ページ1に含まれる内容の要旨
Parts List
Instruction Manual for
B BASE-Front C BASE-Back
A FAN-Body
UltraSlimline Floor Fan
Model: 10187 (with remote-control)
Voltage: 120V AC Frequency: 60 HZ Current: 0.6 A
F
D E Remote Control
Fan-Body SCREWS
Base SCREWS
and CLIPS
Fan Assembly
STEP 1
Remove the 4 SCREWS D from the center post
on the bottom of the FAN - body A .
PLEASE READ AND SAVE THESE INSTRUCTIONS
c 2006 Seville Classics Inc. (800)-323-5565 or (310)-533-3800
www.sevilleclassics.com
2
1
ページ2に含まれる内容の要旨
Fan Assembly Control Panel STEP 2 Turn the base upside down. Unscrew the 2 base SCREWS and base CLIPS E from posts on the BASE -back C . Firmly snap the BASE-front B onto the BASE-back C by aligning the four holes onto the four posts. Replace the SCREWS and CLIPS E so that the clips wraps over the BASE-back C and tighten. STEP 3 Pass the Power Cord through the Push buttons to activate features center hole now in the center of the BASE. ON/OFF: Turns fan ON & OFF Align the BASE fron
ページ3に含まれる内容の要旨
Control Panel Control Panel Selection of Wind: Allows for three different wind settings: (2) Medium Natural Wind - The wind settings will repeat the following 80 second wind cycle with Medium speed being the most common. 1. Normal Wind: The Normal wind mode is simply the Low, Medium & High fan speed settings. 2. Sleeping Wind: The Sleeping Wind allows you to set a speed and that speed will gradually slow to Low. The air flows as an evening breeze slowing to a light night breeze.
ページ4に含まれる内容の要旨
UltraSlimline Remote Control for Floor Fan Important Safety Instructions To use your remote, point the top end directly at the front of the fan aiming READ & SAVE THESE INSTRUCTIONS at the little window just below the control panel on the top of the fan. When using electrical appliances, basic precautions should always Functions: be followed to reduce the risk of fire, electric shock and injury. Power Button -Turns fan ON & OFF 1. Use this fan only as directed in this manual. Non-recomme
