DigiPower TC-1000の取扱説明書

ページ1に含まれる内容の要旨

Operating Instructions for Travel Charger Item # TC-1000/RTC-1000/VTC-1000
PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
IMPORTANT WARNING:
This CHARGER is for charging rechargeable Li-Ion digital camera and camcorder batteries ONLY!
Attempting to charge any other batteries may damage the device, destroy the batteries and/or cause injury to the
user. Charging other batteries will void the warranty.
CAUTIONS:
Always unplug the charger when not in use.
Do not

ページ2に含まれる内容の要旨

The TC1000 charger is designed to work with changeable battery plates to fit and charge various Li-Ion digital camera and camcorder batteries. Each TC-1000 is packaged with battery plates, to fit the different battery models from the same camera manufacturer. CHOSING THE CORRECT BATTERY PLATE 1. Find the Plate labeled with the battery model for you camera. (Battery plates are inscribed with the OEM battery # as well as the DigiPower battery #) (The battery model can be found on the battery label

ページ3に含まれる内容の要旨

Operating instructions: 1. while the battery is on the charger, connect the base charger to a power source. The LCD panel will light up. The LCDs charge indicator bars will begin to appear to show the battery charge level. The bars will begin to blink at start of each charging level. st Less than 25% capacity the 1 (25%) bar will blink. nd Less than 50% capacity the 2 (50%) bar will blink. rd Less than 75% capacity the 3 (75%) bar will blink. Less than 100% capacity the 4th (100%) bar will blin