ページ1に含まれる内容の要旨
USER’S GUIDE
Agilent Technologies
Model 66319B/D, 66321B/D
Mobile Communications DC Source
Featuring programmable output resistance
(Refer to page 20 for a brief description of the model differences.)
Agilent Part No. 5964-8184
Microfiche No. 5964-8185
Printed in Malaysia: May, 2003
ページ2に含まれる内容の要旨
Warranty Information CERTIFICATION Agilent Technologies certifies that this product met its published specifications at time of shipment from the factory. Agilent Technologies further certifies that its calibration measurements are traceable to the United States National Bureau of Standards, to the extent allowed by the Bureau's calibration facility, and to the calibration facilities of other International Standards Organization members. WARRANTY This Agilent Technologies hardware product
ページ3に含まれる内容の要旨
Safety Summary The following general safety precautions must be observed during all phases of operation of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer's failure to comply with these requirements. GENERAL This product is a Safety Class 1 instrument (provided with a protective earth t
ページ4に含まれる内容の要旨
SAFETY SYMBOLS Direct current Alternating current Both direct and alternating current Three-phase alternating current Earth (ground) terminal Protective earth (ground) terminal Frame or chassis terminal Terminal is at earth potential. Used for measurement and control circuits designed to be operated with one terminal at earth potential. Terminal for Neutral conductor on permanently installed equipment Terminal for Line conductor on permanently installed equipment
ページ5に含まれる内容の要旨
Declaration Page DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Agilent Technologies, Inc. Manufacturer's Address: 140 Green Pond Road Rockaway, New Jersey 07866 U.S.A. declares that the Product Product Name: a) Dynamic Measurement DC Source b) System DC Power Supply c) Remote Front Panel Model Number: a) Agilent 66311B, 66311D, 66312A, 66111A, 66321B, 66321D b) Agilent 6612B, 6611C, 6612C, 6613C, 661
ページ6に含まれる内容の要旨
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Agilent Technologies, Inc. Manufacturer's Address: 140 Green Pond Road Rockaway, New Jersey 07866 U.S.A. declares that the Product Product Name: a) Mobile Communication DC Source-Dual Output Model Number: a) Agilent 66319B, 66319D conforms to the following Product Specifications: Safety: IEC 1010-1:1990+A1(1992)/EN61010-1:1993 EMC: CISPR 11:1990 / EN
ページ7に含まれる内容の要旨
Acoustic Noise Information Herstellerbescheinigung Diese Information steht im Zusammenhang mit den Anforderungen der Maschinenläminformationsverordnung vom 18 Januar 1991. * Schalldruckpegel Lp <70 dB(A) * Am Arbeitsplatz * Normaler Betrieb * Nach EN 27779 (Typprüfung). Manufacturer's Declaration This statement is provided to comply with the requirements of the German Sound Emission Directive, from 18 January 1991. * Sound Pressure Lp <70 dB(A) * At Operator Position * Nor
ページ8に含まれる内容の要旨
Table of Contents Warranty Information 2 Safety Summary 3 Declaration Page 5 Acoustic Noise Information 7 Printing History 7 Table of Contents 8 1 - QUICK REFERENCE 11 The Front Panel - At a Glance 11 The Rear Panel - At a Glance 12 Instrument Configuration 12 Front Panel Number Entry 13 Front Panel Annunciators 14 Immediate Action Keys 14 Front Panel Menus - At a Glance 15 SCPI Programming Commands - At a Glance 16 2 - GENERAL INFORMATION 17 Document Orientation 17 Safety
ページ9に含まれる内容の要旨
Types of SCPI Messages 65 SCPI Data Formats 67 SCPI Command Completion 68 Using Device Clear 68 SCPI Conformance Information 69 7 - PROGRAMMING THE DC SOURCE 71 Introduction 71 Programming the Output 71 Triggering Output Changes 73 Making Basic Measurements 75 Making Enhanced Measurements 76 Making DVM Measurements 79 Triggered Measurements 80 Programming the Status Registers 84 Inhibit/Fault Indicator 89 8 - LANGUAGE DICTIONARY 91 Introduction 91 Calibration Commands 96 Di
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
1 Quick Reference The Front Panel - At a Glance 1 A 14-character display 2 Annunciators indicate 3 Rotary control sets voltage, shows output measurements operating modes and status current, and menu parameters. and programmed values. conditions. " " ! ! " " ! ! Use and to set the resolution; then adjust the value with the knob. 1 2 3 66319D DUAL OUTPUT Mobile Communications DC Source CV CC Unr Dis OCP Prot Cal Shift Rmt Addr Err SRQ SYSTEM FUNCTION ENTR
ページ12に含まれる内容の要旨
