ページ1に含まれる内容の要旨
D-Link™ DGS-1008D
8-Port 10/100/1000Mbps
Gigabit Ethernet Switch
Manual
Rev. 2.01
Building Networks for People
RECYCLABLE
ページ2に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch ____________________ Information in this document is subject to change without notice. © 2003 D-Link Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporat
ページ3に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch INTRODUCTION..................................................................................................................................................1 ETHERNET TECHNOLOGY......................................................................................................................................1 Fast Ethernet Technology .......................................................................................................
ページ4に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Preface The DGS-1008D User’s Guide is divided into sections that describe the system installation and operating instructions with examples. Section 1, Introduction - A description of the physical features of the switch, including LED indicators, ports and panel descriptions. Section 2, Installation – A description of the physical installation of the switch including connecting the switch to the network and connecting stacked switch group
ページ5に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( ) is used to indicate cautions and precautions that you need to review and follow. Safety Cautions To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following precautions. Obser
ページ6に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Safety Instructions (continued) • Use only approved power cable(s). If you have not been provided with a power cable for your system or for any AC-powered option intended for your system, purchase a power cable that is approved for use in your country. The power cable must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cable should be greater t
ページ7に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Safety Instructions (continued) Always load the rack from the bottom up, and load the heaviest item in the rack first. Make sure that the rack is level and stable before extending a component from the rack. Use caution when pressing the component rail release latches and sliding a component into or out of a rack; the slide rails can pinch your fingers. After a component is inserted into the rack, carefully extend the rail into a locking po
ページ8に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch SECTION 1 Introduction Ethernet Technology Switch Description Features Ports Front-Panel Components Ethernet Technology Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies are proposed to provide greater bandwidth and improve client/server response times. Among them, Fast
ページ9に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch with any other segments (ports). This allows the total network capacity to be multiplied, while still maintaining the same network cabling and adapter cards. For Fast Ethernet or Gigabit Ethernet networks, a switch is an effective way of eliminating problems of chaining hubs beyond the “two-repeater limit.” A switch can be used to split parts of the network into different collision domains, for example, making it possible to expand your Fas
ページ10に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Front-Panel Components The front panel of the Switch consists of LED indicators, 8(10/100/1000 Mbps) Ethernet ports. Figure 1-1. Front Panel View of the switch Comprehensive LED indicators display the status of the switch and the network. LED Indicators The LED indicators of the Switch include Power, 100/1000Mbps and Link/Act. The following shows the LED indicators for the Switch along with an explanation of each indicator. Fig
ページ11に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch The Cable Diagnostic first scans the eight Ethernet ports to determine if the Ethernet cable is in good working order. This process is indicated by the Speed LED blinking green for each of the eight ports − sequentially. The initial port scan takes about 10 seconds. If a cable fault is detected, it is indicated by the corresponding port’s Speed LED glowing amber for 5 seconds − after the initial port scan. The Switch is then reset for norm
ページ12に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Rear Panel Description DC Power Jack: Power is supplied through an external AC power adapter. Check the technical specification section for information about the AC power input voltage. Figure 1-2. Rear panel view of the Switch 1000BASE-T Ports: Eight (8) Gigabit Ethernet, Auto-Negotiating ports (10/100/1000Mbps) Comprehensive LED indicators display the conditions of the Switch and status of the network.
ページ13に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch SECTION 2 Installation Package Contents Before You Connect to the Network Installing the Switch Power On Package Contents Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: • 1. One DGS-1008D 8-Port 1000BASE-T Gigabit Ethernet Switch • 2. Four rubber feet with adhesive backing • 3. One external power adapter • 4. This manual • 5. Wall-mounting Kit I
ページ14に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Mounting the Switch on a Wall The DGS-1008D can also be mounted on a wall. Two mounting slots are provided on the bottom of the switch for this purpose. Please make sure that the front panel is exposed in order to view the LEDs. Please refer to the illustration below: A.) Mounting on a cement wall 1. Mount the Nylon screw anchors into a cement wall. 2. Drive the T3 x 15L screws into the Nylon screw anchors. 3. Hook the mounting holes of
ページ15に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Provide for Adequate Ventilation CAUTION: Do not place any device on top of Switch, or place the Switch on top of any device or object that will block the free flow of air through the ventilation slots on the sides, top, and bottom of the Switch’s case. In addition, care should be taken not to locate the Switch next to, on top of, or underneath any device that generates a significant amount of heat. For the Switch to perform
ページ16に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Section 3 Connecting The Switch Switch To End Node Switch To Hub or Switch Connecting To a Server NOTE: All 8 high-performance NWay Ethernet ports can support both MDI-II and MDI-X connections. Switch To End Node End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ-45 Ethernet/Fast Ethernet Network Interface Card (NIC) and most routers. An end node can be connected to the Switch via a twisted-pair Category 3, 4, or
ページ17に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Switch to Hub or Switch These connections can be accomplished in a number of ways using a normal cable • A 10BASE-T hub or switch can be connected to the Switch via a twisted-pair Category 3, 4, 5, or 5e UTP/STP cable. • A 100BASE-TX hub or switch can be connected to the Switch via a twisted -pair Category 5 UTP/STP cable. • A 1000BASE-T switch can be connected to the Switch via a twisted -pair Category 5e UTP/STP cable. Figure 3
ページ18に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Appendix A Technical Specifications General Standards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA/CD Data Transfer Ethernet: 10Mbps (Half-duplex) Rate: 20Mbps (Full-duplex) Fast Ethernet: 100Mbps (Half-duplex) 200Mbps (Full-duplex) Gigabit 2000Mbps (Full-duplex) Ethernet: Topology: Star Network Ethernet: 2-pair UTP Cat. 3,4,5, Unshield Cables: Twisted Pair (UTP
ページ19に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch Glossary 1000BASE-LX a short laser wavelength on multimode fiber optic cable for a maximum length of 550 meters 1000BASE-SX a long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 100BASE-FX 100Mbps Ethernet implementation over fiber. 100BASE-TX 100Mbps Ethernet implementation over Category 5 and Type 1 Twisted Pair cabling. 10BASE-T The IEEE 802.3 specification for Ethernet over Unshielded Twisted P
ページ20に含まれる内容の要旨
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch IP address Internet Protocol address. A unique identifier for a device attached to a network using TCP/IP. The address is written as four octets separated with full-stops (periods), and is made up of a network section, an optional subnet section and a host section. IPX Internetwork Packet Exchange. A protocol allowing communication in a NetWare network. LAN Local Area Network. A network of connected computing resources (such as PCs, printer
