ページ1に含まれる内容の要旨 
                    
                        ENGLISH ESPAÑOL
INSTRUCTIONS
EN SP
MANUAL DE INSTRUCCIONES
HARD DISK CAMCORDER
VIDEOCÁMARA CON DISCO DURO
Dear Customer
U
GZ-MG365
Thank you for purchasing this hard 
disk camera. Before use, please read 
U
GZ-MG335
the safety information and precautions 
contained in pages 2 and 3 to ensure 
U
GZ-MG330 safe use of this product.
For Future Reference: 
Enter the Model No. (located on the 
bottom of the camera) and Serial No. 
(located on the battery pack mount of 
the camera) below.
Model No.
Ser
                    
                    ページ2に含まれる内容の要旨 
                    
                         Safety Precautions When the equipment is installed in a cabinet or on  CAUTION a shelf, make sure that it has suffi cient space on  RISK OF ELECTRIC SHOCK DO NOT OPEN all sides to allow for ventilation (10 cm (3-15/16 ")  or more on both sides, on top and at the rear). CAUTION:      TO REDUCE THE RISK OF ELECTRIC SHOCK, Do not block the ventilation holes.        DO NOT REMOVE COVER (OR BACK). (If the ventilation holes are blocked by a  NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFI
                    
                    ページ3に含まれる内容の要旨 
                    
                        ENGLISH IMPORTANT SAFETY INSTRUCTIONS Remember that this camera is intended for  private consumer use only. 1. Read these instructions. Any commercial use without proper permission  2. Keep these instructions. is prohibited. (Even if you record an event such  3. Heed all warnings. as a show, performance or exhibition for personal  4. Follow all instructions. enjoyment, it is strongly recommended that you  5. Do not use this apparatus near water. obtain permission beforehand.) 6. Clean only with 
                    
                    ページ4に含まれる内容の要旨 
                    
                        Easy Start Guide Preparation 1   Attach the battery   Open the lens   Open the LCD monitor The camera turns on  pack cover automatically. Charge the Battery Pack.  ( pg. 14) BATT. Video recording 2   Select  (video) mode   Select recording (REC) mode [5h56m] SELECT PLAY/REC Playing back 3   Select  (video) mode   Select playback (PLAY) mode  to display thumbnails on the  screen SELECT PLAY/REC 4                                                                                                     
                    
                    ページ5に含まれる内容の要旨 
                    
                        ENGLISH CAUTION: Touch the sensors with your fi nger. The sensors do not function if you touch  them with your fi nger nail or with gloves on.   When [SET DATE/TIME!] appears,   Set the date and time ( pg. 14) select [YES] within 10 seconds. SET DATE/TIME! DATE TIME JAN 31 2007 11 07 AM YES NO ( pg. 6)  Press the START/STOP button to start recording   Select the desired fi le using the touch sensor. And then  touch the OK button to start playback  To stop playback � Select  . 5                   
                    
                    ページ6に含まれる内容の要旨 
                    
                        NOTE How to Select an Item Using the  The cursor moves from 1 to 9 on the index  Touch Sensor screen when you slide your fi nger on the  An example screen in English is used for the  touch sensor. guidance below. 12 1 2 3 3  Selecting an item from the menu list (on the menu screen) 445 5 6 6 MENU 778 8 9 9 IMAGE QUALITY IMAGE SIZE  GAIN UP BASIC SETTINGS CAUTION Touch the sensors with your fi nger. The  sensors do not function if you touch them with   your fi nger nail or with gloves on.   Slide yo
                    
                    ページ7に含まれる内容の要旨 
                    
                        ENGLISH Make a backup of important recorded data JVC will not be responsible for any lost data. It is recommended to copy your important  recorded data to a DVD or other recording media for storage. ( pg. 22) Make a trial recording Before the actual recording of important data, make a trial recording and play back the  recorded data to check that the video and sound have been recorded correctly. Reset the camera if it does not operate correctly This camera uses a microcomputer. Factors such as 
                    
                    ページ8に含まれる内容の要旨 
                    
                         Contents GETTING STARTED PC OPERATION ®  Accessories ............................................ 9 File Backup on a Windows PC ........... 23 How to Use the Everio Dock ..........................9 System Requirements .................................23 Index ...................................................... 10 Software Installation ....................................24 Indications on LCD Monitor ................. 12 Connecting the Camera to the PC ...............25 Necessary Settings bef
                    
                    ページ9に含まれる内容の要旨 
                    
                        ENGLISH  GETTING STARTED  Accessories Everio Dock* AC Adapter Battery Pack Audio/Video Cable CU-VC4U ( below) AP-V18U/14U BN-VF808U USB Cable Shoulder Strap CD-ROM Remote Control Unit ( pg. 22, 25 and 30) ( pg. 15) ( pg. 24, 28) RM-V751U ( pg. 15) NOTE Lithium Battery Core Filter Make sure to use the provided cables for  CR2025 connections. Do not use any other cables. Pre-installed in the  remote control unit. How to Use the  Everio Dock* You can connect cables to the connectors of the Eve
                    
                    ページ10に含まれる内容の要旨 
                    
                          Index NOTES   The LCD monitor can rotate 270°. �   Power-linked operation �  You can also turn the camera on/off by  opening/closing the LCD monitor during the  recording mode.  Be careful not to cover  ,  ,  and   � during shooting. 10                                                                                                                                                                                                                                                                      
                    