1 - Quick Reference The Rear Panel - At a Glance 1 DVM inputs. 2 GPIB (IEEE-488) 3 Used to connect the 4 INH/FLT connector. Can Connector plug is interface connector. Agilent 14575A remote be configured for Digital I/O removable. front panel display. and Trigger input. Connector plug is removable. 2 3 4 1 NO OPERATOR SERVICEABLE PARTS REFER SERVICING TO SERVICE TRAINED WARNING: INH FLT +- + - + ! DVM OUTPUT 2 OUTPUT 1 0 - 12V / 0 - 1.5A 0 - 15V / 0 - 3A -S -S +S +S -+ - + FOR CON
ページ13に含まれる内容の要旨
Quick Reference - 1 Front Panel Number Entry Enter numbers from the front panel using one the following methods: Use the arrow keys and knob to change voltage or current settings NOTE: The output must be ON to see the displayed values change in Meter mode. With the output enabled, this method changes the output voltage or current immediately. Use the Function keys and knob to change the displayed settings Use the arrow keys to edit individual digits in the displayed setting Incremen
ページ14に含まれる内容の要旨
1 - Quick Reference Front Panel Annunciators CV Output 1 or output 2 is operating in constant voltage mode. CC Output 1 or output 2 is operating in constant current mode. Unr Output 1 or output 2 is unregulated. The output is OFF. Press the Output On/Off key to turn the output on. Dis The over-current protection state is ON. Press the OCP key to turn over-current OCP protection off. Indicates that the output has been disabled by one of the protection features. Prot Press the Pro
ページ15に含まれる内容の要旨
Quick Reference - 1 Front Panel Menus - At a Glance Address Sets the GPIB Address ADDRESS 7 $$ $$ Selects language (SCPI) LANG SCPI $$$$ REMOTE FP OFF Enables or disables Agilent 14575A remote front panel (ON | OFF) $$$$ ROM: A.00.00 Displays the firmware revision of the instrument $$$$ SN: US12345678 Displays the serial number of the instrument Recall Recalls the instrument state *RCL 0 Shift Save *SAV 0 Saves the present instrument state Shift Error Displays the
ページ16に含まれる内容の要旨
1 - Quick Reference SCPI Programming Commands - At a Glance NOTE: Some [optional] commands have been included for clarity. Refer to chapter 8 for a complete description of all programming commands. ABORt SENSe CALibrate :CURRent :RANGe :CURRent [:POSitive] :DETector ACDC | DC :MEASure :LOWRange :FUNCtion “VOLT” | “CURR” | "DVM" :R3 :LEAD :STATus? :AC :PROTection :STATe 1 :CURRent2 :SWEep :OFFSet :POINts :DATA :POINts :DATE
ページ17に含まれる内容の要旨
2 General Information Document Orientation This manual describes the operation of the Agilent Model 66321B/D Mobile Communications and the Agilent Model 66319B/D Dual Output DC Source. Agilent Models 66321D and 66319D have an additional DVM measurement input on the rear panel. Unless otherwise noted, all models will be referred to by the description "dc source" throughout this manual. The following Getting Started Map will help you find the information you need to complete the specific
ページ18に含まれる内容の要旨
2 - General Information Safety Considerations This dc source is a Safety Class 1 instrument, which means it has a protective earth terminal. That terminal must be connected to earth ground through a power source equipped with a ground receptacle. Refer to the Safety Summary page at the beginning of this guide for general safety information. Before installation or operation, check the dc source and review this guide for safety warnings and instructions. Safety warnings for specific procedur
ページ19に含まれる内容の要旨
General Information - 2 Description and Model Differences Agilent 66321B The Agilent 66321B Mobile Communications DC Source is a high performance dc power source that provides peak current sourcing and rapid, basic measurements in a compact, half-rack box. It is designed to simplify the testing of digital wireless communications products. Excellent voltage transient response characteristics prevent test interruptions due to triggering of low voltage phone shutdown. The 15 volt source and
ページ20に含まれる内容の要旨
2 - General Information ! Triggered acquisition of digitized current and voltage waveforms ! External measurement trigger input on units with firmware revision A.03.01 and up ♦ Open sense lead protection on output 1. ♦ Automatic overvoltage protection tracking. ♦ Over-temperature, RI/DFI protection features, programmable voltage limit and current limit. ♦ Non-volatile state storage and recall with SCPI command language. ♦ User-configurable power-on/reset settings (see Appendix B). Table
