ページ1に含まれる内容の要旨 
                    
                           
  
Mid-Size Vandal Dome Camera 
 
Manual 
 
 
(3.6mm model shown) 
 
Model No. Resolution Lens Size # of IR LEDs 
 
NTSC 
EV-2166-N3WQ 420 TV lines 3.6mm 18 
EV-2166-NV  WQ 420 TV lines 4~9mm 21 
EV-2766-N3WQ 540 TV lines 3.6mm 18 
EV-2766-NV  WQ 540 TV lines 4~9mm 21 
 
PAL 
EV-2166-P3WQ 420 TV lines 3.6mm 18 
EV-2166-PV  WQ 420 TV lines 4~9mm 21 
EV-2766-P3WQ 540 TV lines 3.6mm 18 
EV-2766-NV  WQ 540 TV lines 4~9mm 21 
 
Note:  Products with model numbers that end with “Q” or that have a r
                    
                    ページ2に含まれる内容の要旨 
                    
                        SECO-LARM Mid-Size Vandal Dome Cameras     Specifications:  NTSC 2166-N3WQ 2166-NV  WQ 2766-N3WQ 2766-NV  WQ      PAL 2166-P3WQ 2166-PV  WQ 2766-P3WQ 2766-PV  WQ  Type Mid Size Vandal Dome  1   CCD /3” Sony Super HAD II  Resolution 420 TV lines 540 TV lines  Lens 3.6mm 4~9mm 3.6mm 4~9mm    # of IR LEDs 18 (850nm) 21 (850nm) 18 (850nm) 21 (850nm)  IR range 65ft (20m) 80ft (25m) 65ft (20m) 80ft (25m)     Pickup NTSC 510x492 pixels 768x494 pixels  elements  PAL               500x528   pixels       
                    
                    ページ3に含まれる内容の要旨 
                    
                        SECO-LARM Mid-Size Vandal Dome Cameras     Overview:   Models ending in    NVWQ or PVWQ only.    Focus  Zoom    Camera  Set screw    Dome cover   Female BNC connector  Wiring notch  DC plug with  terminal block      DC jack Important:  Do not cut the DC jack or    the female BNC connector  Mounting base  as this will void the  Mounting screw  warranty.    Before Starting:     1. Please read this manual carefully and keep it for future 5. Do not drop the camera or subject it to strong  reference.
                    
                    ページ4に含まれる内容の要旨 
                    
                        SECO-LARM Mid-Size Vandal Dome Cameras     Troubleshooting:   Check that the camera is powered up.   Check that the power supply’s polarity is correct.  The screen is blank.  Check that the monitor is powered up.   Check that the video cable connecting the camera to the  monitor is connected properly.   Clean the lens using a soft, clean cloth.  The screen image is dim   Check that the light source is adequate.   Adjust the monitor’s contrast knob.  The screen image has poor contrast.   Change t