ページ1に含まれる内容の要旨
Owner’s Guide
Manual del usuario
Guide d’utilisation
| |
NV22 NV22C NV22P
NV22T | NV22Q
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
English Contents Thank you for purchasing the Important Safety Instructions 2 Getting Started 4 Infinity Upright Using the Vacuum 6 Vacuum. Transporting the Vacuum 7 Cleaning with the Vacuum Accessories 8 Emptying the Dust Cup Assembly 10 Proper Care of Your Infinity Upright Vacuum 11 Troubleshooting 12 Checking for Blockages 13 Maintenance 14 Warranty and Registration 16 TOLL FREE: 1-888-668-9600 www.infinityvac.com 1
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS For Household Use Only When using an electrical appliance, basic WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY. safety precautions should always be DO NOT USE OUTDOORS OR ON WET SURFACES: observed, including the following: General Electrical Safety: READ ALL INSTRUCTIONS BEFORE Unplug from electrical outlet when not in use and before servicing. USING YOUR INFINITY UPRIGHT VACUUM. DO NOT use vacuum with a damaged cord or plug. D
ページ5に含まれる内容の要旨
English Cyclonic Chamber/Dust Cup/Filters: Before turning on the vacuum: • Make sure that dust cup, cyclonic chamber and all filters are in place after routine maintenance. • Make sure that all components and filters are thoroughly dry after routine cleaning. • Only use filters and accessories provided by EURO-PRO Operating LLC [Failure to do so will void the warranty.] General Cleaning: DO NOT run the vacuum over large-sized objects. DO NOT pick up hard or sharp objects such as glass, nails,
ページ6に含まれる内容の要旨
Getting Started 4 g 5 7 3 i 2 j h Along with your upright unit, you will find the following components: Your Infinity Upright is easy 4 Slide the handle assembly into the to assemble: upright unit aligning the hose hook a Handle Assembly on the handle assembly with the b Cleaning Attachments 1 Lay your vacuum body on a level c Extra Filters power cord hooks on the back of surface. the unit. d Super Stretch Hose 2 Slide the electrical connection from e Floor Power Nozzle 5 Secure the hand
ページ7に含まれる内容の要旨
English c 8 d 9 a b 8 Attach the Super Stretch Hose: 9 When storing your vacuum, wind IMPORTANT: cord around the two cord holders For suction to reach the Floor Power a) Snap hose into swivel connector and secure with cord clip: Nozzle, the Cleaning Wand and b) Route under anti-tip hook Super Stretch Hose must be attached • Quick Cord release at the top of c) Route over upper hose holder securely on the vacuum body. the unit – place in the upright d) Press securely onto cleanin
ページ8に含まれる内容の要旨
Using the Vacuum Your Infinity Upright Vacuum is a versatile tool that can be used to clean bare floor surfaces or carpets – with the click of a switch. Stand the vacuum into the upright position. Plug in the vacuum. Bare Floors / Tools 4 Off 1 Suction Control Carpets 1 Start with the Power Switch in the 4 When cleaning bare floors: IMPORTANT: When cleaning throw “OOff” position. rugs: release suction as needed on Select the “IOn” position for the hose connector. Close completely su
ページ9に含まれる内容の要旨
English Transporting the Vacuum Stand the vacuum into the upright position. Unplug the vacuum. Wind cord around the two cord holders. Secure Super Stretch Hose in place. 2 1 Indicator Light IMPORTANT: Your Brush Roll 1 To roll the vacuum: 2 To carry the vacuum: Indicator Light will illuminate solid Hold the handle from either With the unit in the standing green when brush roll is on, direction, and tilt unit back position, lift by the Dust Cup or solid red if there is a on wheels. As
ページ10に含まれる内容の要旨
Cleaning with the Vacuum Accessories Before cleaning with your accessories: IMPORTANT: Stand vacuum into upright position. To prevent vacuum Secure Super Stretch Hose in the from tipping, secure anti-tip hose hook to prevent tipping. hose under the anti-tip hose hook. Select the “IOn” position for suction only cleaning. DO NOT pull vacuum cleaner around by the hose. DO NOT overextend the hose. Vacuum Accessories Your vacuum comes with a Super Stretch Hose and Cleaning Wand. Us
ページ11に含まれる内容の要旨
