ページ1に含まれる内容の要旨
Hi Res ECL Buffer DIP Switch Settings
Verify that the Hi Res ECL Buffer internal DIP Switch settings are correct for
your system application. To open the plastic housing, insert the flat blade of a
User's Guide
screw-driver, or similar object, into the slot recess at either end of the enclosure
and gently pry the halves apart. Once opened, orient the assembly so that the
internal DIP switches match the orientation in the diagram below. Use the
diagram and the table beneath it to verify or change
ページ2に含まれる内容の要旨
Hi Res ECL Buffer Operation and Installation Hi Res ECL Buffer Operation and Installation Hi Res ECL Buffer Operation Installation Instructions The Extron Hi Res ECL Buffer is for use when interfacing high resolution ECL Prior to installing the Hi Res ECL Buffer, verify its internal DIP switch settings signals from graphic workstations or PC's to a compatible graphics projector or using the procedure on the back page. monitor. The buffer is used in combination with any one of the RGB interfaces
