ページ1に含まれる内容の要旨
®
SuperStat
Pro
Programmable
Thermostat
User Guide
ページ2に含まれる内容の要旨
Copyright April 2008 Data, drawings, and other material contained herein are proprietary to Comverge, Inc., and may not be reproduced or duplicated in any form without the prior permission of Comverge, Inc. SuperStat is a registered trademark of Comverge, Inc. Thermostat manufactured in partnership with White-Rodgers.
ページ3に含まれる内容の要旨
Contents Getting Started with Your Thermostat...............................................................3 Overview......................................................................................................................3 Thermostat Buttons .....................................................................................................4 Thermostat Display......................................................................................................6 Selecting He
ページ4に含まれる内容の要旨
Displaying Energy Price and Usage Information .............................................29 Energy Price, Estimated Bill, and Energy Usage Information......................................29 Viewing Energy Price, Estimated Bill, and Energy Usage Information ........................30 Viewing Energy Price, Estimated Bill, and Energy Usage Information ........................31 Troubleshooting Assistance Guide ..................................................................33 Index ....
ページ5に含まれる内容の要旨
Getting Started with Your Thermostat Overview ® Your SuperStat Pro thermostat consists of two main parts: the cover and the keypad door (lower portion of thermostat front as shown below). You open the cover to access the buttons to operate and program the thermostat. Open the keypad door: • Flip the keypad door down. Close the keypad door: • Push the door up until it lines up with the base. Cover Press gently until the door snaps into place. Keypad door (shown open) SuperStat P
ページ6に含まれる内容の要旨
Thermostat Buttons HOLD INFO Holds system at current Displays energy price, temperature setting until you estimated bill, and energy release by pressing RUN. usage information. RUN • Cancels holds and returns system to programmed settings. • Exits programming and saves all settings. Not used. DAY/PERIOD Toggles between day of week and time period you want to program. 4 SuperStat Pro User Guide
ページ7に含まれる内容の要旨
PRGM SYSTEM Allows you to program Selects the mode in which you want the system to your thermostat operate: cooling, heating, auto-changeover, emergency heat (applies to heat pumps only), or OFF. FAN Controls your system’s indoor fan. For energy efficiency, this is normally set to AUTO but can be set to ON. TIME/SET DEVICE/MODE Toggles between the period Toggles between COOL and HEAT for programming. start time and temperature setpoint you want to program. SuperStat Pro User
ページ8に含まれる内容の要旨
Thermostat Display Day of the week Indicates the current day of the week. Message Area HOLD Indicates the current period of the day, Indicates a system temperature hold: AUX (if strip heat in heat-pump • Flashing HOLD – temporary hold. system is called), and displays energy • Solid HOLD – permanent hold. price, estimated bill, and energy usage information. Current Temperature Time / Temperature Setpoint Displays the current room temperature. Display alternates be
ページ9に含まれる内容の要旨
Selecting Heating or Cooling Use the SYSTEM button to select your thermostat system mode. The possible system modes are: • Heating – Displays on the thermostat as HEAT. • Cooling – Displays on the thermostat as COOL. • Auto-changeover (see below) – Both HEAT and COOL icons are on. • Emergency heat – Displays EMER (flashing) and HEAT. • Off – Displays on the thermostat as OFF. When heating or cooling is On, STG 1 or STG 1+2 will display (depending on how many speeds your heating/cooling
ページ10に含まれる内容の要旨
Selecting Heating or Cooling Quick Guide Description Thermostat Display Press the SYSTEM button one or more times to select the desired mode. Cooling On: • When heating is selected, HEAT is displayed. • When cooling is selected, COOL is displayed. • When auto-changeover mode is selected, HEAT and COOL Press one or more are both displayed. times to select the • When emergency heat is selected, EMER HEAT is displayed desired mode. System Off: (EMER flashes). • When the syst
ページ11に含まれる内容の要旨
