ページ1に含まれる内容の要旨
VentSurface
User guide
HC90 and HI120 models
NZ AU GB IE
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 Contents Introduction 3 Safety and warnings 4 Using your VentSurface 5 Care and cleaning 9 Troubleshooting 12 Warranty and service 13 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our website listed on the back cover or contact your local Fisher & Paykel dealer.
ページ4に含まれる内容の要旨
2 Introduction Introducing your VentSurface Congratulations on your new purchase. Your Fisher & Paykel VentSurface is the ultimate in extractor hoods, giving you different modes and extraction speeds to suit your changing needs. Your VentSurface can also operate and turn off automatically and alerts you when it needs cleaning. Before using your VentSurface Make sure the installer has correctly installed your VentSurface. Read this guide, taking special note of the ‘Safety and warnings’ se
ページ5に含まれる内容の要旨
3 Safety and warnings Your safety is important to us. Please read this information before using your VentSurface. WARNING! Electrical Shock Hazard Always disconnect the appliance from the mains electricity supply before carrying out any servicing or maintenance operations. Failure to do so may result in electrical shock.
ページ6に含まれる内容の要旨
4 Safety and warnings WARNING! Hot Surface Hazard Make sure the elements or gas burners of the cooking surface always have pans/pots on them and never heat the filter(s) of your appliance directly. When frying, never leave pans unattended as there is a risk of the oil overheating and catching fire. If reusing frying oil, the risk of fire is greater. Never prepare flambé (flame-cooked) dishes under the appliance. To avoid fire hazard, make sure that no grease deposits accumulate on th
ページ7に含まれる内容の要旨
5 Safety and warnings Important safety instructions Make sure that the room in which the appliance is used has adequate ventilation, especially when other appliances burning gas or other fuels are being used at the same time. For island models, make sure the ceiling is able to withstand the total weight (56 kg) of the appliance suspended from it. For wall models, make sure the wall is able to withstand the total weight (34 kg) of the appliance mounted on it. Take care when removing
ページ8に含まれる内容の要旨
6 Safety and warnings Important safety instructions Young children should be supervised to ensure that they do not play with the appliance. Children of less than 8 years old must be kept away from the appliance unless continuously supervised. This appliance can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of t
ページ9に含まれる内容の要旨
7 Using your VentSurface Control panel features 1 23 4 5 6 Fig.1 Control panel 1 Fan on/off (Stand-by) 2 Decreases fan speed 3 Mode, speed and cleaning alert display 4 Increases fan speed 5 Timer 6 Lamps on/off Using your VentSurface for the first time or after a long holiday 1 Make sure your cooker or cooktop is turned off and there are no draughts in the room. 2 Make sure your VentSurface is on stand-by (ie plugged into a power outlet which is switched on at the wall but the fan is off). 3 Pr
ページ10に含まれる内容の要旨
8 Using your VentSurface Choosing between normal and high power modes These two modes give you flexibility and optimum VentSurface performance to suit your changing cooking activities. Use normal mode for everyday cooking purposes, and high mode during longer periods of intensive cooking (eg holidays or family gatherings) for more powerful venting. Your VentSurface operates in normal mode as a default setting. To change between normal and high power modes 1 Make sure your VentSurface is on
ページ11に含まれる内容の要旨
9 Using your VentSurface Using your VentSurface in automatic mode When the VentSurface is in automatic mode, its sensor will automatically turn the fan on, adjust its speed and turn the fan off as needed. To illuminate your cooking area, press the button. Note: your VentSurface will revert to the default manual mode setting whenever you press the button to turn the VentSurface off manually (into stand-by) or unplug it from its power outlet. To change from automatic to manual mode
ページ12に含まれる内容の要旨
10 Using your VentSurface Using the timer (in manual mode only) When the timer is activated the VentSurface will run for 10 minutes and then turn off automatically. the selected fan speed will flash in the display while the timer is counting down. To activate the timer 1 Select a fan speed between “1” and “5”. 2 Press the button briefly, until you hear a short beep. 3 The timer function is now activated and your VentSurface and the lamps will automatically turn off after 10 minutes. Note
ページ13に含まれる内容の要旨
11 Care and cleaning Important! Always disconnect the appliance from the mains electricity supply before carrying out any servicing or maintenance. Failure to do so may result in death or electrical shock. Do not let grease deposits accumulate on your VentSurface, as these could create a fire hazard. Do not use harsh/abrasive cleaners, scourers or sharp metal scrapers to clean your VentSurface. Do not clean the areas behind the filters. How do I know when the filters need clea
ページ14に含まれる内容の要旨
12 Care and cleaning To replace the carbon filter 1 Stop/reset the carbon filter alert signal. If “C” is flashing in the display alternately with the fan speed setting, turn the VentSurface off buttons simultaneously by pressing the button, then press the and and hold down for five seconds until you hear a beep. “8” will show in the display until the alert signal has been reset. 2 Unplug the VentSurface from the power outlet or switch off at the wall. 3 Unclick the front edge of the
ページ15に含まれる内容の要旨
13 Care and cleaning Cleaning the stainless steel surfaces Do not use abrasive cleaners, cloths or pads to clean your VentSurface. Wipe the stainless steel surfaces often, using warm water and a mild household detergent. The stainless steel may also be cleaned with a suitable cleaner and polish. Note: if you choose to use a commercial stainless steel cleaner, please read the label to make sure it does not contain chlorine compounds as these are corrosive and may damage the appearan
ページ16に含まれる内容の要旨
14 Troubleshooting Troubleshooting chart Problem Cause What to do “A “ flashing alternately The aluminium mesh filter needs Clean the aluminium mesh filter with the fan speed cleaning (automatic following the instructions in setting. alert). Care and cleaning’. ‘ “C” flashing alternately The carbon filter needs Replace the carbon filter with the fan speed replacing (automatic following the instructions in setting. alert). ‘Care and cleaning’. “A” or “C” flashing The filter(s) need clean
ページ17に含まれる内容の要旨
15 Warranty and service Manufacturer’s warranty When you purchase any new Fisher & Paykel rangehood you automatically receive a two year Manufacturer’s Warranty covering parts and labour for servicing. Fisher & Paykel undertakes to Repair or, at its option, replace without cost to the owner either for material or labour any part of the Product, the serial number of which appears on the Product, which is found to be defective within TWO YEARS of the date of purchase. This warranty
ページ18に含まれる内容の要旨
16 Warranty and service Customer care Check the things you can do yourself. Refer to your User Guide and check: 1 your appliance is correctly installed 2 you are familiar with its normal operation If after checking these points you still need assistance please refer to the following: In New Zealand If you need assistance call...* Call your Fisher & Paykel retailer who is trained to provide information on your appliance, or if we can be of any further help, please contact our Customer
ページ19に含まれる内容の要旨
17 Warranty and service Product details Fisher & Paykel Ltd Model Serial No. Date of Purchase Purchaser Dealer Suburb Town Country
ページ20に含まれる内容の要旨
