ページ11に含まれる内容の要旨
● Auto Start The scanner is equipped with an auto start function, which enables scanning to be automatically started when a document placed in the feeder is detected. ● Sleep Mode The scanner is designed to save energy by entering the sleep mode when it is not scanning documents. Hint Some functions may not be available depending on the software you are using. 7
ページ12に含まれる内容の要旨
Names and Functions of Parts This section describes the name and function of each part. Make sure ■ Back View to read this section and familiarize yourself with the parts of the Power Switch USB Connector scanner before using the scanner. This switch is used to turn Connect a USB cable that the scanner ON and OFF. If supports Hi-Speed USB ■ Front View/Right-Side View you set the switch to 2.0 to this connector. [AUTO], the scanner is Document Feed Job Buttons linked to be automatically Tray
ページ13に含まれる内容の要旨
Documents The scanner can scan documents ranging in size from business cards � Scanning the following types of documents can cause a paper jam and checks to LTR/A4. The document sizes that this scanner can scan or malfunction. To scan such a document, make a photocopy of the are shown below. document and then scan the photocopy. Plain Paper Wrinkled or creased Carbon paper Size documents Width: 1.97" to 8.5" (50 mm to 216 mm) Length: 2.12" to 14.02" (53.9 mm to 356mm)* Curled documents Coated
ページ14に含まれる内容の要旨
Placing Documents 1 Open the document feed tray. 3 Place the document. Insert the document into the feeder with the reverse side facing you, and the top of the document facing down. Shift the pages of a document stack slightly, so that the leading edge of the first page enters the scanner first. Insert the document with the reverse side facing you � Open the document eject tray when you want to stack output documents. You can also perform scanning without opening the Slide the document gui
ページ15に含まれる内容の要旨
Placing Cards IMPORTANT When placing cards that are thicker than standard documents, be sure � Before you place a document, check to make sure it does not to perform the following. contain paper clips, staples, or other small metal objects. These ● Set the feed selection lever to (Bypass). items may cause a fire or electrical shock, damage the document, or cause a paper jam or scanner malfunction. � Do not wear loose clothing or jewelry that may get caught in the scanner while you are usin
ページ16に含まれる内容の要旨
Supplied Software Use the following software supplied with the scanner to scan Scanner Driver documents. Select which software to use based on your intended When you install the supplied software using the Setup disc, the purpose. scanner driver is installed with CaptureOnTouch. The driver can be opened from TWAIN-compatible applications (e.g. the Mac OS X CaptureOnTouch standard application, Image Capture) for use in scanning operations. This scanning application, designed specifically fo
ページ17に含まれる内容の要旨
Scanning with CaptureOnTouch Select Scan Job What is CaptureOnTouch? CaptureOnTouch is a scanning application that allows you to scan documents using easy-to-follow on-screen instructions. Save to folder Print Save to a specified folder. Print to a specified printer. (Network) Send to application Open scanned images with a specified application. DR-2510M/DR-2010M This method allows you to register scanning conditions and output methods as jobs, and then select a job that matches your intende
ページ18に含まれる内容の要旨
Quitting CaptureOnTouch Starting CaptureOnTouch Click (CaptureOnTouch) of the menu bar, and click [Exit] in the CaptureOnTouch resides on your system when you start up your menu. computer, and a CaptureOnTouch icon appears on the menu bar (default). When you double-click (CaptureOnTouch), CaptureOnTouch starts and the main screen appears. The application no longer resides on the system, and the menu icon disappears. Hint If you end CaptureOnTouch, scanning cannot be started by pressing a
ページ19に含まれる内容の要旨
Scan First 3 Click [Scanner setting] to display the [Scanner setting] dialog box, and configure the scanner settings. Operation Flow Scan document ▼ Select output method ▼ Configure output settings ▼ Output scanned images 1 Place the document in the scanner (See p. 10). For details on scanner setting items, refer to the Help. When you are finished configuring, click the [OK] button to close 2 Click the [Scan First] tab. the [Scanner setting] dialog box. 4 Click the [Start] button. The main scr
ページ20に含まれる内容の要旨
The name of the output button differs depending on the selected 5 Specify the output method. output method. If you select [Save to folder] for the output method, for example, the output button appears as [Save]. The completion screen appears after the scanned images are output. This completes [Scan First] scanning. 6 Configure settings for the output method, and click the output button to output the scanned images. Hint � Click [Return to main screen] to return to the main screen of [Scan F
ページ1に含まれる内容の要旨
Reference Guide (Mac OS X)
♦ Please read this manual before operating this scanner.
