ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Table of Contents For call waiting service users . . . . . 41 Introduction Temporary tone dialing . . . . . . . . . . 42 Accessory information . . . . . . . . . . . . . . 5 Phonebook Expanding your phone . . . . . . . . . . . . . . 6 Important safety instructions . . . . . . . . . 7 Using the Phonebook . . . . . . . . . . . . . . 43 For best performance . . . . . . . . . . . . . . . 9 Storing names and numbers in the System capabilities. . . . . . . . . . . . . . . . 10 Phonebook . . . . . .
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
Introduction Thank you for purchasing your new Panasonic cordless phone system. We recommend keeping a record of the following information for future reference. 1 Serial No. Date of purchase Name and address of dealer 1. The serial number can be found on the bottom of the unit. Caller ID and Call Waiting Service, where available, are telephone service provider services. After subscribing to Caller ID, this phone will display a caller’s name and phone number. Call Waiting Caller ID, which dis
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Introduction Incorrect reassembly can cause electric shock when the unit is Important safety subsequently used. instructions 12. Unplug this unit from power outlets and refer servicing to an authorized service When using this unit, basic safety center when the following conditions precautions should always be followed to occur: reduce the risk of fire, electric shock, or A. When the power cord is damaged personal injury. or frayed. 1. Read and understand all instructions. B. If liquid
ページ8に含まれる内容の要旨
Introduction CAUTION: WARNING: Installation L To prevent the risk of fire or electrical shock, do not expose this product to rain L Never install telephone wiring during a or any type of moisture. lightning storm. L Unplug this unit from power outlets if it L Never install telephone jacks in wet emits smoke, an abnormal smell or locations unless the jack is specifically makes an unusual noise. These designed for wet locations. conditions can cause fire or electric L Never touch uninsula
ページ9に含まれる内容の要旨
Introduction hills, concrete walls, tunnels, subways, or near metal objects such as wire For best performance fences, etc. L Operating near appliances operating Base unit location/noise near 5.8 GHz may cause interference. The base unit and cordless handset(s) use Move away from these electrical radio waves to communicate with each appliances. other. Routine care For maximum distance and noise-free L Wipe the outer surface of the unit with a operation, we recommend the following: soft c
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
Preparation Connecting the base unit handset and AC adaptor Corded Raise the antenna. Handset Handset Cord Fasten the AC adaptor cord to prevent accidental disconnection. Power Outlet (AC 120 V, 60 Hz) Hook AC Adaptor PQLV256 L Use only a Panasonic handset with the KX-TG4500. L Use only the included Panasonic AC Adaptor PQLV256 (Order No. PQLV256Z). L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected
ページ13に含まれる内容の要旨
Preparation Connecting the line cords Connect the telephone line cords to the base unit. To connect two two-line telephone jacks Two-Line Telephone Jacks (RJ14C) LINE3 4-Wire LINE4 Telephone Line Cord LINE 3/4 LINE 1/2 LINE1 LINE2 For assistance, please visit http://www.panasonic.com/phonehelp 13
ページ14に含まれる内容の要旨
Preparation To connect four single-line telephone jacks For this connection, please purchase two Panasonic T-adaptors KX-J24 and two 2-wire telephone line cords (PQJA10088Z). To order, call the accessories telephone number shown on page 5. Single-Line Telephone Jacks (RJ11C) 2-Wire Telephone Line Cord LINE4 T-Adaptor (KX-J24) LINE3 4-Wire Telephone Line Cord LINE 3/4 LINE 1/2 2-Wire Telephone Line Cord LINE2 Connect the telephone line cords to the T-adaptor KX-J24. T-Adaptor (KX-J24) 2-LIN
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
Preparation Installing the battery in the Battery charge cordless handset Place the cordless handset on the charger and charge for 7 hours before initial use. 1 Insert the battery, and press it down Make sure that the cordless handset faces until it fits in position within the forward as shown. compartment. L The CHARGE indicator will light, and “Charging” is displayed. Note: L When the battery is fully charged, L The end of the battery with the metal “Charge completed” is displayed. ter
ページ17に含まれる内容の要旨
Preparation Battery strength Battery performance You can confirm the battery strength on the After your Panasonic battery is fully cordless handset display. charged, you can expect the following performance: Battery icon Battery strength Operation Operating time 5 Fully charged 1 While in use Up to 15 hours 6 Medium (talking) 7 Low While not in use Up to 8 days 2 When flashing: needs to (standby) be recharged. 1. Maximum talk time acheived after sev- 8 Discharged eral recharge cycles. 2. The
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
ページ20に含まれる内容の要旨
Preparation 1 2 3 4 5 6 1 AC adaptor socket 2 Backup battery cover 3 Line 3/4 jack 4 Line 1/2 jack 5 Headset jack 6 Base handset socket 20 For assistance, please visit http://www.panasonic.com/phonehelp
