ページ1に含まれる内容の要旨
Installation and Assembly:
Universal Flat Wall Mount for 10" - 37" LCD Flat Panel
Screens
Models: SF 635P, SF 635P-S, SF 635, SF 635-S, SF 632P, SF 632P-S, SF 632,
SF 632-S
This product is UL Listed. It must be
Features:
installed by a qualified professional
installer.
For 10" to 37" flat panel screens
Ultra-slim design holds the screen flat against the wall
Max UL Load Capacity: 115 lb (52.2 kg)
3215 W. North Ave. • Melrose Park, IL 60160 (800) 729-0307 or (708) 865-8
ページ2に含まれる内容の要旨
Note: Read entire instruction sheet before you start installation and assembly. WARNING Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-729-0307. This product should only be installed by a qualified professional. Make sure that the wall will safely support the combined load o
ページ3に含まれる内容の要旨
Parts List SF 635P, SF 635P-S, SF 635, SF 635-S, SF 632P SF 632P-S SF 632 SF 632-S Description Qty Part # Part # Part # Part # A wall plate 1 095-1320 095-4320 095-1320 095-4320 B hook bracket 1 095-1321 095-4321 095-1321 095-4321 C adapter plate 1 095-1322 095-4322 095-1322 095-4322 D M5 x 12 mm screw 2 520-1027 520-1027 520-1064 520-1064 E M5 x 6 mm phillips screw 4 520-1023 520-1023 520-1023 520-1023 F #10 SAE washer 4 540-9400 540-9400 540-9400 540-9400 G #14 x 2.5" hex head wood screw 2 5S1
ページ4に含まれる内容の要旨
Installation to Single Wood Stud Wall WARNING Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components. Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based 1 on its edges, draw a vertical line down the stud’s center. Place wall plate (A) on wall as a template, making sure that the two mounting holes are over the stud centerline. Level plate, and mark the center of the t
ページ5に含まれる内容の要旨
SOLID CINDER BLOCK CONCRETE Installation to Solid Concrete or Cinder Block WARNING When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifica- tions. It is suggested that a standard electric drill on slow setting
ページ6に含まれる内容の要旨
Attaching Adapter Plate to Screen with VESA 200 or 200 x 200 Mounting Pattern Note: For VESA 75 mm and 100 mm patterns, see following page. C Thread M5 socket pin screws (D) to hook bracket (B) 2 making the screws flush with bracket as shown. Attach hook bracket (B) to adapter plate (C) using B four M5 x 6 mm screws (E) and #10 washers (F) as shown. F E D WARNING If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secure
ページ7に含まれる内容の要旨
Attaching Hook Bracket to Screen with VESA 75 or 100 Mounting Pattern Thread M5 phillips screws (D) to hook bracket (B) 2 making the screws flush with bracket as shown in B figures 2.1 and 2.2. B D D fig. 2.2 fig. 2.1 WARNING If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. FOR VESA 75 MOUNTING PATTERN: FOR VESA 100 MOUNTING PATTERN: 3 Choose hole pattern as shown bel
ページ8に含まれる内容の要旨
Installing and Removing Flat Panel Screen Hook screen onto wall plate (A) figure 4.1. Tighten SCREEN 4 M5 x 12 mm screws (D), shown in figure 4.2 and A detail 1. Note: For security models, use 4 mm security allen wrench (O) to tighten M5 x 12 mm screws (D). To remove screen from mount, loosen screws (D) and lift screen off of mount. WARNING Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely handle placement of the screen. Failure t
