ページ1に含まれる内容の要旨
AVD701
OWNER’S MANUAL
Mobile Video System
DVD Player with Radio
7 Inch Touch Screen Monitor
RBDS Function
My Music Operation
Bluetooth Function
USB Interface
SD/MMC Card Interface
Remote Control
1
ページ2に含まれる内容の要旨
CONTENTS SAFETY INFORMATION……………………………………………………..3 DISC NOTES………………………………..................……………………..5 INSTALLATION……………………………………………..............………..7 CONNECTIONS………...………………………………………….………....8 LOCATIONS AND FUNCTION OF THE PLAYER…………………..........9 LOCATIONS AND FUNCTION OF THE REMOTE CONTROL…..….....11 BASIC OPERATION…………………………………………...…….…......14 MENU OPERATION…………………………………………………....…...16 RADIO OPERATION…………………………………………………….……….……..16 DISC OPERATION……………………………………………………..…………...
ページ3に含まれる内容の要旨
SAFETY INFORMATION Use This Product Safely This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit protect you if you observe the following procedures for installation, use and servicing. This unit doesn’t contain any parts that can be repaired by the user. When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Car Washing Do not
ページ4に含まれる内容の要旨
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSO
ページ5に含まれる内容の要旨
DISC NOTES Disc formats supported by this player DVD TM 12 cm disc (Single-sided disc only) Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Handling and Cleaning Dirt, dust, scratches and warping discs will cause wrong operation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should always be kept in its case when not in use to prevent from damage. Do not place discs in
ページ6に含まれる内容の要旨
DISC NOTES Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc. 6
ページ7に含まれる内容の要旨
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling o
ページ8に含まれる内容の要旨
CONNECTIONS Line No. Line color Function (terminal color) 1 Black Video input (YELLOW) 2 Black Audio input right (RED) 3 Black Audio input left (WHITE) 4 Grey Video output (YELLOW) 5 Green Rearview input (YELLOW) 6 Green Subwoofer output (GREEN) 7 Black Radio antenna connector (BLACK) 8
ページ9に含まれる内容の要旨
LOCATIONS AND FUNCTION OF THE PLAYER KEYS ON THE FRONT PANEL WHEN THE MONITOR TURNING DOWN: 17 18 19 9
ページ10に含まれる内容の要旨
LOCATIONS AND FUNCTION OF THE PLAYER 1. /SRC: In power off status, press it to turn the unit on. Press it for several seconds to turn off the unit. In normal working status, press it to select the desired source mode, such as DVD, RADIO, AV IN, SD/USB … etc. 2. IR (remote sensor): receive signal from the remote control to control the unit. 3 & 4. / : Seek the radio stations, select the track backward/forward, how to operation please refer to the contents below.
ページ11に含まれる内容の要旨
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 11
ページ12に含まれる内容の要旨
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 1. 10. VOL+/VOL- Press to increase/decrease the Press it to turn on the unit. When the volume level. unit is on, press it to turn the unit off. 11. PBC 2. MODE It can be used to change between When the unit is on, press it to select PBC ON and PBC OFF on the VCD the different mode, such as RADIO, disc. DISC, AV IN, SD/USB mode. 12. OSD 3. BND/SYS In DISC mode, press to display OSD In radio mode, press it shortly to (th
ページ13に含まれる内容の要旨
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL Using the Remote Control 23. SEEK- / SEEK+ Point the remote control towards the Press shortly to skip to the remote control signal receiver on the previous/next track. player front face. Press and hold it to activate fast Operation angle: About ±30 degree in reverse/forward function. each the direction of the front of the In radio mode, press it shortly to remote sensor. search the frequency backward/forward manually
ページ14に含まれる内容の要旨
BASIC OPERATION TURNING ON/OFF THE UNIT Press button on the front panel or on the remote control to turn the unit on. When the unit is on, press button on the front panel for several seconds or press on the remote control will turn the unit off. PANEL ANGLE ADJUST The front monitor panel can be turn down or turn up to some degree by using / buttons on the front panel. SOUND ADJUSTMENT Repeatedly press SEL button on the front panel of the unit or on the remote control to select th
ページ15に含まれる内容の要旨
BASIC OPERATION Note: If there isn’t any disc in the disc slot, DISC mode will be skipped. BRAKE FUNCTION If the brake wire (pink wire) isn’t connected to the ground (when driving), the video picture will not be shown on the screen in DISC/AV/USB/SD mode for safety purpose. Only the audio will be heard. Note: Only when parking, the video picture can be seen on the screen. When driving, the warning information will be displayed. RESET FUNCTION The reset button RST is on the front pane
ページ16に含まれる内容の要旨
MENU OPERATION MAIN MENU In the current mode, click icon on the screen to return to the menu interface. Clock Display Click it Click the different icon on the interface to enter into the desired mode. The following contents will introduce the different functions the unit provides. Click icon to enter into the Setting interface. Click to exit the main menu interface and return to the current mode. 1.
ページ17に含まれる内容の要旨
MENU OPERATION press AMS icon on the screen, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then stations are stored into the preset number button in turn according to the strength of the stations. When auto seek is finished, it will enter into preset scan mode automatically. Program Scanning Shortly press AMS button on the remote control or click AMS icon on the screen to scan all station presets saved in memory. A
ページ18に含まれる内容の要旨
MENU OPERATION ※ EQUALIZATION EQ--- click to change the equalization mode, such as OFF, ROCK, JAZZ, CLAS. ※ RBDS OPERATION a) Click TA icon on the screen to switch TA on or off. When TA on, the unit will search Traffic Announcement automatically. When received a Traffic Announcement station, the unit will change to the Traffic Announcement station automatically. Click TA icon to exit TA mode. b) Click PT
ページ19に含まれる内容の要旨
MENU OPERATION 2. DISC OPERATION If there is no disc in the disc slot, in any mode press button on the front panel to slide down the monitor panel then insert a disc into the disc slot, the unit will switch to the Disc mode and play the disc automatically. If there is a disc in the disc slot, press SRC button on the front panel or MODE button on the remote control or tap [DISC] icon on the MENU interface to change the mode to DISC mode, then the unit will play the disc automatically.
ページ20に含まれる内容の要旨
MENU OPERATION the remote control during playback will skip to the previous/next track. Note: For some VCD2.0 discs (PBC-playback control), / buttons or / icons may be unavailable. Note you can use the numeric buttons (0-9) and 10+ button on the remote control to select the track directly. ※ PAUSING PLAY Press on the remote control or click on the screen during playback will stop playback temporarily. To return to normal playback, press again. ※ RAPID FORWARD/RAPID REVERSE