Setting the Current Day and Time Typically the current day and time on your thermostat will be set automatically by the system. In case the system does not set the day and time, you may need to set it yourself manually. Quick Guide Step Description Thermostat Display Hour and AM/PM will flash: Press the TIME/SET button twice. The display shows the Press twice. 1 hour and AM or PM flashing. Press and hold the up arrow or down arrow button Press to select the until you reach th
ページ12に含まれる内容の要旨
Setting the Current Day and Time Quick Guide Step Description Thermostat Display Minutes will flash: Press the TIME/SET button again. The display shows 3 Press again. minutes flashing. Press and hold the up arrow or down arrow button Press to select the 4 until you reach the correct minutes. minute. 10 SuperStat Pro User Guide
ページ13に含まれる内容の要旨
Setting the Current Day and Time Quick Guide Step Description Thermostat Display Day of week will flash: Press the DAY/PERIOD button. The display shows the day 5 Press once. of week flashing. Press and hold the up arrow or down arrow button Press to select the 6 until you reach the current day of the week. day of week. Press the RUN button to save your settings. 7 Press once. SuperStat Pro User Guide 11
ページ14に含まれる内容の要旨
Replacing the Batteries in Your Thermostat If BATT appears on your thermostat display, the batteries are low and need to be replaced. Batteries are not required to keep your programming or menu data. However, with batteries installed, your thermostat will maintain the time and continuously display the temperature during a loss of AC power. Required Battery Type Install batteries here. AA alkaline batteries 12 SuperStat Pro User Guide
ページ15に含まれる内容の要旨
Replacing the Batteries in Your Thermostat Quick Guide Step Description Thermostat Display Turn the system off by pressing the SYSTEM button Press until OFF is one or more times until OFF is displayed in the area 1 displayed. where the time is normally displayed. Gently pull the cover straight off the base. Remove cover. Note: Forcing or prying on the thermostat can cause 2 damage to the unit. Remove old batteries. Install fresh AA alkaline Install batteries. batteries alo
ページ16に含まれる内容の要旨
Resetting the FLTR Display If FLTR appears in your thermostat display, this is a reminder that you need to change or clean the filter in your heating and cooling system. After you change or clean the filter, you can reset the display so FLTR no longer appears. Quick Guide Description Thermostat Display Press both Press the RUN and HOLD buttons at the same time. buttons at the same time. The FLTR display no longer appears on the thermostat. 14 SuperStat Pro User Guide
ページ17に含まれる内容の要旨
Programming Your Thermostat This chapter explains how to program your thermostat, including programming heating and cooling, and setting and clearing holds. Your thermostat offers the following options for flexible programming: • Separate programs for heating and cooling. • Separate programs for each weekday separately or all weekdays together, Saturday, and Sunday. • Four time periods per day – Morning, Day, Evening, and Night. You can specify start times and temperatures for each time
ページ18に含まれる内容の要旨
Planning Your Program Before you begin programming your thermostat, you can use one of the charts below to help you plan your program. Programming Chart for Weekdays and Weekend Use this chart if you want all weekdays (MO TU WE TH FR) to be the same and weekend days (SA SU) to be the same. Weekdays Weekend Period Start Time Temp Start Time Temp MOR DAY EVE NGT MOR DAY EVE NGT 16 SuperStat Pro User Guide COOL HEAT
ページ19に含まれる内容の要旨
Planning Your Program Programming Chart for All Days of the Week Use this programming chart if you want to specify different start times and/or temperatures for each day of the week. Monday Tuesday Wednesday Thursday Friday Saturday Sunday Period Start Start Start Start Start Start Start Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp MOR DAY EVE NGT MOR DAY EVE
ページ20に含まれる内容の要旨
Programming Heating and Cooling Quick Guide Step Description Thermostat Display Be sure your screen shows the normal display. Press once. 1 Press the PRGM button to enter programming. Current mode will flash: Press until Press the DEVICE/MODE button until the desired mode 2 HEAT flashes. (HEAT or COOL) begins to flash on your display. 18 SuperStat Pro User Guide
