ページ1に含まれる内容の要旨
SÉRIES CLASSIC SERIES
ve sa These InsTTI ruc ons
ver conser ces IT ns rucTIson
guarde esT as InsTruccIones
Designer Series
Série Designer
Serie de diseñador
Countertop
Water Dispenser
Distributeur d’eau
pour le comptoir
Dosificador de agua
de sobremesa
VWD2636W-1 • VWD2636BLK-1
Use & Care Guide VWD2636RED-1
Guide d’utilisation et d’entretien
Manual d uso y cuidado
CAUTION: Before using water MISE EN GARDE: Avant
PRECAUCIÓN: Antes de usar el
dispenser, read this manual d'employer votre dis
ページ2に含まれる内容の要旨
® Thank you for purchasing a vitapur Water Dispenser. Please read the enclosed operating instructions carefully and retain this booklet for future reference. ® We have carefully engineered your vitapur Water Dispenser to give you years of enjoyment and trouble free operation. IMPORTANT SAFEGUARDS • For use with 3 or 5 gallon (12 or 19 liter) water bottles and most filtration systems, (not included). • Never use this dispenser with water that is unsafe to drink or is from an
ページ3に含まれる内容の要旨
® YOUR vitapur WATER DISPENSER 1. Bottle support collar 2. Ready-To-Dispense indicator lights: Red: “flashing” Heater (hot tank) is in operation "on” The hot water has reached optimum temperature and is ready for dispensing "off" Heater (hot tank) is off, however remaining water within the tank still may be hot, always exercise caution when dispensing and/or draining water from the hot water tank. Blue: "on" The cold water has reached optimum temperature
ページ4に含まれる内容の要旨
OPERATING INSTRUCTIONS Initial Product Cleaning Procedure Like most appliances, your water dispenser requires periodic maintenance for maximum efficiency and performance and must be Figure A cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water dispenser and prevent potential formation (growth) of bacteria, we strongly recommend regular Cleaning Kit cleaning. A cleaning kit is available through our Customer Service Department at 1-866-253-04
ページ5に含まれる内容の要旨
4. Plug in the water dispenser. 5. Set the power switch at the rear of the dispenser to the ON position. 6. Ready-to-dispense indicator lights will illuminate when the water reaches optimum temperature and is ready for use. In order to get steaming hot water, the (on demand) Insta-HOT* feature button must be activated and the "red" indicator light will start flashing (see Dispensing Hot Water, pg 5). IMPORTANT NOTE: Al WAYS MAkE SURE THERE IS WATER IN THE SYSTEM BEFORE ACTIvAT
ページ6に含まれる内容の要旨
Dispensing Room and Cold Water Place a glass under the spigot. For cold water, press the button downward until the desired amount of water is dispensed. Before the Insta-HOT* Feature is activated, the button dispenses room temperature water. To dispense room water, press the button downward until the desired amount of water is dispensed (for hot water, see Dispensing Hot Water). Temperature Setting The water temperatures (hot and cold) are factory set and cannot be adjust
ページ7に含まれる内容の要旨
Cleaning Your Water Dispenser IMPORTANT: Make sure you turn the power switch to the OFF position and unplug the dispenser before performing any of the following cleaning procedures. Cleaning the Outside of the Water Dispenser The outside of the dispenser can be wiped clean with a water dispenser cleaning solution or a mild soap and water mixture. Never use harsh chemicals or abrasive cleaners. Rinse thoroughly with clean water and then dry surfaces. Cleaning the Drip Tray To remove, take th
ページ8に含まれる内容の要旨
Cleaning the Inside of the Dispenser Cleaning Kit Like most appliances, your water dispenser requires periodic maintenance for maximum efficiency and performance and must be cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water dispenser and prevent potential formation (growth) of bacteria, we strongly recommend regular cleaning. A cleaning kit is available through our Customer Service Department at 1-866-253-0447 or can be ordered on line a
ページ9に含まれる内容の要旨
SPECIFICATIONS vWD2636-1 WARNING: The Water Dispenser heats Output per hr: Hot 1.3 gal / 5.0 L and dispenses water to 201˚ F / 91˚ C which can cause severe burns or Cool 0.1 gal / 0.4 L scalding. Internal Tank Capacity: Hot 0.16 gal / 0.6 L DO NOT AllOW CHIlDREN TO USE Cool 0.2 gal / 0.8 L THE HOT WATER DISPENSING BUTTON WITHOUT PROPER AND Heating Temp (approx.): 201°F / 91°C DIRECT SUPERvISION. Cooling Temp (approx.): 42.8°F - 46.4°F / 6°C - 8°C Power Consumption (Watts): Hot 1200 W Cool
ページ10に含まれる内容の要旨
FREqUENTl Y ASkED qUESTIONS q: Why is my water dispenser leaking? A: Many times a leak is caused by a defective water bottle with a small crack or pinhole (see Important Notice About leaking Bottles, pg 4). IMPORTANT: To avoid water overflow while cleaning the dispenser, always remove the bottle support collar before pouring water or cleaning solution into the reservoir (see Figure A, pg 3). q: Why is my water not cold? A: The cooling of the countertop, multi-fin semi-conductor d
