ページ1に含まれる内容の要旨 
                    
                           
  
 
36 IR LED  
Day/Night Bullet Camera 
Manual  
 
 
 
 
 
EV-1146-N6SQ 420 TV Lines 
EV-1646-N6SQ 540 TV Lines 
 
1
 / ” Sony Color CCD 
3 Weatherproof (IP66) construction 
 6mm lens  
 Concealed wiring for added security 
 53° viewing angle 
 Split glass design eliminates IR 
 Up to 100’ (30m) range reflection. 
 
 
 
 
 
 
Note:  Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.                                                        
                    
                    ページ2に含まれる内容の要旨 
                    
                         SECO-LARM 36 IR LED Day/Night Bullet Cameras    Specifications:     EV-1146-N6SQ EV-1646-N6SQ  Type IR bullet camera  1 CCD /3” Sony Super HAD    Resolution 420 TV lines 540 TV lines  Pickup elements 510x492 pixels 768x494 pixels   Sync Internal  Video output 1.0Vp-p composite video, 75Ω  Video output format NTSC     Lens size 6mm  Viewing angle 53°  0.05-lux (with LEDs off) 0.02-lux (with LEDs off)  Minimum illumination  0-lux (with LEDs on) 0-lux (with LEDs on)  Gamma correction 0.45  S/N rat
                    
                    ページ3に含まれる内容の要旨 
                    
                        SECO-LARM 36 IR LED Day/Night Bullet Cameras    Overview:  Adjustment screw  Adjustment ring    Adjustment screw    Sunshield  Adjustment screw      Female BNC   connector  Important:    Do not cut DC jack or female  IR LEDs  BNC connector as warranty  will be voided.  Mounting screw    Camera base  Important:  Do not remove label or open case as warranty will be voided.  DC jack   DC plug with  terminal block    Before Starting:  1. Please read this manual carefully and keep it for 6. Do not op
                    
                    ページ4に含まれる内容の要旨 
                    
                         SECO-LARM 36 IR LED Day/Night Bullet Cameras    Troubleshooting:   Check that the camera is powered up.   Check that the power supply’s polarity is correct.  The screen is blank.  Check that the monitor is powered up.   Check that the video cable connecting the camera to the  monitor is connected properly.   Clean the lens using a soft, clean cloth.  The screen image is dim   Check that the light source is adequate.   Adjust the monitor’s contrast knob.  The screen image has poor contrast.   Ch