ページ1に含まれる内容の要旨
Triple Bay Conventional Gas Grill Cooktop
PRODUCT MODEL NUMBERS
JGD8348CD
GAS REQUIREMENTS
Gas supply: The installation of this appliance The maximum gas supply pressure for the Make the gas connection to the inlet of the
must conform with local codes, or in the absence appliance pressure regulator supplied on this appliance pressure regulator on this appliance
of local codes, with the latest edition of the appliance is 14" W.C. The test pressure for with a 1/2" male pipe thread. Use an approved
ページ2に含まれる内容の要旨
Triple Bay Conventional Gas Grill Cooktop PRODUCT MODEL NUMBERS JGD8348CD ELECTRICAL REQUIREMENTS The electrical supply required is 110/120-volt, A.C., 15-amp, 60-Hz. This appliance is equipped with a grounded type power cord. A grounded outlet must be provided. It is recommended, for convenience, this outlet be located in the area shown in the shaded illustration. This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with
ページ3に含まれる内容の要旨
Triple Bay Conventional Gas Grill Cooktop PRODUCT MODEL NUMBERS JGD8348CD INSTALLATION OF CABINETRY OVER YOUR GRILL Minimum horizontal clearance between the edge of the appliance and Avoid use of cabinets above cooktop for storage space to eliminate combustible construction extending from the cooking surface to 18" associated potential hazards such as reaching over open flames. (45.7 cm) above the cooking surface is: Dotted lines indicate range hood construction. 1-3/4" (4.5 cm) at rear * To eli