English Suction Control 2 2 Using the Cleaning Wand: *Note: for models NV22C / NV22P / NV22T / NV22Q, your Infinity comes with a Pet Hair Power Brush that is kept in a separate accessory bag. Stand the vacuum into upright position. Pet Hair Power Brush – this unique tool has dual felt strips along the cleaning surface that are designed for heavy-duty pet Remove the Cleaning Wand (with hair removal from carpeted stairs and upholstery. hose attached) from the unit. Push the selected tool
ページ12に含まれる内容の要旨
Emptying the Dust Cup Assembly Note: Some dust and debris may For best results empty the Dust Cup remain in the top of your dust cup Assembly after each use; empty several assembly on or near the metal times during prolonged usage. screen. It is not necessary to Or empty the Dust Cup Assembly when completely remove this material it reaches the MAX fill line; NEVER before continuing to vacuum; OVER-FILL THE DUST CUP. Infinity’s advanced cyclonic action Stand vacuum into upright
ページ13に含まれる内容の要旨
English Proper Care of Your Infinity Upright Vacuum Date Purchased: For proper care, consult the table to the Component Maintenance Schedule right for the maintenance schedule of your Cyclonic Chamber and Filters. 1 Cyclonic Chamber Empty every 6 months, under normal use Lock vacuum into upright position. 2 Foam Filters (2) Wash every 3 to 6 months, under normal use Turn vacuum off. Felt Filter Wash every 12 months, under normal use CAUTION: Unplug the vacuum; 1 Cleaning the Cyclonic Cham
ページ14に含まれる内容の要旨
Troubleshooting WARNING: to reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. Problem Suggested Action Vacuum will not run. Check to see if plugged in properly. Check circuit breaker/fuse. Check On/Off switch. If vacuum still does not run, see Resetting the Motor Thermostat on page 14. Vacuum is not picking up dirt. Check the Dust Cup. Check the Foam Filters. If the Dust Cup and Filter don’t require cleaning, ch
ページ15に含まれる内容の要旨
English Checking for Blockages Blockages may cause your vacuum to 1 Dust Cup Air Duct: overheat and shut down. If so, clear the Stand vacuum into upright position. blockages, then follow the instructions Remove Dust Cup Assembly and empty Dust Cup, for Resetting the Motor Thermostat if necessary. on page 14. Disconnect the Super Stretch Hose. WARNING: Never insert sharp objects into any opening to clear an Check Air Duct behind Dust Cup for clogs; clear before obstruction. replacing Dus
ページ16に含まれる内容の要旨
Maintenance Resetting the Motor Thermostat Your Infinity Upright Vacuum is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. To reset the Motor Thermostat: Wait 45 minutes for vacuum to cool; then plug in the vacuum. Move the Power Button to the “O – Off” position. Turn the Power Switch to the “I – On” position to start the vacuum. Unplug the vacuum. Note: if vacuum still does not start, Check for clogged hose or filter; unclog
ページ17に含まれる内容の要旨
English A Ordering Replacement Parts To order additional parts and accessories, go to www.infinityvac.com or call 1-888-668-9600. Note: some parts may be available at your local Infinity retailer. 1 Cleaning the Pet Hair Power Brush Part Part No. Slide locking latch (A) forward. Super Stretch Hose 1114-FC Gently tilt brush housing upward Dusting Brush & Crevice Tool 1115-FC to open. Foam & Felt Filters XF22 IMPORTANT: DO NOT force; it will Turbo brush 1117-FC not open all the way. Clea
ページ18に含まれる内容の要旨
Warranty and Registration Your Infinity Upright Vacuum EURO-PRO FIVE-YEAR (5) LIMITED WARRANTY comes with a Five year limited EURO-PRO Operating LLC warrants this product to be free from defects in material and warranty. workmanship for a period of five (5) years from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and FOR CANADIAN CONSUMERS ONLY exceptions. Please fill out and mail the Owner If your appliance fails to
ページ19に含まれる内容の要旨
English Owner Registration Card FOR CANADIAN CONSUMERS ONLY Please fill out and mail this sheet within ten (10) days of purchase. The registration will enable us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions. Mail to the following address: • Canada: EURO-PRO Operating LLC 4400 Bois Franc, St. Laurent, Québec H4S 1A
ページ20に含まれる内容の要旨
