, 2004 6:13 PM VIDEO RECORDING EN 17 Tape Remaining Time Basic Recording Approximate tape remaining time appears on the display. NOTE: Before continuing, perform the procedures listed “–h––m” means the below: camcorder is calculating the ● Power ( pg. 11) remaining time. When the ● Loading A Cassette ( pg. 16) remaining time reaches 2 minutes, the indication starts blinking. Power
ページ18に含まれる内容の要旨
MasterPage: Left GR-D250US.book Page 18 Wednesday, November 24, 2004 6:13 PM VIDEO RECORDING 18 EN LCD Monitor And Viewfinder Zooming While using the LCD monitor: Produces the zoom in/out effect, or an Make sure the viewfinder is pushed back in. Pull instantaneous change in image magnification. on the end of the LCD monitor and open the Zoom In LCD monitor fully. It can rotate 270° (90° Slide the Power Zoom Lever towards “T”. downward, 180° upward). Zoom Out While using the viewfinder: Sl
ページ19に含まれる内容の要旨
MasterPage: Start_Right GR-D250US.book Page 19 Wednesday, November 24, 2004 6:13 PM VIDEO RECORDING EN 19 Journalistic Shooting NOTES: ● The time code cannot be reset. In some situations, ● During fast-forwarding and rewinding, the time different shooting code indication does not move smoothly. angles may provide ● The time code is displayed only when “TIME more dramatic results. CODE” is set to “ON”. ( pg. 26) Hold the camcorder in the desired position Quick Review and tilt the LCD
ページ20に含まれる内容の要旨
MasterPage: Left GR-D250US_05Video.fm Page 20 Wednesday, December 1, 2004 9:52 AM VIDEO PLAYBACK 20 EN ● During playback, press and hold 5 or 3. The Normal Playback search continues as long as you hold the button. Once you release the button, normal playback 5 VOL. +/– resumes. 3 ● A slight mosaic effect appears on the display Lock Button 4/9 during Shuttle Search. This is not a malfunction. 8 ATTENTION: M A Speaker During Shuttle Search, parts of the picture may not be clearly visible,