                    ページ11に含まれる内容の要旨 
                    
                        ENGLISH Camera Remote Control  Touch Sensor ( pg. 6)  Infrared Beam Transmitting Window  OK (DISP) Button [OK/DISP] ( pg. 13)  ZOOM (T/W) Buttons  Menu Button [MENU] Zoom In/Out  Power Switch [POWER]  Up Button (You can turn off the camera by pressing Rotate Button (counterclockwise)  and holding this button.) ( pg. 18)  Speaker  Skip Backward Button  Playback/Recording Mode Switching  Left Button Button [SELECT PLAY/REC] ( pg. 16)  Back Button  Access/Charge Lamp [ACCESS/CHARGE]  PLAYLIST B
                    
                    ページ12に含まれる内容の要旨 
                    
                         Indications on LCD Monitor During both Video and Still Image During Video Recording Only Recording [5h56m] 0:04:01 1/250  Mode Indicator JAN. 20. 2007  4:55PM  Counter   Picture Quality:  (ULTRA FINE),    Selected Operation Mode Indicator  (FINE),  (NORMAL),  (ECONOMY)  : Auto Mode  Remaining Time ( pg. 16, 37)  : Manual Mode   REC: (Appears during recording.)   Effect Mode Indicator ( pg. 16)   Tele Macro Mode Indicator  : (Appears during record-standby   LED Light Indicator mode.)  Program 
                    
                    ページ13に含まれる内容の要旨 
                    
                        ENGLISH During Video Playback During Still Image Playback 9:55:01 X-60  101-0098  JAN. 20. 2007  4:55PM JAN. 20. 2007  4:55PM  Mode Indicator ( pg. 18)  Mode Indicator ( pg. 18)  Effect Mode Indicator  Effect Mode Indicator  Wipe/Fader Effect Indicator  Folder/File Number   : Playlist Playback Indicator (Appears  Slide Show Playback Indicator ( pg. 18) when playing back a playlist.)  Selected Medium Indicator  : Event Search Playback Indicator  Drop Detection Indicator (Appears when  (Appears
                    
                    ページ14に含まれる内容の要旨 
                    
                         Necessary Settings before Use NOTES  Charging the Battery Pack  You can also use the camera with just the  � AC adapter.  Please do not pull or bend the AC adapter  � 1 Close the LCD monitor to turn off the  plug and cable. This may damage the AC  camera. adapter. 2 Attach the  battery pack.    Date/Time Setting  Slide the battery pack down until it locks  in place. Bottom of the Camera 1 Open the LCD monitor to turn on the  camera. BATT. 2 When [SET DATE/TIME!] appears,  select [YES] within 10
                    
                    ページ15に含まれる内容の要旨 
                    
                        ENGLISH Other Settings Attaching the Shoulder Strap Buckle Strap Guide Eyelet  Chec king the Remaining Battery  Preparing the Remote Contr ol Power A battery is included inside the remote control at  the time of purchase. Preparation: Remove the insulation sheet before use.  Attach the battery pack. �  Press the SELECT PLAY/REC button to  � Beam Effective Area select recording mode. Remote Sensor For  mode:  Press the INFO button twice or the INFO  button and then select .  For  mode: Press the 
                    
                    ページ16に含まれる内容の要旨 
                    
                        RECORDING Recording Files  Video Recording Preparation: Open the LCD monitor to turn on the camera.  Slide the mode switch to select Press the SELECT PLAY/REC   (video) mode. button to select recording mode. SELECT PLAY/REC Press the START/STOP button to  start recording. [5h56m] REC Approximate remaining time for  recording appears.  To stop recording  To change the aspect ratio of the image  Press the START/STOP button again. (16:9/4:3)  To view the video you just recorded Change the settings 
                    
                    ページ17に含まれる内容の要旨 
                    
                        ENGLISH  Still Image Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select Press the SELECT PLAY/REC   (still image) mode. button to select recording mode. SELECT PLAY/REC Press and hold the SNAPSHOT  button halfway. 640 [ FINE The  indicator becomes green when  the captured image is focused.  To view the image you just recorded Press the SNAPSHOT button fully  Select  after shooting. to take the photo/picture. During the preview, you can delete the  
                    
                    ページ18に含まれる内容の要旨 
                    
                        Playing Back Files 3 Select the desired fi le. Video/Still Image Playback VIDEO PLAYBACK 1 Slide the mode switch to select   (video) or  (still image) mode.  To watch on TV  See page 19. 2 To check the fi le information Press the SELECT PLAY/REC button  Press the INFO button when playback is  to select playback mode. paused.  To adjust the sound volume of videos SELECT PLAY/REC Turn down the Turn up the  volume volume The index screen for videos appears.   Operations during Video Playback   Operat
                    
                    ページ19に含まれる内容の要旨 
                    
                        ENGLISH  Watching Images on TV Preparation:  Set [SWITCH TO ANALOG I/O] to [OUTPUT] from the MENU. (Factory-preset = [OUTPUT])* �  Turn off all units. � *  This does not apply to the GZ-MG330 model. AV Jack DC Jack AV Cable To AC Outlet AV Input Jack AC Adapter NOTES  You can also connect the cables using the Everio dock connectors. The S-Video cable  � (optional) enables even higher playback quality. ( pg. 9) When other devices such as a DVD  burner are connected to the Everio dock, turn the p
                    
                    ページ20に含まれる内容の要旨 
                    
                        EDITING/COPYING Managing Files CAUTION Deleting/Protecting the Currently  Do not remove the recording medium or  Displayed File perform any other operation (such as turning  off the power) while accessing fi les. Also, After performing steps 1-2 be sure to use the provided AC adapter, as  the data on the recording medium may be  3 Select [CURRENT]. corrupted if the battery becomes exhausted  DELETE during operation. If the data on the recording  CURRENT medium becomes corrupted, format the  FILE