ページ1に含まれる内容の要旨
OPERATING INSTRUCTIONS
1. Set the fan on a dry, level and sturdy surface.
2. Plug the fan into the mains.
ON/OFF, Speed selection
1. The fan is controlled by the buttons on the speed switch box.
2. To turn the fan on press either “1”, “2” or “3” button.
3. To change the speed of the fan by selects another speed
control button. i.e. “1” is lowest, “2” is middle & “3” is highest.
4. The fan can be turned off by pressing “0” button.
INSTRUCTION MANUAL
How To Adjust Tilt
1. Insert knob to tilt
ページ2に含まれる内容の要旨
Take all the parts out of the plastic bag and separate them into their groups. To avoid scratching it is recommended that you assemble the fan light on a soft PLEASE READ AND SAVE THESE level surface. IMPORTANT INSTRUCTIONS 18” High VELOCITY FLOOR FAN STAND ASSEMBLY OPERATING INSTRUCTIONS Connect stand B to stand A by tightening fixing screw. Connect the other end of stand B to stand C by tightening fixing screw. Align the hole of stand A (left hand side) to the shock resistant block
ページ3に含まれる内容の要旨
Take all the parts out of the plastic bag and separate them into their groups. To avoid scratching it is recommended that you assemble the fan light on a soft PLEASE READ AND SAVE THESE level surface. IMPORTANT INSTRUCTIONS 18” High VELOCITY FLOOR FAN STAND ASSEMBLY OPERATING INSTRUCTIONS Connect stand B to stand A by tightening fixing screw. Connect the other end of stand B to stand C by tightening fixing screw. Align the hole of stand A (left hand side) to the shock resistant block
ページ4に含まれる内容の要旨
OPERATING INSTRUCTIONS 1. Set the fan on a dry, level and sturdy surface.
2. Plug the fan into the mains. ON/OFF, Speed selection 1. The fan is controlled by the buttons on the speed switch box. 2. To turn the fan on press either “1”, “2” or “3” button. 3. To change the speed of the fan by selects another speed control button. i.e. “1” is lowest, “2” is middle & “3” is highest. 4. The fan can be turned off by pressing “0” button. INSTRUCTION MANUAL How To Adjust Tilt
1. Insert knob to tilt