♦ After you finish reading this manual, store it in a safe place for
future reference.
ページ2に含まれる内容の要旨
2. BACK-UP COPY: You may make one copy of the THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR READ CAREFULLY BEFORE OPENING SOFTWARE solely for a back-up purpose or copy the EXCLUSIVE REMEDY IN CONNECTION WITH THE THE SEALED DISK PACKAGE SOFTWARE onto the permanent storage device (e.g. a hard SOFTWARE AND ACCOMPANYING DOCUMENTATION. disk) of your computer and retain the original for a back-up CANON SOFTWARE LICENSE 5. TERM: This Agreement is effective upon opening the purpose. Except as exp
ページ3に含まれる内容の要旨
Please read first. Setup Guide Installing the Feed Roller Although this manual uses the DR-2510M in the descriptions, DR-2010M operations are identical. If you are using the DR-2010M, please read Slide the document guides to the left Lift the roller fixing lever a, and slide it to the left b. “DR-2010M” in place of “DR-2510M.” and right, and open the roller cover. 1 2 Document Roller fixing lever guides • Items included in this manual are subject to change Checking the Accessories without noti
ページ4に含まれる内容の要旨
Installing the Software Connecting to a Computer POWER Before Installation Connectors ● Do not connect the scanner to the computer before installing the software. ● Close all other applications before installing the software. Power switch ● When using CaptureOnTouch with a Windows driver, refer to the Reference Guide (Windows) and User Manual that are stored on the Setup disc as PDF files. Insert the Setup Disc into the computer’s CD-ROM drive. Click [DR-2510M Installer]. 1 2 Turning the Scanne
ページ5に含まれる内容の要旨
® ■ International ENERGY STAR Office Equipment Program ® As an ENERGY STAR Partner, Canon Electronics Inc. has Table of Contents ® determined that this machine meets the ENERGY STAR Setup Guide...............................................................Foldout Program guidelines for energy efficiency. ® The International ENERGY STAR Office Equipment Program is Introduction..........................................................................2 an international program that promotes energ
ページ6に含まれる内容の要旨
Introduction Thank you for purchasing the Canon DR-2010M/DR-2510M Document Scanner. Please read this manual thoroughly before using Manuals for the Scanner the scanner to familiarize yourself with its capabilities, and to make the Documentation for this scanner consists of the following manuals. most of its many functions. After reading this manual, store it in a safe Please read these manuals thoroughly before using the scanner to place for future reference. familiarize yourself with its c
ページ7に含まれる内容の要旨
Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the ● Avoid exposing the scanner to rapid changes in temperature. If the safety warnings and precautions described below. room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. Installation Location ● The following conditions are recommended for optimal scanning The p
ページ8に含まれる内容の要旨
■ Clean the scanner using a slightly dampened cloth which has been Moving the Scanner well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances. ● When moving the scanner, always hold it with both hands to avoid ■ If the scanner makes strange noises, or gives off smoke, heat, or dropping it. The scanner weighs approximately 5.3 lb (2.4 kg). strange odors, or the scanner does not function or other ● Make sure to disconnect the interface cable and AC adapter
ページ9に含まれる内容の要旨
■ Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.) to spill into the scanner, as this may result in a fire or electric shock. ■ Turn OFF the power switch for safety when not using the scanner for a long period of time, such as overnight. Also, turn OFF the power switch, and disconnect the power cord from the power outlet for safety when the machine will not be used for an extended period of time, such as during consecutive holidays. ■ Do not wear loose clo
ページ10に含まれる内容の要旨
Features of the DR-2010M/DR-2510M Document Scanner The main features of the DR-2010M/DR-2510M document scanner ● Auto Color Detection are described below. The scanner detects whether the scanned document is in color or ● Compact Size black and white, and saves the image accordingly. The dimensions of the scanner are as follows: 11.7" (298 mm)(W) ● Folio Scan x 9.8" (245 mm)(H) x 19.5" (490 mm)(D) (with the feed tray and You can scan folded documents. The scanner will scan both sides eject tray
