Andis Company Men's Shaverの取扱説明書

ページ1に含まれる内容の要旨

connector fork “seats” itself on the inside
CLIPPING GUIDE
“point” on the nylon bracket. Push upper
blade slightly to opposite side of bracket on Description Clipping Directions Approx. Length of Cut
the connector fork. Place lower blade on top
Fine Coarse
of the upper blade and align the screw holes
Standard Andis Blade With hair grain 1/16" to 3/16"
of blade to blade pad (see Diagram H) and
replace screws. Do not tighten down screws Against hair grain 1/32" to 1/8"
completely. Turn cl

ページ2に含まれる内容の要旨

C E L S R O I E W C T K K N (These instructions only apply for trimmers that have a 2-prong not have a blade guard). Plug cord into electrical outlet, operate CARE AND SERVICING OF YOUR ANDIS IMPORTANT SAFEGUARDS plug). To reduce the risk of electric shock, this appliance has a at 120 volt, 60 cycle AC electrical current or as noted on the unit. CLIPPER/TRIMMER BLADES When using an electrical appliance, basic precautions should polarized plug (one blade is wider than the other). This plug will T